• 에너지공학
• /
• 제26권3호
• /
• pp.71-77
• /
• 2017

피동고압충수용 혼합형 안전주입탱크 (Hybrid SIT)의 압력평형시간은 냉각수 주입시기를 결정하는 주요인자이다. 한국원자력연구원 (KAERI)에서는 Hybrid SIT에서의 내부 열수력적 거동을 고찰하기 위해 개별효과시험 장치를 구축하였으며, 다양한 운전조건에서의 압력평형시간에 대한 민감도 시험을 수행하였다. 개별효과시험을 통해 압력평형시간을 결정하는 주요인자들을 도출하였으며, 그 중 증기의 벽면응축 및 냉각재와의 직접접촉응축이 압력평형시간을 결정하는 주요 현상임을 파악하였다. 본 연구에서는 개별효과 시험결과들을 이용하여 각각의 응축현상들이 압력평형에 미치는 영향을 정량적으로 분석하고 혼합형 SIT의 압력평형시간을 예측하기 위한 방법론을 제시하였다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.285-293
• /
• 2009

Thermal infrared cameras have been conducted actively in various application areas, such as military, medical service, industries and cars. Because of their characteristic of sensing the radiant heat emitted from subjects in the range of long-wavelength($3{\sim}5{\mu}m$ or $8{\sim}12{\mu}m$), and of materializing a vision system, when general optics materials are used, they don't react to the light in the range of long-wavelength, and can't display their optic functions. Therefore, the materials with the feature of higher refractive index, reacting to the range of long-wavelength, are to be used. The kinds of materials with the characteristic of higher refractive index are limited, and their features are close to those of metals. Because of these metallic features, the existing producing method of optical systems were direct manufacturing method using grinding method or CAD/CAM, which put limit on productivity and made it difficult to properly cope with the increasing demand of markets. GASIR, a material, which can be molded easily, was selected among infrared ray optics materials in this study, and the optical system was designed with two Aspheric lenses. Because the lenses are molded in the environment of high temperature and high pressure, they require a special metallic pattern. The metallic pattern was produced with materials with ultra hardness that can stand high temperature and high pressure. As for the lens mold, GMP(Glass Molding Press) of the linear transfer method was used in order to improve the productivity of optical systems for thermal infrared cameras, which was the goal of this paper.

• 공업화학
• /
• 제28권2호
• /
• pp.257-262
• /
• 2017

본 연구에서는 electrospinning method의 공정변수를 다르게 하여 CNF (carbon nanofiber)를 제조하였다. 제조된 CNF의 섬유의 형태, 직경 등의 변화를 SEM 분석을 통해 관찰하였으며 인가전압, TCD (tip to collecor distance), 고분자 용액의 농도, 열처리 단계가 CNF 물성을 형성함에 있어 주요한 영향인자임을 확인하였다. 또한 서로 다른 물성으로 제조된 CNF를 전기분해 공정의 전극으로 적용하여 toluene의 제거 효율을 비교하였고, 이를 통해 anode 뿐만 아니라 cathode 역시 전기분해 효율에 직접적인 영향을 미침을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.218-225
• /
• 2008

When the heat release and acoustic pressure fluctuations are generated in the combustor by irregular combustion, these fluctuations affect the mass flow rate of the propellants injected through the injectors. Also, the variations of the mass flow rate by these fluctuations again bring about irregular combustion and furthermore that is related with combustion instability. Therefore, it is very important to identify the mass variation for the pressure fluctuation on the injector and to investigate its transfer function. So, we first have studied quantifying the variation of mass flow rate generated in simplex swirl injector by injection pressure fluctuation. To acquire the transient mass flow rate in orifice with time, we have tried to measure of the flow axial velocity and liquid film thickness in orifice. The axial velocity is acquired through theoretical approach after measuring the pressure in orifice and the flow area in the orifice is measured by electric conductance method. As results, mass flow rate calculated by axial velocity and liquid film thickness measuring in orifice accorded with mass flow rate acquired by direct measuring method in the small error range within 1 percents in steady state and within 6 percents as average mass flow rate in pulsated state. Hence this method can be used to measure the mass flow rate not only in steady state but also in unsteady state because the mass flow rate in the orifice can acquire with time and this method shows very high accuracy based on the experimental results.

• 한국식품영양과학회지
• /
• 제45권12호
• /
• pp.1784-1791
• /
• 2016

한국인이 마늘을 섭취할 때 주로 사용하는 조리방법으로 8종의 마늘을 준비하여 조리 조건이 마늘의 항산화 활성과 이화학적 특성에 미치는 영향을 살펴보았다. 열처리 강도가 높은 조리법일수록 마늘의 수분 손실이 컸으며, 명도는 낮아지고 황색도는 높아지는 전형적 갈변 현상을 나타내었다. 특히 명도가 가장 낮았던 프라잉과 팬 프라잉으로 조리된 마늘에서는 수용성 고형분 함량 역시 유의적으로 낮아 조리온도가 높을수록 수용성 저분자 물질로부터 불용성 고분자 중합물질을 형성하는 비효소적 갈변반응이 더 가속화되었음을 시사해주었다. 한편 조리된 마늘은 생마늘보다 thiosulfinates 함량이 낮았으며, 이는 열처리에 의해 thiosulfinates가 polysulfides로 분해되었거나, 열전달 매체를 사용한 삶기, 프라잉, 팬 프라잉으로 조리된 마늘에서는 이들 물질이 열전달 매체로 용출되었을 가능성을 시사해주었다. 전자레인지로 조리된 마늘은 다른 마늘보다 유기산과 thiosulfinates, 플라보노이드 성분들이 상대적으로 많이 보유되어 있었으며, 이는 에너지가 낮고 조리시간이 짧은 전자레인지 가열방식에 의해 마늘 속 열에 약한 성분들이 상대적으로 덜 분해된 결과로 볼 수 있다. 높은 온도에서 조리된 마늘들은 총 환원력과 금속 소거능이 높은 경향을 나타내었으며, 이는 색도 결과에 의해 시사된 것과 같이 환원력을 지닌 갈변반응의 중간물질과 최종물질들이 고온 조리 시 더 활발히 생성된 결과로 해석되었다. 물과 기름을 열전달 매체로 하여 조리된 마늘에서는 총 환원력과 플라보노이드 함량이 상대적으로 낮은 경향을 나타내었다. 그러나 생마늘과 조리된 마늘에서 측정된 총 환원력과 플라보노이드 정량 결과는 DPPH 라디칼 소거능 결과와는 다소 일치하지 않았다. 이는 환원성 물질들의 총량이 증가하였음에도 불구하고 우수한 항산화 활성을 지닌 일부 열에 불안정한 플라보노이드와 페놀 화합물들이 조리 중 감소하였을 가능성을 말해준다. 따라서 조리 중 마늘 내부에서 분해 혹은 새로이 생성될 수 있는 개별 환원성 물질들의 조성과 항산화 활성 비교에 대한 후속연구가 필요할 것으로 생각한다.

• The Korean Journal of Physiology
• /
• 제3권1호
• /
• pp.19-28
• /
• 1969

Skin temperatures on 10 sites and rectal temperature at every 10 minutes, oxygen consumption at every 20 minutes were measured on 18 male subjects (ages between 14 and 47 years) after exposure to cold air at $15^{\circ}C$ for two hours in a climatic room. Total body fat measured by means of a skinfold method and ratio of body surface area (S) to body volume (V), S/V, were utilized as basis of observations. Surface area was calculated after DuBois equation and body volume was calculated by our original formula. In influencing on the heat loss from the body core to the cold environment, % fat showed inverse relations, whereas, S/V ratio showed direct relations. Thus these two factors acted antagonistically on the body heat loss. Local skin temperatures showed negative correlations with skinfold thickness on the same site, nemaly, on chest, r=-.567; on back, r=-.507; and on upper arm, r=-.353. The other 7 skin sites showed low correlations with % fat. Minimum mean weighted skin temperature (MWST) showed a negative correlation (r=-.443) with % fat, and showed no correlation with S/V ratio. Oxygen consumption in the cold air at $15^{\circ}C$ increased from the first measurement at 20 minutes after exposure and maintained the same increasing trend up to 120 minutes. ${\Delta}T_R$ was greater in tile lean subjects who showed a greater % change in oxygen consumption. The antagonistic actions of % fat and S/V ratio on the heat loss were manifested by observations as follows: minimum rectal temperature was higher In fat subjects (r=.600) and lower in subjects with a greater S/V ratio (=-.582), ${\Delta}T_R$ was smaller in fat subjects (r=-.738) and greater in subjects with a greater S/V ratio (r=.618). Temperature difference between body core and skin surface (minimum rectal temperature minus minimum MWST) showed a positive correlation with % fat (r=.600) and a negative correlation with S/V ratio (r=-.881). Decrease in the mean body temperature and heat debt, respectively, showed negative correlations with % fat and positive correlations with S/V ratio.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.545-550
• /
• 2015

High Temperature Superconducting (HTS) synchronous generators can be designed with either an air-core type or iron-core type. The air-core type has higher efficiency under rated rotating speed and load than the iron-core type because of the iron losses which may produce much heat. However, the total length of HTS wire in the air-core type is longer than the iron-core type because the generated magnetic flux density of the air-core type is low. This paper deals with designs of 10 MW air-core and iron-core HTS wind power generators for wind turbines. Fully air-core, partially iron-core, and fully iron-core HTS generators are designed, and various stator winding methods in the three HTS generators are also considered, such as short-pitch concentrated winding, full-pitch concentrated winding, short-pitch distributed winding, and full-pitch distributed winding. These HTS generators are analyzed using a 3D finite elements method program. The analysis results of the HTS generators are discussed in detail, and the results will be effectively utilized for large-scale wind power generation systems.

• Journal of Nutrition and Health
• /
• 제29권9호
• /
• pp.1042-1048
• /
• 1996

In order to investigate heating rate of commercial milk products in korean market, lactulose content and availability of calcium and ascorbic acid were measured. The pH range for raw and commercial milk was 6.5-6.75, and protein content was 2.5-3.13%. The acid degree value (。SH)showed between 5.3 and 7.1. There were no differences in pH, protein and acid degree among 3 types of milk. The portion ionic Ca content in UHT-milk(32.4%) and pasteurized milk (27%) increased significantly in comparison with raw milk (4.6%). Pasteurization led to loss of 20% ascorbic acid, and losses of UHT-treatment are approximately twice as high. Significant differences of lactulose content between UHT milk and pasteurized milk were observed. Some of UHT milk products showed very high value of lactulose content like sterilized milk. It is well known that the stress caused by indirect UHT treatment is slightly higher compared with the direct process. The results in this experiment suggested that most of UHT milk in korean market may be treated by indirect UHT method. In oder to keep the adventages of milk component, the heating methods of milk have to be reconsidered.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.662-670
• /
• 2005

With highly oxygenated fuels the smoke emissions decreased sharply and linearly with increases in the fuel oxygen content and entirely disappeared at an oxygen content of $38wt-\%$ even at stoichiometric mixture conditions The NOx also decreased monotonically with increases in oxygen content. and thermal efficiency slightly improved because of a reduction in cooling loss and improvement in the degree of constant volume combustion. The mechanisms of the significant reductions in emissions and improvement in engine performance were analyzed with a bottom view type DI diesel engine. Together with direct flame images, flame images were taken through an optical fetter passing only two wavelengths for use in 2-D two-color analysis. The results showed that luminous flame decreased significantly with increases in oxygen content and was not detected for neat dimethoxy methane(DMM). The decrease in flame luminosity with highly oxygenated fuels corresponds with decreases in soot and cooling losses, including those due to heat radiation. The 2-D two-color flame analysis indicated that the high temperature flame and high KL factor areas apparently decreased with increasing fuel oxygen content. These results correspond strongly with decreases in NOx. smoke. and cooling loss with increases in oxygen content.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.596-603
• /
• 2003

Present study has been conducted to see the relative effects of adding N: to fuel-side and air-side on flame structure, soot formation and NOx emissions. Experiments were carried out to ascertain to what degree chemical kinetics and/or molecular transport effects can explain the differences in soot formation and NOx emission by studying laminar diffusion flames. Direct photograph was taken to see the flame structure. CARS techniques was used to get the flame temperature profiles. And spatial distribution of soot could be obtained by PLII method. CHEMKIN code was also used to estimate the global residence time to predict NOx emissions at each condition. Results from these studies indicate that fuel-side dilution is more effective than air-side dilution in view of NOx emissions. However, air-side dilution shows greater effectiveness over fuel-side dilution in soot formation. And turbulent mixing and heat transfer problems were thought to be considered in practical applications.