고체 시료를 직접 분석하기 위하여 글로우 방전 원자 방출법을 이용한 새로운 장치를 개발하였다. 이 시스템은 기존의 gas-jet boosted nozzle을 개선한 새로운 방전 셀과 Radio-frequency 전원장치를 사용하였다. 기존의 gas-jet boosted nozzle의 경우 재침전이 적고, 시료 손실량이 많아서 낮은 방전 전력에서 저 합금강의 미량 분석에 적합하였다. 하지만 높은 방전 전력을 사용할 경우 시료 손실량이 많아지고, 재석출(redeposition)이 증가함으로 해서 플라스마가 불안정해지는 단점을 지니고 있었다. 기존의 글로우 방전 셀의 경우 방전 전력을 높일 수록 플라스마의 들뜸 온도가 증가하는 경향을 가진다. 이 때문에 높은 방전 전력에서는 플라스마의 온도가 높아져서 극미량 분석이 가능할 수 있지만, 기존의 노즐 부분에 문제점으로 인해 높은 방전 전력으로 분석하기에는 부적합하였다. 이러한 문제점을 modified gas-jet boosted nozzle은 시료 손실량이 같은 방전 전력에서 기존의 가스 제트 흐름노즐에 비하여 감소하지만 높은 방전 전력에서는 플라스마 안정도가 증가하여 극미량 분석이 가능하도록 개선하였다. 본 시스템은 여러 가지 방전에 미치는 실험 변수인 압력과 가스 흐름량 그리고 방전 전력의 변화에 따른 시료 손실 속도와 방출 세기 등의 변화를 측정하여 최적화 하였으며, 표준 시료 Fe합금을 이용하여서 미량 분석을 하였다.
Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.
Purpose - This research analyzes overseas expansion support systems for small- and medium-sized enterprises in Germany and Japan. Germany and Japan have developed overseas expansion support policies for such enterprises. The study then explores the implications for Korea and its local governments. Research design, data, and methodology - We did a comparative analysis of Japan and Germany and their support for overseas expansion of small and medium companies. Data were mainly collected from the Ministry of Economy, Trade and Industry (Japan) and the Germany Trade and Invest (Germany) agency through statistics and literature surveys, and analysis studies. Results - First, human resources cultivation and funding support policies, which both Germany and Japan use as part of small- and medium-sized enterprise policies, should be modified to Korean circumstances and to reflect its own small- and medium-sized enterprise support needs. Second, both the German policies that support overseas expansion of small- and medium-sized enterprises and those of Japan's include the philosophy and methods that put an emphasis on these enterprises, despite the fact that there are big differences in the overseas policies in these two countries. Third, German and Japanese governments are embracing the idea that small- and medium-sized enterprises are key to their national economies and implementing policies based on the ratio occupied by these enterprises in the domestic consumption or GDP. In other words, Germany and Japan consider small- and medium-sized enterprises as central to their nation's industry, and assess them as economic industry that should definitely exist for the continued survival of big businesses, and not just as merely supplemental to big business. Fourth, whereas Germany emphasizes support to product exhibition in its overseas expansion support policies, Japan is providing integrated support containing foreign direct investment to small- and medium-sized enterprises. Fifth, there are differences in the overseas expansion support in Germany and Japan in terms of their support to big business. Whereas Germany considers support to big business unnecessary, Japan is implementing active support policies to areas corresponding to big business. Korea will have to benchmark the policies of Germany and Japan, and decide whether or not to give full support to small- and medium-sized enterprises, while excluding areas supporting big business. Conclusions - Based on this analysis of German and Japanese overseas expansion support policies, we need to choose the policies that will engender a solid outcome and derive modified policies for the circumstances of Korea. Additionally, we can use the comparison of the overseas support policies of Japan and Germany to choose small- and medium-sized enterprise overseas expansion support policies for Korea. However, we cannot provide specific overseas support policies by industry. This point will be referenced as a limitation of this study. In future research, we expect that some researchers will take an empirical approach to exploring Korean overseas expansion support through collecting cases of overseas support policies and interviewing policy authorities.
본 연구는 100ppm의 Gibbetellin을 만개기 전과 후 10일 각 1회(계2회) 과방에 침지 처리한 Dleaware 포도이 무핵재배에서 생육에 따른 엽${\cdot}$신초${\cdot}$과립이 주요성분의 경시적 진전특성과 상호관련성 및 과립의 품질구성요인들과 감미비와의 관련성을 구명한 바 그 결과는 다음과 같았다. 1. 과립중의 누적생장곡선은 double sigmoid 양상을 보여 발육주기는 3기로 나눌 수가 있었으나 $GA_3$처리에 의향 그 특성이 약화된 것으로 나타났다. 2. 과실비대와 각 성분의 변동과의 관계를 보면 경엽의 회분, 전탄소 전질소, 총탄수화물의 함량은 과실의 비대와 성숙과는 별다른 관계가 인정되지 아니 하였으나, 당과 전분은 밀접한 관계를 보여 전당함량은 과실의 비대 성숙기에는 감소하며 수확후는 급증하였다. 신초의 전분함량은 성숙의 진해으로 감소하다가 수확후는 증가하였으먀, 특히 경엽의 전당함량은 신초의 전분함량이 증가하는 수확후 11월에는 급감하여 전분으로 전류가 일어난다고 판단되었다. 3. 과립의 가용성고형물함량돠 환원당함량은 발육 제3기에 급증하였고 적정산과 유기산함량은 당이 급격히 축적하는 시기에는 급감하였다. 4. 과랍의 경도는 발육 제1기에 증가하다가 제2기에는 정체를 보인후 제3기에는 급감하엿다. 점도는 생육 제2기까지는 정체를 보인후 제3기에는 급증하였다. pH,점도는 고도의 正의 상관관계를 보였고 명도와 경도는 고도의 負의 상관을 보였다. 경로계수 분석에서 pH(0.9090), 경도(0.5938), 점도(0.3550)는 正의 직접효과를, 명도(-0.3554)는 負의 직접효과를 보였다.
Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.
1 GW/$cm^2$ 이상의 고강도의 레이저 빔을 얇은 금속 호일의 한 점에 집중시키면, 레이저 삭마현상에 의해 발생된 충격파가 금속 호일 안으로 전파하게 된다. 이 충격파는 금속 호일의 반대 면에서 팽창파로 반사되고, 그 과정에서 금속 호일에 급격한 변형이 일어난다. 이 때, 금속 호일의 반대 면에 미세한 마이크로 단위 크기의 입자들을 코팅하면, 금속의 순간적인 변형으로 인해 입자들이 큰 운동량을 얻으며 가속되어 빠른 속도로 튕겨져 나가게 되는데 이것이 바이오리스틱 약물 전달의 원리이다. 이번 연구에서는 바이오리스틱 시스템의 제어성, 안정성, 효율을 향상시키고자 컨파인 조건을 변화시키며, 인체의 연한 조직을 모사하는 3% 젤라틴 용액으로의 침투 모습을 파악하였다. 사용한 컨파인 매질은 BK7 유리, 물, 그리고 초음파젤(RHAPAPHRM Co. Ltd)이다. 실험결과, 컨파인 매질과 그 두께를 조절함으로써 마이크로 입자들의 침투 양상을 제어할 수 있음을 확인하였다.
음식물쓰레기의 발생량과 조성점유율이 증대됨에 따라 음식물쓰레기의 효율적인 처리 및 처분이 쓰레기 관리행정의 성공여부를 좌우하므로 도시규모별, 발생원별 음식물쓰레기의 양과 조성 그리고 단위 가정 및 퇴비화 의무대상업소에서의 배출현황을 조사하여 이를 통한 수거체제를 고찰하였다. 대전시와 충청남도 5개 표본도시로부터 조사한 음식물쓰레기의 연평균 조성은 50%를 넘고 있으며 주택가, 아파트, 상가지역간 조성비의 차이는 거의 없다. 종이류가 약 25% 정도를 유지하고 있기 때문에 매립장에 유입되는 일반폐기물의 75% 이상이 퇴비화로 처리가 가능하다. 음식물쓰레기 발생원단위는 단위가정조사의 경우 200~250g/인 일이며 매립장에서 전체 발생 쓰레기를 기준으로 조사할 경우 380~400g/인 일이다. 이는 가정의 구성원이 가정에서보다 가정 밖에서 2배에 가까운 음식물쓰레기를 배출하고 있음을 시사해 주고 있다. 음식물쓰레기 감량화 의무대상업소인 연구소와 관공서의 음식물쓰레기 원단위는 각각 166g/인 일과 215g/인 일로 조사되었고 대중음식점의 경우 수준에 따라 발생원단위는 현저하다. 고급인 경우 670g/인 일, 중급은 190g/인 일 그리고 대중음식점은 평균 60g/인 일이다. 1급 호텔의 경우 400g/인 일이며 집단급식소인 대학교 학생회관의 경우 170g/인 일로 조사되었다. 가정용 퇴비화 용기내에서 자연감량율은 1일 3~4%의 수준을 나타내고 있다.
Recently hexagonal boron nitride (h-BN), III-V compound of boron and nitrogen with strong covalent $sp^2$ bond, is a 2 dimensional insulating material with a large direct band gap up to 6 eV. Its outstanding properties such as strong mechanical strength, high thermal conductivity, and chemical stability have been reported to be similar or superior to graphene. Because of these excellent properties, h-BN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Ultra flat and charge impurity-free surface of h-BN is also an ideal substrate to maintain electrical properties of 2 dimensional materials such as graphene. To synthesize a single or a few layered h-BN, chemical vapor deposition method (CVD) has been widely used by using an ammonia borane as a precursor. Ammonia borane decomposes into hydrogen (gas), monomeric aminoborane (solid), and borazine (gas) that is used for growing h-BN layer. However, very active monomeric aminoborane forms polymeric aminoborane nanoparticles that are white non-crystalline BN nanoparticles of 50~100 nm in diameter. The presence of these BN nanoparticles following the synthesis has been hampering the implementation of h-BN to various applications. Therefore, it is quite important to grow a clean and high quality h-BN layer free of BN particles without having to introduce complicated process steps. We have demonstrated a synthesis of a high quality h-BN monolayer free of BN nanoparticles in wafer-scale size of $7{\times}7cm^2$ by using CVD method incorporating a simple filter system. The measured results have shown that the filter can effectively remove BN nanoparticles by restricting them from reaching to Cu substrate. Layer thickness of about 0.48 nm measured by AFM, a Raman shift of $1,371{\sim}1,372cm^{-1}$ measured by micro Raman spectroscopy along with optical band gap of 6.06 eV estimated from UV-Vis Spectrophotometer confirm the formation of monolayer h-BN. Quantitative XPS analysis for the ratio of boron and nitrogen and CS-corrected HRTEM image of atomic resolution hexagonal lattices indicate a high quality stoichiometric h-BN. The method presented here provides a promising technique for the synthesis of high quality monolayer h-BN free of BN nanoparticles.
최근에 재조합 H7Nx 인플루엔자 바이러스가 산발적으로 인체 감염 사례가 보고되고 있으며 이러한 바이러스는 조류 종으로부터 지속적으로 분리되고있다. 본 연구에서는 조류에서 유래된 H7N1 인플루엔자 바이러스를 분리하여 A/wild bird/South Korea/sw-anu/2023로 명명하였고, 전장유전체 분석과 분자적 특성을 분석하였다. 계통발생학적 분석 결과 A/wild bird/South Korea/sw-anu/2023는 유라시아 혈통에 속하는 H7N1 인플루엔자 바이러스로 확인되었다. A/wild bird/South Korea/sw-anu/2023 바이러스의 polymerase basic 1(PB)2, PB1, polymerase acidic (PA), nucleoprotein (NP) 유전자는 야생 조류에서 분리되었던 조류 인플루엔자 바이러스유전자와 밀접한 관련이 있는 것으로 밝혀졌으며, hemagglutinin (HA), neuraminidase (NA), matrix (M), nonstructural (NS) 유전자는 집오리에서 분리되었던 조류 인플루엔자 바이러스와 유사하였다. 이러한 결과는 동아시아-호주 이동 경로를 따라 이동하는 야생 조류들 사이에서 새롭게 유전자가 재배열된 재조합 H7N1 조류 인플루엔자 바이러스가 순환되고 있음을 시사하고 있다. 따라서, H7Nx 인플루엔자 바이러스는 전 세계적으로 순환하며, 돌연변이된 H7N1 조류 인플루엔자 바이러스는 인간을 감염시킬 수 있으므로 야생 조류 및 가금류에서 H7N1 조류 인플루엔자 바이러스의 지속적인 감시가 필요할 것이다.
본 연구에서는 2002년 8월부터 2003년 7월까지 우포늪 수계에서의 이온농도, 부유물 농도 및 서식지 특성에 대한 계절성 강우패턴의 영향을 평가하였다. 총부유물질(TSS)의 공간적 변이는 하절기의 장마기간 동안 가장 현저하게 나타났다. TSS 중 무기부유물의 상대비율(ISS:TSS)은 크게 증가했으며 이는 상류에서 하류로 갈수록 증가하는 양상을 보였다. 이런 현상은 낙동강 본류로부터 역류하는 탁수에 기인하는 것으로 사료되었다. 장마기간 동안 ISS:TSS의 비율은 상류(43%)보다 하류(92%)에서 크게 증가한 수치를 보였다. 또한 투명도는 하류역으로 갈수록 감소였으며 (평균=0.13 m, 범위=0.08-0.21), 탁수는 조류생장 및 1차생산력에 직접적으로 영향을 미쳐 낮은 엽록소-a값 (범위=$4.2-8.6\;{\mu}g\;L^{-1}$)을 보였다. 2차 조사 시 ISS 농도는 평균 4 mg $L^{-1}$ (범위=3.3-4.8 mg $L^{-1}$)였고, 이런 값은 홍수기 조사인 1차 조사에 비해 14배나 감소한 수치였다. 한편, ISS는 크게 감소한데 비해 OSS의 상대비는 높게 증가했다. 이러한 현상은 3차 조사에서도 같은 양상으로 나타났으나 5월에 실시된 4차 조사에서는 상이한 결과를 보였다. 10개 변수를 기반으로 한 정량적 서식지 평가에 따르면, QHEI는 4차 조사에서 최대값을 보였으며, 2차 조사에서는 가장 큰 공간적 변이를 보였다. 결과적으로, 장마기간의 집중강우는 토평천과 우포늪에서의 토사 침전 및 영양물질 순환에 크게 기여하는 것으로 사료되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.