• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.777-783
• /
• 2006

The coarse grained materials are used in various construction field such as express way back fill, Dam etc. Especially, for dam construction, a huge mount of rock fill materials are needed, so around domestic stony mountains are generally developed to produce materials. Not an accurate theory, but design criteria is based on empirical factors that were constructed in advance for design of dam especially Concrete Face Rockfill Dam(CFRD). Considering the post facts, the modified design criteria are essential in the future with more theoretical and experimental ways. In this study, large scale direct shear tests are performed with various relative density conditions on coarse grained material of Yecheon area to compare test results and general CFRD design factors.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.493-513
• /
• 2013

Direct displacement-based design (DDBD) represents an innovative philosophy for seismic design of structures. When structural considerations are more critical, DDBD design should be carried on the basis of limiting material strains since structural damage is always strain related. In this case, the outcome of DDBD is strongly influenced by the displacement demand of the structural element for the target limit strains. Experimental studies have shown that anchorage slip may contribute significantly to the total displacement capacity of R/C column elements. However, in the previous studies, anchorage slip effect is either ignored or lumped into flexural deformations by applying the equivalent strain penetration length. In the light of the above, an attempt is made in this paper to include explicitly anchorage slip effect in DDBD of R/C column elements. For this purpose, a new computer program named RCCOLA-DBD is developed for the DDBD of single R/C elements for limiting material strains. By applying this program, more than 300 parametric designs are conducted to investigate the influence of anchorage slip effect as well as of numerous other parameters on the seismic design of R/C members according to this methodology.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.238-238
• /
• 2012

Report is devoted to place and role of numerical simulation in design of rocket propulsion systems. In introduction advanced solutions in liquid propellant rocket engines design are presented. Further essence of design process described briefly. The central place of method of solution of direct problem in design process was shown. Numerical simulation for solving direct problem of fluid dynamic was used as the alternative to theoretical and experimental approaches. Main features of numerical models of processes in propulsion systems were observed. Some results of simulation and (or) design of different types of chemical propulsion system were presented also. The combined rocket engine, rocket engine with injection of after-turbine gas into supersonic part of the nozzle, solid propellant engine and hybrid propulsion engine are under consideration.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.421-426
• /
• 2005

Scattering center extraction schemes for radar cross section reduction of large complex targets, like warships, was developed, which are an 1-D radar image method(range profile), and a direct analysis based on an object precision method. The analysis result of partial dihedral model shows that the presented direct analysis method is more efficient than the 1-D radar image method for scattering center extraction of interested targets, in terms of radar cross section reduction design, not signal processing. In order to verify the accuracy of the direct analysis method, a scattering center analysis of an naval weapon system was carried out, and the result was coincident with that of another well-known RCS analysis program. Finally, an analysis result of RCS and its scattering center of an 120m class warship-like model presented that the direct analysis method can be an efficient and powerful tools for radar cross section reduction of large complex targets.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.112-119
• /
• 2009

An automatic transmission of construction equipment is controlled by hydraulic and electronic system for doing in various functions like as shifting and operation. The shifting is operated by the engaged and disengaged clutch motion from hydraulic power. On the shifting process, suitable pressure control to the clutch is required for smooth shifting. Hydraulic control system in the automatic transmission is divided by the pilot control type and the direct control type greatly. The direct control type has an advantage than the pilot control type. Because the structure is simple, the design and the manufacture are having less troubles and the system can be maximized precision pressure control. However, the excellent performance proportional control valve should be used to achieve proper control-ability. In this study, the dynamic analysis model composing the automatic transmission and hydraulic system for forklift truck is presented to simulate the characteristics of hydraulic system about the direct control type. That model is verified the validity compared the results of the testing examination. Parameters of input signal are analyzed to reduce the output torque according to input control signal is affected in shifting characteristic.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.16-19
• /
• 2008

In this study, it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26 mm of the distance of two lamps, 4.5 mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5 % in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.121-129
• /
• 2016

The advantages of the common rail fuel injection system architecture have been recognized since the development of the diesel engine. In common rail systems, a high-pressure pump stores a reservoir of fuel at high pressure up to and above 2000 bar. And solenoid or piezoelectric valves make possible fine electronic control over the fuel injection time and quantity, and the higher pressure that the common rail technology makes available provides better fuel atomization. In this study, the direct needle-driven piezo injector was investigated for accomplishing injection pressure of 1800 bar by optimal design by simplification of component and changing number of springs and plates of DPI. It was found that a direct needle-driven piezo injection system features the prototype DPI for passenger vehicle to operate at 1800 bar of injection pressure.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 가을 학술발표대회 논문집 디자인 학 연구
• /
• pp.56-57
• /
• 1998

• 동아시아경상학회지
• /
• 제8권3호
• /
• pp.43-56
• /
• 2020

Purpose - This study was carried out to analyze the influential factors of how consumers methodize purchasing agricultural products via direct market. It further utilizes the Discrete Choice Model to analyze consumer decision specifically with regards to individual markets and store attributes. Research design and methodology - This study will use the multinomial logit model to interpret the influential factors behind selecting a specific market to purchase from. This study establishes 'online direct-purchase' as the base category with 'direct farm markets', 'local foods direct markets', 'produce boxes (CSA)' as substitutes. Results - Firstly, the variety of products, price and freshness had a positive influence on choosing 'direct farm markets' while convenience of payment and transportation had a negative influence. Second, freshness and store attributes had a positive influence on choosing 'local foods direct markets' but product price and packaging, location accessibility had a negative influence. And although product creditability had a positive influence on purchasing 'produce boxes (CSA)', product price had a negative influence. Conclusions - Accordingly, there is a need for the South Korean government to encourage the adoption of mobile payment through smartphone applications in direct farm markets to vitalize direct agricultural purchasing. However, this does need to be approached cautiously as price has a conflicting affect for each method of purchase.

• 산경연구논집
• /
• 제10권11호
• /
• pp.15-23
• /
• 2019

Purpose: Global economic integration has provided good opportunities and conditions for the development of foreign direct investment in Finances. Therefore, this paper attempts to explore what determines foreign direct investment in Finances of Organization for Economic Co-operation and Development (OECD) countries. Research design, data and methodology: This paper employs the panel data over the period 2005-2017 and uses the random effect model to estimate this proposition. Results: The results indicate that the foreign direct investment in services, growth rate of GDP, interest rate and saving are positively related with foreign direct investment in finances. Conversely, the growth rate of wage and fluctuation rate of exchange rate are negatively related with foreign direct investment in finances. Moreover, the results verify that the effect of these variables on foreign direct investment in finances is different before and after 2008 (global economic crisis). In addition, the results also manifest that the regional effect exists. Namely, the effect of these variables on foreign direct investment in finances between G7 countries and G20 countries exist significant difference. Conclusions: Those variables used in this paper are related with foreign direct investment in Finances of (OECD) countries.