• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.281-287
• /
• 2007

Purpose: This study was conducted in order to evaluate how chemiluminescent lighting($ViziLite^{(R)}$) could increase the sharpness of margin and contrast to normal mucosa in the diagnosis of oral lichen planus(OLP), the most frequent oral premalignant lesion, compared with direct visual inspection under incandescent light. Methods: 41 consecutive patients, diagnosed to have OLP with visual inspection under incandescent light, were further examined with chemiluminescent light. The degrees of margin sharpness and lesion contrast were ranked on a scale from 1 to 3 for all patients under visual inspection and chemiluminescent light. The presence of additional lesion only detected by chemiluminescent light, complication, and discomfort were checked for each patient. After both screening tests, biopsy specimens were harvested from all patients with scalpels and histopathologic assessments were done. Results: All 41 patients were diagnosed to have OLP by both visual inspection and chemiluminescent light examination. This result was definitively diagnosed by histopathology. Degrees of margin sharpness and lesion contrast were increased by chemiluminescent light compared with visual inspection, but only the difference of lesion contrast was statistically significant. In 22.0% of patients, additional lesions were detected and 88.9% of them were diagnosed to have OLP histopathologically. 17.1% of patients noted discomfort and 9.8% of patients showed complications after chemiluminescent test. Conclusion: Chemiluminescent light may not be proper for the screen test of oral cancer or premalignant lesion but showed some possibility for additional diagnostic tool for definitively diagnosed patients in determination of lesion margin and scope.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.569-575
• /
• 2007

This study was carried out to determine bioaccumulation levels of total mercury on various fish tissues in two streams (Banseok and Hasin Stream) and one lake (Yeongsan Lake) during April-May 2007. We also determined natural background levels of total mercury bioaccumulation to evaluate relative individual impacts of fish and compared the levels with reference sites as a preliminary study to evaluate heavy metal stressor using fish. For the study, we collected fishes in the sampling sites and analyzed the concentrations of total mercury in the liver, kidney, gill, vertebral column, and muscle tissues using Direct Mercury Analyzer (DMA-80, US EPA Method 7473). The levels varied depending on the types of waterbody and tissues used. Concentrations of total mercury ranged between 5.1${\mu}g$ $kg^{-1}$ and 108.6 ${\mu}g$ $kg^{-1}$ in the streams and between 5.3${\mu}g$ $kg^{-1}$ and 87.3 ${\mu}g$ $kg^{-1}$ in the reservoir, and the values were highest in the muscle tissues. Levels of natural background levels of total mercury, even though the sampling number was few, averaged 23.6 ${\mu}g$ $kg^{-1}$ in the study sites. The individual and mean values in each system was not so high in terms of US EPA criteria of fish health and human health, indicating that the impact was minor in the study site. Further studies should be done for the determination of mercury levels in the systems.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.325-354
• /
• 2004

Slabs in buildings and bridge decks, which are restrained against lateral displacements at the edges, have ultimate strengths far in excess of those predicted by analytical methods based on yield line theory. The increase in strength has been attributed to membrane action, which is due to the in-plane forces developed at the supports. The benefits of compressive membrane action are usually not taken into account in currently available design methods developed based on plastic flow theories assuming concrete to be a rigid-plastic material. By extending the existing knowledge of compressive membrane action, it is possible to design slabs in building and bridge structures economically with less than normal reinforcement. Recent research on building and bridge structures reflects the importance of membrane action in design. This paper describes the finite element modelling of membrane action in reinforced concrete slabs through optimisation of a simple concrete model. Through a series of parametric studies using the simple concrete model in the finite element simulation of eight fully clamped concrete slabs with significant membrane action, a set of fixed numerical model parameter values is identified and computational conditions established, which would guarantee reliable strength prediction of arbitrary slabs. The reliability of the identified values to simulate membrane action (for prediction purposes) is further verified by the direct simulation of 42 other slabs, which gave an average value of 0.9698 for the ratio of experimental to predicted strengths and a standard deviation of 0.117. A 'deflection factor' is also established for the slabs, relating the predicted peak deflection to experimental values, which, (for the same level of fixity at the supports), can be used for accurate displacement determination. The proposed optimised concrete model and finite element procedure can be used as a tool to simulate membrane action in slabs in building and bridge structures having variable support and loading conditions including fire. Other practical applications of the developed finite element procedure and design process are also discussed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.25-34
• /
• 2003

Recently, performance-based analysis/design methods such as the capacity spectrum method and the direct displacement-based design method were developed. In these methods, estimation of energy dissipation capacity of RC structures depends on empirical equations which are not sufficiently accurate, On the other hand, in a recent study, a simplified method for evaluating energy dissipation capacity was developed. In the present study, based on the evaluation method, a new seismic design method for flexure-dominated RC walls was developed. In determination of earthquake load, the proposed design method can address variations of energy dissipation capacity with design parameters such as dimensions and shapes of cross-sections, axial force, and reinforcement ratio and arrangement, The proposed design method was compared with the current performance-based design methods. The applicability of the proposed method was discussed.

• Journal of Veterinary Clinics
• /
• v.2 no.1
• /
• pp.105-114
• /
• 1985

The optimal conditions for the evaluation of serum ornithine carbamyltransferase activity, based on the do-termination of citrulline formed during the enzymatic reaction, were investigated and the serum ornithine carbamyltransferase activity of cattle were surveyed. Barbital-acetate buffer(70m moles/L, pH 7.0 at $37^{\circ}C$) were usea for the entire experiment. The results were as follows. 1. When the concentration of $H_2SO_4$ in color reagent exceeds 3.0 m1/100m1 the serum protein precipitated and absorbance increased. 2. The concentrations of antipyrine and diacetylmonoxime required for maximal color formation were 1g/L and 5g/L, respectively. 3. The absorbance was maximal when the reaction mixture was boiled for 25 minutes. 4. The chromogen were stable for at least 60 minutes under loon lighting condition, but decolorized rapidly under direct sunlight. 5. The minimal concentration of urease solution(Sigma Chemical Co., Type III) required for elimination of serum urea was 0, 6mg/ml. 6. When the concentration of L-ornithine solution increased up to 22m moles/L, the ornithine carbamyltransferase activity was not inhibited by zwitterion of ornithine. 7. In accordance with the increase of carbamylphosphate concentration the ornithine carbamyltransferase activity increased and the nonenzymatic citrulline production also increased slightly. 8. The standard curve of citrulline revealed linear pattern within the range of this experiment (0.1~4.0m moles/L). 9. The ornithine carbamyltransferase activities of normal cattle investigated in this laboratory were 6.85$\pm$4.38U/L (mean$\pm$SD) in cows and 2.89$\pm$2.50U/L in bulls. The range of the activities were 0.39～29.12U/L in cows and 0.06~17.34U/L in bulls.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1295-1296
• /
• 2008

Hydrogen peroxide ($H_2O_2$) biosensor is one of the most developing sensors because this kind of sensors is highly selective and responds quickly to the specific substrate. Hemoglobin (Hb) has been used as ideal biomolecules to construct hydrogen peroxide biosensors because of their high selectivity to $H_2O_2$. The direct electron transfer of Hb has widely investigated for application in the determination of $H_2O_2$ because of its simplicity, high selectivity and intrinsic sensitivity. An electrochemical detection for hydrogen peroxide was investigated based on immobilization of hemoglobin on DNA/Fe(pyterpy)$^{2+}$ modified gold electrode. The pyterpy monolayers were firstly an electron deposition onto the gold electrode surface of the quartz crystal microbalance (QCM). It is offered a template to attach negatively charged DNA. The fabrication process of the electrode was verified by quartz crystal analyzer (QCA). The experimental parameters such as pH, applied potential and amperometric response were evaluated and optimized. Under the optimized conditions, this sensor shows the linear response within the range between $3.0{\times}10^{-6}$ to $9.0{|times}10^{-4}$ M concentrations of $H_2O_2$. The detection limit was determined to be $9{\times}10^{-7}$ M (based on the S/N=3).

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5101-5104
• /
• 2012

Background: Genetic mutation is a significant factor in colon CA pathogenesis. Familial adenomatous polyposis (FAP) is an autosomal dominant hereditary disease characterized by multiple colorectal adenomatous polyps affecting a number of cases in the family. This report focuses on a family with attenuated familial adenomatous polyposis (AFAP) with exon 4 mutation, c.481C>T p.Q161X of the APC gene. Methods: We analyzed 20 members of a family with AFAP. Clinical and endoscopic data were collected for phenotype determination. Genetic analysis was also performed by direct sequencing of the APC gene. Result: Five patients with a phenotype of AFAP were found. Endoscopic polyposis was demonstrated among the second generation with genotype mutation of the disease (age > 50 years) consistent with delayed phenotypic adenomatous polyposis in AFAP. APC gene mutation was identified in exon 4 of the APC gene, with mutation points of c.481C>T p.Q161X. Laparoscopic subtotal colectomy was performed to prevent carcinogenesis. Conclusion: A family with attenuated familial adenomatous polyposis of APC related to exon 4 mutation, c.481C>T p.Q161X, was reported and the phenotypic finding was confirmed by endoscopic examination. Genetic mutation analysis might be advantageous in AFAP for long term colon cancer prevention and management due to subtle or asymptomatic phenotype presentation in early adulthood.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.1
• /
• pp.83-92
• /
• 2009

Individual immunochromatographic assays (ICG) for ochratoxin A (OTA) and zearalenone (ZEA) were optimized and used in the development of a one-step simultaneous immunochromatographic assay (OS-ICG) for the rapid multianalysis of two mycotoxins in corn samples. The nitrocellulose membrane of the OS-ICG was treated with OTA-bovine serum albumin (BSA), ZEA-ovalbumin (OVA), and anti-mouse IgG in the OTA test, ZEA test, and control zones, respectively. Monoclonal antibody-gold conjugates (OTA3 MAb-gold and ZEA2C5 MAb-gold) were sprayed onto the conjugate pad. The visual detection limits were 2.5 and 5 ng/ml for OTA and ZEA, respectively, and the results were obtained within 15 min after starting the analysis. An efficient, simple, and rapid extraction method using 30% MeOH/PBS was established and validated by analyzing the corn samples spiked with OTA/ZEA mixtures (0/0, 5/10, 10/20, and $20/30\;{\mu}g/kg$). The cut-off values of the OS-ICG for the spiked corn were 5 and $10\;{\mu}g/kg$ for OTA and ZEA, respectively. Natural corn samples were analyzed by OS-ICG, direct competitive enzyme-linked immunosorbent assay (DC-ELISA), and HPLC. Results of the OS-ICG were in good agreement with those obtained by DC-ELISA and HPLC. The developed OS-ICG offers a rapid, easy-to-use, and portable analytical system and can be used as a convenient qualitative tool for the on-site simultaneous determination of OTA and ZEA in cereals, food, and agricultural products in one analytical cycle.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.3_4
• /
• pp.29-36
• /
• 1990

Aflatoxins, produced by strains of Aspergillus flavus and Aspergillus parasiticus, can be found worldwide in corn, barley, peanuts, and other commodities. Among this group of toxins, aflatoxin B$_1$was realized to be one of the most potent environmental carcinogens, mutagens and teratogens. It is routinely monitored by methods such as thin layer chromatography, liquid chromatography, fluorodensitometric technique and radioimmunoassay. However, these assays are expensive, necessitate radioactive reagents, and require overnight incubation. In this study, the determination of fungal flora in several sorts cereals has been carried out in order to obtain an appropriate information of the population of fungi. The quantitative analysis of aflatoxin B$_1$has been carried out by High Performance Liquid Chromatography (HPLC) method and Enzyme Linked Immunosorbent Assay (ELISA). The results were summarized as follow: 1) From the 100 samples,313 colonies of fungi were isolated. Among the 313 colonies, 274 were possible to identify into 11 genera. The identified genera were Aspergillus Penicillium, Mucor, Rhizopus, Alternaria, Cladosorium, Fusarium, Circinella, Chrysosporium, Paecilomyces and Phoma. 2) Six of Aspergillus flavus were aflatoxin-producing strains. Aspergillus flavus isolated from sample barleys was contained the highest content (21.8 $\mu\textrm{g}$/ml) of aflatoxin B$_1$. 3) The yield of aflatoxin B$_1$-oxime compound was appromately 75%. Aflatoxin B$_1$-oxime-Human serum albumin was approved by formal consent as complete antigen. 4) Direct competitive ELISA permitted detection of 0.15 ng levels. In the quantitative microanalysis, ELISA was superior to HPLC method.