• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.4
• /
• pp.512-515
• /
• 2005

An in vitro study was conducted to determine the effect of C18-polyunsaturated fatty acid on direct incorporation into the rumen bacteria, bio-hydrogenation and production of CLA in vitro. Sixty milligrams of linoleic acid ($C_{18:2}$) or linolenic acid ($C_{18:3}$) were absorbed into the 0.5 g cellulose powder was added to the 150 ml culture solution consisting of 120 ml McDougall's buffer and 30 ml strained rumen fluid. Four uCi of 1-$^{14}C_{18:2}$ or 1-$^{14}C_{18:3}$ (1 uCi/15 mg each fatty acid) were also added to the corresponding fatty acids to estimate the direct incorporation into the bacterial lipids. The culture solution was then incubated anaerobically in a culture jar with stirrer at 39$^{\circ}C$ for 12 h. Ammonia concentration and pH of the culture solution were slightly influenced by the fatty acids. Amount of fatty acid incorporated into the bacteria was 1.20 mg and 0.43 mg/30 ml rumen fluid for $C_{18:2}$ and $C_{18:3}$, respectively during 12 h incubation. Slightly increased CLA (sum of cis-9, trans-11 and cis-10, trans-12 $C_{18:2}$) was obtained from the $C_{18:3}$ addition compared to that from $C_{18:2}$ after 12 h incubation in vitro.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.368-368
• /
• 2007

Zinc oxide (ZnO) has drawn much interest as a potential transparent conducting oxide (TCO) for applying to solar cell and front electrode of electro-luminescent devices. For the enhancement of electrical property of TCOs, dopant introduction and hybridization with conductive nanoparticles have been investigated. In this work, ZnO films were formed on glass substrate by using photochemical solution deposition of Ag nanoparticles dispersed or various metal (Ag, Cd, In, or Sn) contained photosensitive ZnO solutions. The usage of photosensitive solution permits us to obtain a micron-sized direct patterning of ZnO film without using conventional dry etching procedure. The structural, optical, and electrical characteristics of ZnO films with the introduction of metal dopants with/without Ag nanoparticles have been investigated to check whether there is a combined effect between metal dopants and Ag nanoparticles on the characteristics of ZnO film. The phase formation and crystallinity of ZnO film were monitored with X-ray diffractometer. The optical transmittance measurement was carried out using UV-VIS-NIR spectrometer and the electrical properties such as sheet resistance and conductivity were observed by using four-point probe.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.353-361
• /
• 2022

Linear Elastic Fracture Mechanics (LEFM) has been developed by applying stress analysis to determine the stress intensity factor (SIF, K). The finite element method (FEM) is widely used as a standard tool for evaluating the SIF for various crack configurations. The prediction accuracy can be achieved by applying an adaptive Delaunay triangulation combined with a FEM. The solution can be solved using either direct or iterative solvers. This work adopts the element-by-element preconditioned conjugate gradient (EBE-PCG) iterative solver into an adaptive FEM to solve the solution to heal problem size constraints that exist when direct solution techniques are applied. It can avoid the formation of a global stiffness matrix of a finite element model. Several numerical experiments reveal that the present method is simple, fast, and efficient compared to conventional sparse direct solvers. The optimum convergence criterion for two-dimensional LEFM analysis is studied. In this paper, four sample problems of a two-edge cracked plate, a center cracked plate, a single-edge cracked plate, and a compact tension specimen is used to evaluate the accuracy of the prediction of the SIF values. Finally, the efficiency of the present iterative solver is summarized by comparing the computational time for all cases.

• Korean Journal of Microbiology
• /
• v.12 no.1
• /
• pp.25-30
• /
• 1974

It was convinced that with a relatively small capital investment and with a low operating cost, appreciable amounts of cement copper could be produced from low-grade minerals by the application of a bacterial leaching method. For the recovery of cement copper from the impure pregnant solution, direct precipitation of copper with tin plates by a bacterial leaching method was feasible. The results obtained were as follows: 1)In order to remove the cement copper from the reducing metal, aeration and agitation method were more effective and economic than shaking method. 2)The rate of copper recovery from the pregnant solution was accerelated according to increasing quantities of reducing metal. However, the excess of reducing metal reduced the grade of cement copper. 3)Among the comparative experiments of copper recovery at each reaction temperature of $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, the recovery rate of copper at $30^{\circ}C$from the pregnant solution was highest. 4)Direct cementation method on iron-containing metal was an excellent method for the recovery of cement copper in bacterial leaching.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.6
• /
• pp.396-401
• /
• 1986

The method of steepest descent is applied to the analysis of electrostatic problems. The differences between iterative method and direct method, e.g. the method of moments, are not lined. It is shown that this method converges monotonically to the exact solution and is suitable for solving a problem of large system. Numerical results are presented for electrostatic case which show a good agreement with momet solution.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.27-32
• /
• 1986

This study is aimed at synthsizing high dielectric material (Ba, Sr)$TiO_3$ through direct wet process. Pure and ultra fine particle of (Ba, Sr)$TiO_3$ Powder was synthesized from $BaCl_2$ $SrCl_2$ and TiCl4 aqeous solution at KOH Solution in the $N_2$ gas atmosphere. $BaCl_2$ $SrCl_2$ and TiCl4 were Mixed with the mole ratio of 1:9, 3:7:10, 5:5:10, 7:3:10, 9:1:10 and sythesized at 4$0^{\circ}C$~9$0^{\circ}C$ for 10min~15hrs. The particle size particle shape crystallinity and synthesis condition of (Ba, Sr)$TiO_3$ powder with the variation of temperature and reaction time in the aqueous solution studied by the exprimental instruments of DTA. TGA, X-ray diffratometer SEM.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.580-583
• /
• 2002

This paper presents a novel pose description corresponding to the structure characteristics of parallel manipulators, which is convenient and intuitionistic to us. A class of 3-RSR parallel manipulator is considered here. Through analysis on geometry theory, we obtain a new method of the closed-form solution to the forward kinematics. The closed-form solution contains two different meanings-analytical and real-time. So we reach the goal of practical application and control. A numerical example is also presented and are verified by an inverse kinematics analysis. It shows that the method has a practical value for real-time control.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.30-39
• /
• 2003

This paper presents the business model and system functionalities of a B2B e-marketplace solution that not only can overcome some problems of the public e-marketplace, but also can be applicable to both public and private types of e-marketplaces. This solution is different from the most of the public e-marketplace solutions that their main sources of revenue are transaction commissions or transaction fees through the third-party intermediation. Instead, this solution provides an ASP (Application Service Provider) functionality for direct, disintermediated purchasing and sales-related transactions between suppliers and buyers. With this functionality, suppliers and buyers electronically commerce with each other without the disclosure of their transactions as well as transaction commissions.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.77-86
• /
• 2005

Low temperature bonding of the silicon and glass using the Spin-on Glass (SOG) has been conducted experimentally to figure out the effects of the SOG solution composition and process variables on bond strength using the Design of Experiment method. In order to achieve the high quality bond interface without rack, sufficient reaction time of the optimal SOG solution composition is needed along with proper pressure and annealing temperature. The shear strength under the optimal SOG solution composition and process condition was higher than that of conventional anodic bonding and similar to that of wafer direct bonding.