• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.93-96
• /
• 2011

Currently, the development of direct conversion radiation detector using photoconductor materials is progressing in widely. Among of theses photoconductor materials, mercuric iodide compound than amorphous selenium has excellent absorption and sensitivity of high energy radiation. Also, the detection efficiency of signal generated in photoconductor film varies by electric filed and geometric distribution according to top-bottom electrode size. Therefore, in this work, the x-ray detection characteristics are investigated about the size of top electrode in $HgI_2$ photoconductor film. For sample fabrication, to solve the problem that is difficult to make a large area film, we used the spatial paste screen-print method. And the sample thickness is $150{\mu}m$ and an film area size is $3cm{\times}3cm$ on ITO-coated glass substrate. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a magnetron sputtering system and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$. From experimental measurement, the dark current, sensitivity and SNR of the $HgI_2$ film are obtained from I-V test. From the experimental results, it shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high dark current. Therefore, the optimized size of electrode is importance for the development of photoconductor based x-ray imaging detector.

• Journal of Plant Biotechnology
• /
• v.40 no.4
• /
• pp.210-216
• /
• 2013

Efficient regeneration methods and transformation system are a priority for successful application of genetic engineering to vegetative propagated plants such as grape (Vitis labrusca L.). This research is to establish shoot regeneration system from plant explants for 'Campbell Early', 'Tamnara', 'Heukgoosul', 'Heukbosek' using two types of plant growth regulators supplemented to medium. The highest adventitious shoot regeneration rate of 5% was achieved on a medium containing of Murashige and Skoog (MS) inorganic salts and Linsmaier and Skoog (LS) vitamins, 2 mg/L of TDZ and 0.1 mg/L of IBA. Leaf tissue of 'Campbell Early', was co-cultivated with Agrobacterium strains, LBA4404 containing the vector pBI121 carrying with CaMV 35S promoter, gus gene as reporter gene and resistance to kanamycin as selective agent, the other Agrobacterium strains, GV3101 containing the vector pB7 WG2D carrying with mPAP1-D gene. mPAP1-D is a regulatory genes of the anthocyanin biosynthetic pathway. 'Campbell Early' harboring mPAP1-D gene was readily able to be selected by red color due to anthocyanin accumulation in the transformed shoot. These results might be helpful for further studies to enhance the transformation efficiency in grape.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.660-667
• /
• 1998

Background: This study is to evaluate the effectiveness and application of Lecompte procedure as a treatment for various complex cardiac anomalies with pulmonary outflow tract obstruction. Methods: Between July 1988 and December 1997, 44 patients underwent Lecompte procedure in Seoul National University Children's Hospital. The male to female ratio was 24 to 20 and the mean age was 29.2 months(range, 3 to 83). Of these patients, 28(63.6%) had transposition of great arteries with ventricular septal defect and pulmonary stenosis(or pulmonary atresia), 14(31.8%) had double outlet right ventricle with pulmonary stenosis(or pulmonary atresia), and so on. The principles of the technique are 1) extension of the ventricular septal defect or conal resection, 2) construction of a intracardiac tunnel connecting the left ventricle to the aorta, and 3) direct connection, without a prosthetic conduit, of the pulmonary trunk to the right ventricle. Results: There were 3 in-hospital deaths and their causes were sustained hypoxia, myocardial failure, and sepsis, respectively. There was 1 late death due to sepsis. Reoperations were performed in 6 patients who had pulmonary outflow tract obstructions(4 cases), residual muscular ventricular septal defect(1 case), and recurrent septic vegetation(1 case). The cumulative survival rates by the Kaplan-Meier method were 92.7%, 92.7%, and 92.7% at 1, 2, and over 4 years. The reoperation free survival rates were 92.7%, 92.7%, and 70.2% at 1, 3, and over 5 years. Among the risk factors for the operative death, aortic cross clamping time had statistical significance(p<0.05) and all the risk factors for the recurrent pulmonary stenosis such as age, pulmonary artery index, and materials used for the pulmonary outflow tract reconstruction had no statistical significance(p>0.05). Conclusions: Our review suggests that Lecompte procedure is an effective treatment modality for various complex cardiac anomalies with pulmonary outflow tract obstruction. Repair in early age is possible and the rates of mortality and morbidity are also acceptable.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.356-364
• /
• 2002

Background: This study was undertaken to investigate the outcome of composite graft aortic root replacement using coronary button reimplantation technique for the treatment of aneurysms of the ascending aorta involving the aortic root. Material and Method: Between April 1995 and September 2001, 54 patients having aortic root replacement with a composite valve graft using direct coronary button reimplantation were reviewed retrospectively. Left ventricular dysfunction was present in 14 patients(25.9%), aortic regurgitation in 48(89%), and Marfan's syndrome in 17(31.5%). The indications for operation were annuloaortic ectasia in 29 patients(53.7%), aortic dissection in 11(20.4%), aneurysms of the ascending aorta involving aortic root in 12(22.2%), and aortitis in 2(3.7%). Six patients(11.1%) had previous cardiac or ascending aortic operations. Concomitant procedures were arch replacement in 21 patients(38.9%), coronary artery bypass graft in 7(13%), mitral valve repair or replacement in 4(7.4%), and others in 6. The mean time of circulatory arrest, total bypass, and aortic crossclamp were 18 $\pm$ 9 minutes, 177 $\pm$ 42 minutes, and 127 $\pm$ 31 minutes, respectively. Result: There was 1 early death(1.9%). Mean follow-up was 24.6$\pm$ 19.5 months. There were two late deaths(3.8%) including one death due to the traumatic cerebral hemorrhage. The Kaplan-Meier survival rate was 98.0 $\pm$ 2.0% and 93.1 $\pm$ 5.1% at 1 and 6 years, respectively. Two patients required reoperation owing to a false aneurysm at the root anastomosis site and a malfunction of prosthetic aortic valve(3.8%). Staged operation for dissection of the remaining thoracoabdominal aorta was performed in 1 patient. The freedom rate from reoperation was 97.8 $\pm$ 2.0% and 65.3 $\pm$ 26.7% at 1 and 6 years, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.97-112
• /
• 1978

The rule 15, 16 and 17 of International Regulations for Preventing collisions at Sea direct actions to avoid collision when two power-driven vessels are crossing. But these rules do not present the safety minimum approaching distances outside which a give- way vessel deeps out of the way of a stand-on vessel. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship kinematics as the method to calculate this distance. The author worked out mathematic formulas for calculating the safety minimum approaching distances outside which the give-way vessel takes the actions to avoid collisions in accordance with the cross angles of the crossing vessels' courses. Figuring out actually the values of maneuvering indices of the M. S. Koan Ack San (GT: 224tons), the training ship of the National Fisheries University of Busan and the M. S. Golden Clover (GT: 101, 235tons) of the Eastern Shipping Co., Ltd. through their Z test, the author applied these values to the calculating formulas and calculated the safety minimum approaching distances. The results of calculations are as follows; 1. The greatest distance is to be kept by the give-way vessel to avoid collision when the cross angle of courses is 90$^{\circ}$ or near it. In such case the safety minimum approaching distance of a small vessel must be more than 5 times of her own length and that of a large vessel more than 11 times of her own length. 2. Collision danger is greater when crossing angle is obtuse than in an acute angle, therefore greater distance is to be kept by the give-way vessel to avoid collision in the case of the obtuse angle. 3. The actions to be taken to avoid collisions by the give-way vessel in Rule 16 and by the stand-on vessel in Rule 17(a)(ii) of International Regulations for Preventing Collisions at Sea, must be done outside the above safety minimum approaching distance. When inevitably such actions are to be taken within the safety minimum approaching distance, they should be accompanied with engine motions.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.389-396
• /
• 1994

Background : The two most important purposes of fiberoptic bronchoscopy in lung cancer patients are obtaining tissue diagnosis and staging. The direct sign of lung cancer on FOB includes visible tumor, with smooth or nodular surface, with or without necrosis and infiltration. Variant cell types of lung cancer have their characteristic biological behaviors respectively. For example, squamous cell carcinoma grows slowly, invades locally and has easy necrosis resulting in cavitation, whereas adenocarcinoma shows early metastasis, small cell carcinoma shows rapid growth and higher early metastasis rate. Based on this, it could be hypothesized that each cell type may have characteristic bronchoscopic finding. Method : To answer this question, we reviewed 106 cases which were diagnosed as primary lung cancer and had bronchoscopically visible specific cancerous lesions. Results : The results were as follows. 1) Squamous cell carcinoma accounted for 66 cases(62.2%), adenocarcinoma 15 cases(14.2%), large cell carcinoma 3 cases(2.8%). 2) The endobronchial tumor lesion was arbitrarily classified into 5 types according to gross characteristics. Type A, multilobulating mass with necrosis, accounted for 24.5%, type B, multilobulating mass without necrosis, 25.5%, type C, round beefy mass, 9.4%, type D, infiltration with mucosal irregularity, 6.6%, and type E, infiltration without mucosal irregularity, 34%. 3) The analysis of correlation between endobronchial tumor pattern and specific cell type revealed that squamous cell carcinoma had relation with the morphologic type B and small cell carcinoma had relation with the morphologic type E, but adenocarcinoma had no preponderance in morphologic type. The gross appearance had influence on the diagnostic yields of biopsies and the diagnostic yields of lobulating mass types(type A, B) were higher than those of other types. Conclusion : From the above observations, it could be concluded that squamous cell carcinoma and small cell carcinoma have relations with specific types of bronchoscopic morphology, but not the case in adenocarcinoma.

• Research in Community and Public Health Nursing
• /
• v.4 no.1
• /
• pp.67-76
• /
• 1993

The purpose of this study was to find the status of health examination and health management of industrial companies located in Taegu and Kyung book areas. It will provide basic information for the provision of effective health management of industrial workers. 49 companies were selected as a study sample group, and data was collected by using a structured Questionnaire which was developed by the members of the Community Health Nursing Academy of Korean Nursing. The health managers of the companies filled out the Questionnaire. The data was gathered from Dec 20, 1992 to Jan 20. The results of the study was as follows : 1. The Study sample showed 85.7% manufacturing companies having 300 or more workers. 2. All the companies had health managers, and companies which had 1,000 or more workers had industrial physicians and nurses. Only 12.2% of the industrial physicians were full time employees, and almost all industrial nurses were full time employees. Except for industrial physicians and nurses, the proportion of hygienists (6.1%), nurses aids (4.1%), and environmental engineers (22.4%) with full time employment statuss was very low. The mean age of industrial physicians was 49.2 while that of industrial nurses was 27.2. The length of work experiences currently ranges for 1 to 3 years for all health workers: physicians, nurses, hygienists, and environmental engineers. 3. Health examination and follow up care 94.31% took general health examinations. Of those, the proportion of the workers, who were determined as C grade(in need of close examination) was 43.86%. The proportion of the workers who were determined as D grade was 22.19%. 13.28% of the workers evaluated at the D grade were taken as a gauge for temporary leave from work. While 8.7% and .09% of them were taken as gauge for a change in job, and or shortening work hours respectively. The proportion of workers who must have taken special examination was 65.04% and of those the proportion of the workers who actually took, the examination was 98.55%. 75% of the workers who were recommended for follow up care were given follow up care. The special examinations were done the most frequently to detect the effects of physical agents (59.2%). Direct notice to individual workers was used the most frequently as a method of notification after a special examination (61.2%). The length of time taken to receive the result of a special examination was less than 1 month (38.9%) and 36.7% had taken up to two months (36.7%.). Most results of special examination were obtained within 2 months. The referral rate of consulting special examination by health managers was estimated at 95.9%. 4. 89.8% of the companies had. their own company dispensaries and 75.5% of those. had separate dispensaries. 32.7% of the companies designated local clinics for health management of workers. Industrial nurses performed health examination the most frequently(1.4 points). Health appraisal for work places were. done the least(0.83 points).

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.90-96
• /
• 2019

Natural gas has been regarded as one of major alternative fuels, because of the increment of mining shale gas and supplying PNG(Pipeline Natural Gas) from Russia. Thus, it needs to broaden the usage of natural gas as the increasing its supplement. In this situation, application of natural gas on the transport area is a good suggestion to reduce exhaust emissions such as CO₂(carbon dioxides) and soot from vehicles. For this reason, natural gas can be applied to SI(spark ignition) engines due to its anti-knocking and low auto-ignitibility characteristics. Recently, since turbocharged SI engine has been widely used, it needs to apply natural gas on the turbocharged SI engine. However, there is a major challenge for using natural gas on turbocharged SI engine, because it is hard to make natural gas direct injection in the cylinder, while gasoline is possible. As a result, there is a loss of fresh air when natural gas is injected by MPI (multi-point injection) method under the same intake pressure with gasoline-fueled condition. It brings the power reduction. Therefore, in this research, intake pressure was increased by controling the turbocharger system under natural gas-fueled condition to improve power output. The goal of improved power is the same level with that of gasoline-fueled condition under the maximum torque condition of each engine speed. As a result, the maximum power levels, which are the same with those of gasoline-fueled conditions, with improved brake thermal efficiency could be achieved for each engine speed (from 2,000 to 6,000 rpm) by increasing intake pressure 5-27 % compared to those of gasoline-fueled conditions.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.307-316
• /
• 2007

Yellow poplar (Liriodendron tulipifera L.) has low germination rate relatively other species, so the seedling production of Yellow poplar is a hard task. Accordingly this study was conducted to determine the optimal germination conditions for healthy seedling production and to promote survival rate after afforestation. Gemination percentage was examined at different media and seed covering materials using planting flats in the greenhouse. The best germination percentage was observed in sand for media and compound soil for covering materials. But it was time to transplant, seedlings became a poor character (i.e. height, root length, number of root, dry weight) in sand for media. In order to produce healthy seedlings, each different medium was compounded with TKS-2 (this is a gardening bed soil.) in the ratio 1:1 (v/v.), and compared two conditions. Quality of seedling was better than not mixed TKS-2 into each medium. Transplanting seedlings from greenhouse to nursery grew up rapidly 2 months later (early in August~early in October). Growth amount during two months corresponded to 85.6% and 71.3% in total growth amount of height and diameter at root collar, respectively. In the case of the competition-density effect on yellow-poplar seedlings, direct seedling produced the maximum 35 standard seedlings above 8 mm of root collar diameter per $m^2$, while transplanting seedling produced the maximum 64 standard seedlings per $m^2$. And produced seedlings of two way were significantly different rootlet while axial root and lateral root was not significantly different.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.21-28
• /
• 1986

Conversion of anaerobic mesophilic digestion to thermophilic range has been investigated using a synthetic sludge. When temperature was raised at a rate of 2, 1, and $0.5^{\circ}C$ per day with continuous feeding, a lower reaction rate was observed with a high rate of temperature change. Although methane fermentation ceased completely for an digesters at thermophilic temperature, acid fermentation continued. Methane fermentation was never achieved even with neutralization during 6 months of resting. The methane formers were completely inactivated by the temperature shock and accumulation of volatile acids due to continuous feeding, while the acid formers lost biological activity quickly, but gradually acclimated to a high temperature. When temperature was raised without feeding, successful thermophilic digestion was achieved with 1 day of resting at thermophilic temperature at a rate of $1^{\circ}C$ per day, and also achieved with 20 days of resting at a direct increase. Conversion to a thermophilic range is easily achieved with resting. A short period of resting is required at a low rate of temperature increase, while a long period of resting enough to balance methane formers with acid fermers makes a conversion possile when temperature is raised at a high rate. Soured thermophilic digesters were recovered after seeding of mesophilic sludges, and sludge seeding could be a good method of start-up, conversion, or recovery of a thermophilic digester. Significant amount of thermophiles seemed to be present in the mesophilic digesters.