• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.230-234
• /
• 2005

Fabrication of MEA is important factor for proton exchange membrane fuel cell (PEMFC). MEA of PEMFC with hot pressing and direct coating method were prepared, and performances were evaluated and compared each other. The effect of MEA preparation methods, hot pressing methods and direct coating methods, on the cell performance was analyzed by impedance spectroscopy and SEM. The performance of PEMFC with direct coating method was better than with hot pressing method because membrane internal resistance and membrane-interfacial resistance were reduced by elimination of hot pressing process in MEA fabrication. In addition the micro structure of MEA with direct coating method reveals uniform interface between membrane and catalyst layer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.626-631
• /
• 2007

MR(Magneto-rheological) fluid is smart material that can be changed viscosity by controlling the magnetic field. MR damper with MR fluid can control damping force. It can be used extensively many engineering structures for reducing the effect of dynamic external disturbances. There are three kinds of MR dampers, such as valve mode, direct-shear mode and squeeze mode. In this study, design process of direct-shear mode MR damper with the MR fluid gap was developed. The parameters that used in the direct-shear mode MR damper Informed from the experiment of valve mode MR damper of Lord company. Magnetic analysis with finite element method was performed to find the optimal annular gap.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.633-638
• /
• 2009

In this study the performance analysis and cooling capacity of desiccant cooling system incorporating regenerative cooler and direct evaporative cooler in the regeneration air inlet were investigated on the condition of low regeneration temperature and time rotation 180s and area ratio of regeneration to dehumidification section 0.7. The cooling capacity and COP are evaluated at various effectiveness values of the direct evaporative cooler or the regenerative evaporative cooler. As either of effectiveness of the regenerative and direct evaporative coolers of desiccant cooling system increases, both the cooling capacity and COP increase, but effectiveness value of regenerative cooler gives the opposite effect on the system performance. It is found that effectiveness of regenerative cooler less than 0.7 shows the optimum cooling capacity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1590-1595
• /
• 2003

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the lead-lag controller is designed using the complex method that is one kind of constrained direct search method.

• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.585-595
• /
• 2001

A series of experiments have been carried out to investigate the effects of non-condensable gas on the direct contact film condensation of vapor mixture under an adiabatic wall condition. The average heat transfer coefficient of the direct contact condensation was obtained at the atmospheric pressure with four main parameters ; air-mass fraction, mixture velocity, film Reynolds number, and the degree of water film subcooling having an influence on the condensation heat transfer coefficient. With the analysis of 88 experiments, a correlation of the average Nusselt number for direct contact film condensation of steam/air mixture at an adiabatic vertical wall was proposed as functions of film Reynolds number, mixture Reynolds number, air mass fraction, and Jacob number. The average heat transfer coefficient for steam/air mixture condensation decreased significantly while air mass fraction increased. The average heat transfer coefficients also decreased as the Jacob number increased, and were scarcely affected by the film Reynolds number below a mixture Reynolds number of about 245,000.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.144-150
• /
• 2000

A field case study was performed to investigate optimum cropping technique of direct seeded rice. In addition, an economic analysis was made to see the effect of this method. Field study was performed at a 2.1㏊ paddy field in Kimjae city, Chonbuk province from 1991 to 1999. Various direct seeding method such as dryland seeding, wetland seeding, and no-till wetland seeding were introduced. Optimum cropping techniques such as when and how to manage the rotary till, water supply, herbicide application, and ponding depth were developed for different cropping methods. Based on this study ￦640,000 per ㏊ can be saved by direct seeding due to no nursery cost, and ￦l,220,000 per ㏊ can be saved by no-till and no nursery cost. With further study these cropping techniques including the no-till direct deeding proves to be advantageous these can be adopted for the most of the paddy fields in Korea.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.564-572
• /
• 2008

The performance of the direct adaptive time-delay command shaping filter depends on the select time-delay. In the previously introduced direct adaptive command shaping filter, however, the time-delay value is fixed and only the magnitudes of the impulses are learned. In this paper, the authors introduce a new scheme to adapt the time-delay which is to be used in conjunction with the direct adaptive command shaping for the improved vibration suppression in flexible motion system. In order to formulate the time-delay adaptation scheme, the authors have analyzed the effect of the time-delay value on the performance of the direct adaptive command shaping filter. By modifying the direct adaptation formula based on the analysis result the authors have established a set of equations to adapt the time-delay toward the optimal value. Simulation results show the effectiveness of the proposed time-delay adaptation approach for the improved vibration suppression.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1719-1726
• /
• 2004

Direct drive servovalve(DDV) is a kind of one-stage valve because the main spool valve is directly driven by the DC motor. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the lead-lag controller is designed using the complex method that is one kind of constrained direct search method.

• 경영과정보연구
• /
• 제33권3호
• /
• pp.21-33
• /
• 2014

본 연구는 최근에 해외직접투자의 결정요인으로써 간주되고 있는 투자대상국의 지적재산권 보호의 영향에 관하여 실증분석 하였다. 2000부터 2008년까지 미국의 다국적기업들을 대상으로 고정효과 모형(FEM)과 시스템 GMM을 사용하여 분석한 결과, 지적재산권 보호의 변화는 미국 다국적기업으로부터의 해외직접투자를 유입에 있어서 긍정적인 영향을 미치는 반면에, 지적재산권 보호의 정도는 유의적인 영향을 제공하지 않았다. 소득수준을 기준으로 고소득국가와 저소득국가로 나누어 실시한 추가 분석결과에서 역시 지적재산권 보호의 변화만이 저소득국가에서의 미국 다국적기업의 투자에 긍정적인 영향을 미치는 것으로 나타났다. 패널자료의 특성상 오차항의 이분산성(heteroscedasticity)을 고려하여 전체 투자대상국을 상대로 FGLS와 PCSE 분석을 실시한 결과에서도 지적재산권 보호의 변화만이 해외직접투자의 유입에 긍정적인 영향을 미치고 있음을 알 수 있으며, 동일한 방법으로 고소득국가와 저소득국가로 나누어 추가분석을 실시한 결과에서는, 저소득국가에서만 미국 다국적기업의 해외직접투자 유입에 유의적으로 긍정적인 영향을 제공하고 있음을 보여주었다. 이러한 결과는 투자대상국의 지적재산권 보호의 수준보다는 변화가 해외직접투자의 유입에 영향을 제공하는 것으로써, 특히 저소득국가가 미국 다국적 기업의 해외직접투자를 유입하기 위하여 지적재산권 보호의 변화에 대한 중요성을 시사한다.

• 대한간호학회지
• /
• 제22권4호
• /
• pp.476-490
• /
• 1992

This study was designed to develop and test a structural model for maternal adaptation and family stress in families with mentally handicapped children. A hypothetical model was constructed on the basis of the family stress theory developed by McCubbin etc. The model included 6 theoretical concepts and 11 paths. For the purpose of the model testing, empirical data were collected from May to August, 1992. The subjects of the study constituted 190 mothers of children in five special schools and one private institute in Seoul and Choong Nam. An SPSS PC＋ and PC－LISREL 7.13 computer programs were used for descriptive and covariance structure analysis. The results of the study were as follows. (1) The hypothetical model showed itself a good fit to the empirical data ［Chi - square＝18.35(df＝7, P＝0.005), Goodness of Fit Index＝0.991, Adjusted Goodness of Fit Index＝0.959, Root Mean Square Residual＝0.042), Non Normed Fit Index＝0.90, Normed Fit Index＝0.96］. (2) The results of Hypothesis testing indicated : 1) Social support(${\gamma}$$_{11}$＝.238, T＝2.352), Family functioning(${\gamma}$$_{12}$＝.729, T＝5.957) and Family life event stress(${\gamma}$$_{13}$＝.125) had direct effects on situational definition. 2) Life event stress(${\gamma}$$_{23}$＝.319, T＝3.872) had direct effects on the effect of the handicapped child on the family. Family functioning(${\gamma}$$_{22}$＝-.245) and situational definition($\beta$$_{21}$＝-.335, T＝3.227) had direct effects on the effect of the handicapped child on the family. 3) Situational definition($\beta$$_{31}$＝-.273, T＝3.493), family life event stress (${\gamma}$$_{33}$＝.124, T＝2.169) and the effect of the handicapped child on the family($\beta$$_{32}$＝.264, T＝-3.227) showed the direct effect on the maternal adaptation. The model was supported by the empirical data. Thus it was suggested that the model could be applied to family nursing care with the families with the mentally handicapped. The construction and testing of the comprehensive model seem to be the first trial in Korea.a.a.a.