• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.441-456
• /
• 1995

This study was done to determine direct and in-direct nursing time in nursing units in hospital to ap-plied computer system and expect that those results contribute to measure efficiency of nursing practice and planning of nursing manpower. The design for study was a descriptive study. The study results are as follows. 1. Patients admitted to the Internal Medicine and General Surgery units were grouped into four. Group Ⅰ, 32.9% of the total patients, consisted patients whose condition was considered minor Group Ⅱ, 26.1%, was of those whose condition was considered moderate, Group Ⅲ, 41. 8%, moderate severe and Group Ⅳ, 29.2% the most severe. 2. Nursing intervention times by care type were as follows four minutes spent for suction eight minutes, for simple position change, ten minutes, for sheet change, seven minutes for a hot or cool compress, six minutes for dressing change, four minutes for Ⅰ.M. injection, six minutes for patient health education and five minutes for body temperature check. 3. Direct care time by patient group revealed the following : Group Ⅰ rquired 191.4 minutes, Group Ⅱ required 331.1 minutes, Group Ⅲ rquired 499.4 minutes, and Group Ⅳ rquired 1328.0 minutes. 4. The ratio of time for adequate nursing care and direct care time in the Internal Medicine and Goneral Surgery units was 67.4%-83.4% and 94.7%-99.3% in the Intensie Care Unit. 5. Average daily direct care time per patient was 5.5 hours in the Internal Medicine unit and 11.5 hours in the Intensive Care Unit. 6. Time spent in indirect care was 48.3 minutes for computer recording,34.8 minutes for giving and receiving patient information for shift duty, 28.0 minutes for eating and resting time, 26.6 minutes for transfering and identifying patients, 25.6 minutes for identifying Doctor's order, 23.9 minutes for recording vital signs. 7. Time spent in indirect care was 282.2 minutes by head nurses (charge nurses), 258.7 minutes by nurses and 261.6 minutes by nurse aids. 8. The average nurse's workload was 9.3 hours and daily indirect nursing time required 46.3%-50. 5% of above mentioned workload time. .9. The average daily indirect care time per patient was expected to be 57.7 minutes in the Internal Medicine unit and 3.3 hours in the Intensive Care Unit.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.471-478
• /
• 2011

For a practical simplicity in designing of reinforced concrete structures, the indirect crack controlling method of limiting bar spacing is adopted in KCI structural design provisions. In addition, a direct method for evaluating crack width is also provided in the appendix of the code. But there may be some mismatched results between these two crack controlling methods. In this study, limit values of maximum bar spacing calculated from KCI provisions, KCI appendix, and Frosch's equation are examined as concrete strength, cross-section height, and concrete cover are varied, and the differences are analyzed. From the results, it becomes clear that the differences between maximum bar spacing calculated from KCI code text provisions and those from KCI code appendix provisions are too significant to be neglected. Therefore, rational crack models are suggested in order to get rid of the discrepancy between the direct and indirect control methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.86-91
• /
• 2009

Indirect Touch switch which detects the change of capacitance around the electrode of QT113H chip from QPROX is designed and assembled. Sensitivity analysis of dielectric materials which prevents electrodes from direct touch is performed and the results are displayed in tables and graphs. Glass, acryl, and MDF is used to insulate the electrode and to measure the operating sensitivity of indirect touch switch. While the difference of permittivity of the dielectric materials are large, it is confirmed that the operating sensitivity of each dielectric materials are not so large as the differences of those of dielectric materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.370-378
• /
• 2021

Purpose. The purpose of this study was to evaluate the currently published literatures investigating the accuracy of computer-aided design and computer-aided manufacturing removable partial denture (CAD-CAM RPD) framework with different manufacturing techniques and methods. Materials and methods. A comprehensive search for literatures was conducted in PubMed database using specific keywords with the patient, intervention, comparison, and outcome (PICO) question, "Is there a difference in accuracy of RPD frameworks manufactured using digital workflow according to the manufacturing process and methods?" Results. A total of 7 articles were selected. Two studies compared intraoral scanning and laboratory scanning for RPD frameworks and had heterogenous results. In the studies using different manufacturing process, RPD frameworks had clinically acceptable accuracy in both subtractive and additive manufacturing. Polyetheretherketone (PEEK)-milled RPD frameworks showed higher fit accuracy than traditionally casted or 3D printed RPDs. Direct milling method showed a higher accuracy than indirect milling method. However, in rapid prototyping, indirect method showed higher accuracy than direct method. Conclusion. The RPD frameworks fabricated using CAD-CAM technology showed a clinically acceptable level of accuracy regardless of manufacturing process or techniques. Consistent results have not been reported regarding the digital impression methods, which were intra oral scanning or laboratory scanning, and further studies are needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1333-1345
• /
• 2011

This study establishes public self-consciousness, sociocultural attitudes toward appearance, and objectified body consciousness as causal variables to identify their direct or indirect effects. This study is an aggregate analysis of existing studies that reveals the relations of how these factors turn to be the image management behaviors. A survey was conducted on 962 women from the ages of 20 to 59 who live in the Daegu and Gyeongbuk areas. The data analysis was performed through programs such as AMOS 16.0 and SPSS 18.0 for Windows. The findings are as follows: first, public self-consciousness had a direct effect on the sociocultural attitudes toward appearance and on objectified body consciousness, whereas it affected image management behaviors directly or indirectly. This means that as women become aware of others' attention, they recognize the social importance of appearance, internalize ideal social standards, and observe and evaluate their own bodies from a third person's viewpoint regarding the standards for a body required by society; in addition, these procedures lead them to manage their image behaviors. Second, the sociocultural attitudes toward appearance had a direct influence on objectified body consciousness; however, they had an indirect effect on image management behaviors. This demonstrates that body consciousness plays a role as a mediator between the sociocultural attitudes toward appearance and the image management behaviors. Third, it appeared that objectified body consciousness directly affected image management behaviors. Objectified body consciousness was identified as a causal variable that exerts immediate influence on image management behaviors where the more objectified body consciousness women objectified themselves as the body standards that created further image management behaviors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.14 no.1
• /
• pp.66-71
• /
• 1976

The purpose of this investigation was to evaluate the mouth preparation and design of removable partial dentures. A total of 187cases for the prefabricated partial denture frameworks in both maxillary and mandibular semi-dentulous situations (66 cases and 203 cases) was selected from this study. The evaluations of mouth preparation and design observed here involved the classification of edentulous spaces, status of abutment splinting with location, design of direct retainer and structure of maxillary major connector according to the incidence of both dental arches, ages, sexes and segment of semidentulousness. The analyzed results were as follows: 1) The order of frequency rate in removable partial denture construction was Class II (50.27%), Class I (36. 90%), Class III (10.69%), and Class IV (2.14 %). 2) The distribution on design of maxillary removable partial denture prosthesis was 33.22% and 64.11% in mandibular removable partial denture prosthesis. 3) The age distribution of removable partial denture prosthesis was prominent after40 years (41.71%). 4) The design pattern of maxillary major connectors was in order of anteroposterior bar, single palatal bar, palatal strap, U-shape connector. 5) The design pattern of direct retainer was in order of Aker's clasp, I-bar clasp, backaction clasp, cuspid universal clasp. 6) The abutment for partial denture clasp splinted between premolar and premolar and its frequency rate revealed 53.44%. 7) It seemed that the location and design of the indirect retainer showed accepatble limit.

• Journal of the Korean Society of Costume
• /
• v.66 no.1
• /
• pp.90-107
• /
• 2016

The purpose of this study was to examine the fashion brand attitude of tweenagers, with a focus on brand awareness, image, identification and loyalty. The study analysed 541 fifth and sixth-grade students in Seoul elementary schools. Major statistical methods used for this study were Cronbach's alpha analysis, confirmatory factor analysis, and path analysis with SPSS 19.0 and AMOS 19.0. Brands selected for this study were "NIKE" and "BEANPOLE KIDS". The result of this study was as follows: First, the study showed that both "NIKE" and "BEANPOLE KIDS" had 4 significant routes from the research model. Brand awareness had influence on brand image; brand image had influence on brand identification and brand loyalty; and brand identification had influence on brand loyalty. Second, using the bootstrapping to verify the significance of the total effect and indirect effect, brand awareness had a significant indirect effect on brand identification and brand loyalty; brand awareness did not have any direct effect on brand identification and brand loyalty for both "NIKE" and "BEANPOLE KIDS". Also, the total effect of brand awareness on brand identification and brand loyalty was significant. The result of this study showed the development potential to the fashion companies targeting tweenagers.

• Solar Energy
• /
• v.20 no.3
• /
• pp.51-60
• /
• 2000

This paper deals with the design, construction and operation of a direct solar hot water heating system developed to harness the solar energy more effectively. The system introduced here uses a unique network of riser tubes and header pipes apart from the existing concept to exploit the physical properties of water which expands when it freezes. It also employs a special pressure relief mechanism for the header to prevent its breakage due to freezing. A number of tests are made to assure its functional reliability during frigid weather conditions and its superior performance over indirect systems.

• Korean Institute of Interior Design Journal
• /
• v.25 no.3
• /
• pp.21-30
• /
• 2016

For the elderly with declining sensory due to aging, various sense stimulation factors provided in indoor environment is desirable healing environment. This study aims to propose the direction of sensory healing environment by adapting the richness of natural environment in indoor place based on the biophilic design theory with implementation method of sensory richness environment. The healing environment was limited to the ward in the beginning, but it has widened its range to the whole place, and the lobby is considered quiet important to healing. Therefore, this study selected lobby space of geriatric hospital as study subject. As for the study method, we deducted the analytic matrix focusing on the property and elements of the direct and indirect experience of nature appearing in the biophilic design theory, and analyzed the field investigation of subject space. Also, this study paid attention to point where the hotel lobby leads the change of emotional environment, and conducted analysis and comparison by deciding this is what the hotel and geriatric hospital should direct to. As the result, the biophilic design factor of hotel is actively expressed by complex direction of various factors, but as for the geriatric hospital, it was rather passive and simple in expression. The adaptation ratio between hotel and geriatric hospital was almost more than twice times difference in average.

• Journal of Distribution Science
• /
• v.17 no.9
• /
• pp.35-45
• /
• 2019

Purpose - This study analyzes the relationship between inter-function coordination variables, competitor, customer and innovation orientation that has been developed by Narver & Slater (1990), also known as Market Orientation Strategy on SME Sutera's marketing performance, through direct and indirect effect relationships. Research design, data, and methodology - This study uses a sample of 168 respondents who are silk SME entrepreneurs in eleven Silk Craftsman sub-districts in Wajo Regency - South Sulawesi Province, Indonesia. Data collection using a questionnaire with a period between January - June 2019. Data analysis use PLS. The stages of testing the results of analysis go through several stages: the first stage, analysis of variable descriptions, the goodness of fit model (AVE, CR, Cronbach Alpha, R²) and hypothesis test. Results and Findings - From the fifteen hypothesis by direct and indirect effect state six hypothesis are rejected and eleven hypothesis are accepted. Overall, the concepts of Resource Based View theory (RBV) and Structure-Conduct- Performance theory (SCP) also provide a strategic picture for businessmen related to product innovation and service innovation and the urgency of regeneration in order to maintain the continuity of superior products in the future.