• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.3
• /
• pp.366-378
• /
• 2001

Objective: The purpose of this study was to identify differences in measurement methods for blood pressure (Direct measurement, HP automatic indirect measurement, and SE 7000 Korean made indirect measurement), and to evaluate the clinical trial of the Korean made automatic indirect blood pressure measurement. Material & Methods: From June, 1999 to February, 2000, fifty five consecutive patients were randomized into hypertension group (n=20), normotension group (n=20), and hypotension group (n= 15). Measuring blood pressure by indirect methods (HP NIBP M 1008B and SE 7000 NIBP Korean made) was done simultaneously in the same arm with arterial line for direct blood pressure measurement (HP M1006A). The procedures were repeated ten times at intervals of 2 minutes. Statistical analysis was Performed using SPSS (version 8.0 for windows) software package. Values were expressed as means and standard deviation and means were compared using t-test. Statistical significance was considered present with a p value less than 0.05. Results: In the hypertension group and noromotension group, the disparity between HP direct measurement and indirect SE 7000 NIBP did not show any differences compared to the disparity between HP direct measurement and indirect HP NIBP. In the hypotension group, the disparity in the diastolic pressure between HP direct measurement and indirect SE 7000 NIBP was significantly different compared to the disparity between HP direct measurement and indirect HP NIBP (p<0.001), however, disparities in systolic pressure did not showed any differences. Conclusion: Direct blood pressure measurement (HP M1006A) can be replaced with indirect blood pressure measurements (HP NIBP M 1008B & SE 7000 NIBP) in normotension and hypertension patients. Korean made indirect measurement was found to be more accurate compared to HP indirect measurement in hypotension Patients, but more study is needed.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.129-137
• /
• 2019

Tax can be categorised into direct tax and indirect tax. This paper uses the ordinary least-squares regression method to study the impact of direct and indirect tax on economic growth in Vietnam in the period 2003-2017. Statistical data is collected from the Ministry of Finance of Vietnam. Theoretically, tax generates the state budget revenue and is a tool to regulate the economy. The results of statistical tests show that tax has a positive impact on Vietnam's economic growth. However, the effects of direct tax and indirect tax are different. The indirect tax has a positive influence and promote Vietnam's economic growth, while the impact of the direct tax is invisible. There has not been sufficient evidence to confirm that the indirect tax has a more positive impact than the direct tax. To promote economic growth, Vietnam needs to restructure its tax system towards: (1) Increasing the proportion of indirect tax, reducing the proportion of direct tax in the state budget revenue; (2) Expanding tax bases; (3) Reducing tax rates of corporate income tax and personal income tax; (4) Increasing tax rates of environmental protection tax, natural resources tax, value added tax and excise tax on some types of goods which harm health and environment.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.562-568
• /
• 2020

This study investigates the relationship between ultrasonic velocity and density in the direct method, the effect of distance between transducers in the indirect method, and the difference between the direct and indirect methods with transducers placed at a distance of 200 mm in nondestructive ultrasonic testing of spruce lumber. The direct method using 54 kHz ultrasonic transducers was applied to two planes, namely, radial section (LR) and tangential section (LT) of samples. The indirect method measurements were taken using the same transducers. Two velocities were measured at the top and bottom of the LT plane and at the two sides of the LR plane; the two values for each plane were averaged. The relationship between density and ultrasound velocity in the direct method demonstrated a positive correlation between the two variables. The difference between the two planes, LT and LR, was not statistically significant. Moreover, the distance between the transducers in the indirect method affected ultrasound velocity, with the ultrasonic velocity increasing as the distance between the transducers became larger. A transducer distance of 200 mm yielded a close approximation of the direct method results with a ratio of 0.87. Finally, no statistical evidence of a difference between the two planes in the indirect method was found. If the direct method, which requires access to two surfaces, is impractical, the indirect method can be applied.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.55-64
• /
• 2010

This study tried to focus on nontraditional job that has not been studied in terms of the subjects associated with MSDs(Musculoskeletal Disorders). Specifically, dental procedure was the job to be analyzed in this study. An alternative method as well as a traditional method for viewing teeth while performing simulated dental procedures. Four graduated students did both methods(direct view and indirect view) as the subjects in this study. The method based on indirect view used a video camera and monitor to view the teeth. The experiment was conducted five times for each subject. The major findings in this study were as follows; 1) Job speed was increased with the repetitions for both methods, 2) Difference of Neck flexion between direct and indirect methods was statistically siginificant(Neck flexion for indirect method was dramatically decreased), 3) Difference of job speed between direct and indirect methods was statistically significant(Job speed for direct method was faster than that of indirect method), 4) Difference of error rate between direct and indirect methods was statistically significant(error rate for direct method was lower than that of indirect method), 5) Even though indirect method did not provide better performance in terms of job speed and error rate yet, it seemed to need a trade-off between two methods in the future since indirect method provided better working postures than that of direct method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.48-58
• /
• 1995

This study was performed to find out the exposure level of mixed organic solvents, excretion of urinary hippuricacid and subjective symptoms according to the exposure of organic solvents of female workers who works on 5 shoes manufacturing industries in Taejon City from 24, september to 20, october 1993. The studied groups were divided into 3 groups that were consist of direct exposure group(48 workers), indirect exposure group(49 workers) and non-exposure group(68 workers) to the organic solvents. The exposure levels of toluene of direct exposure group which $89.86{\pm}56.20ppm$ had higher than that of indirect exposure group which had $40.23{\pm}47.21ppm$. In the exposure level of mixed organic solvent(R-value), direct exposure group was $2.84{\pm}1.53$ and exceeded approximatly 3 times the R-value. Whereas, indirect exposure group was not exceeded the R-value as $0.80{\pm}0.61$. In the excretion level of urinary hippuric acid, direct exposure group was $1.78{\pm}1.25g/l$, indirect exposure group was $1.22{\pm}0.93g/l$ and non-exposure group was $0.51{\pm}0.18g/l$ respectively. Therefore both direct exposure group and indirect exposure group were significantly higher than non-exposure group(P<0.01). In the correlation between toluene levels and urinary hippuric acid level, the direct exposure group had positive correlation(R=0.8309, P<0.01), also indirect exposure group had positive correlation(R=0.5859, P<0.05) and also in the correlation between the R value of mixed organic solvents and the urinary hippuric acid levels, the direct exposure group had positive correlation(R=0.4492, P<0.05), and indirect exposure group had ositive correlation(R=0.7911, P<0.01). In the complain rates of the worker's subjective symptoms at work, both direct exposure group and indirect exposure group were higher than non-exposure group(P<0.05, P<0.01). But the sujective symptoms of "floating sensation" of direct exposure group had significantly higher than indirect exposure group. In the percent of subjective symptoms complaints during the worker's daily life, both direct exposure group and indirect exposure group had generally more statistical significance than nonexposure group(P<0.01), direct exposure group had not statistical significant difference from indirect exposure group. As the results mentioned above, it has been analysed that the indirect at the adjacent manufaturing process are exposed to the considerable amount of solvent. Therefore, I think that there should be the betterment of surrounding through the complete working environment management to the occurrence source of the organic solvent, the changes of health management system to the indirect-exposed workers, and the systematic management of the special medical examination and the like.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.63-68
• /
• 2001

In this study the main elements which can be commonly adopted to every kind of business are selected through the research, case-study, benchmarking common items of a direct or indirect loss cost. As a result of the development of a program for evaluating loss cost a case or accumulated data can be easily managed through estimating the direct and indirect loss cost as tell as the ratio between directs and indirect cost. The program is fit to case-study and we are compared direct cost with indirect cost. Automatically, this program showed ratio between directs and indirect cost for style, scale of accident The person in charge of safety and hygiene can have better chances to get into management also the owner or the CEO can recognize the importance of management of safety and hygiene. So this can guide the company to invest in a prevention of disaster and to adopt a safety and hygiene management promote the prevention activity of a company, and finally decrease the accident rate in the country.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.321-332
• /
• 1998

The purpose of this study is to provide basic data for more functional and more fitting clothing construction. The subjects were college women aged from 18 to 25 in June, 1997. Data were collected by anthropometry and photometry and analyzed by the characteristic of the upper body- The results are as follows: 1. After analyzing direct anthropometric data, 1 have analyzed the data by the characteristic in each somatotype, classified them and I have had 5 groups. Group 1 with middle height and standard type, group 2 with great height and standard type, group 3 with low height and slim type, group 4 with middle height and fat type, and group 5 with low height and a little fat type. 2. After analyzing indirect photometric data, 1 have analyzed them by the characteristic and I have had 4 groups. Group 1 with lean back type, group 2 with sway back type, group 3 with straight type and group 4 with bend forward type. 3. Through the mutual corresponding relation in the 5 groups classified with direct anthropometric measurement and the 4 groups classified with indirect photometric mea- surement, direct-group 1 comes the most corresponding to indirect-group 2, comes second to indirect-group 4, and comes third to indirect-group 1. Direct-group 2 comes the most corresponding to indirect-group 4, direct-group 3 comes the most corresponding to indirect- group 1, direct-group 4 comes the most corresponding to indirect-group 3, and direct-group 5 comes the most corresponding to indirect-group 1.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.247-253
• /
• 2013

The purpose is a comparative evaluation in the DR System according to the dosimetry and image quality of the quantitative and objective via Direct digital radiography, Indirect digital radiography, Image intensifier (Charge Coupled Device type) digital radiography. The experimental method used rando phantom and measured the entrance surface dose. And through using the measured entrance surface dose and then using the PCXMC program were evaluated risk due to irradiation and the effective dose. SNR and NPS and CNR were measured and analyzed by using 21cm acryl phantom. Significance of measured value was evaluated by statistics method. Entrance surface dose, major organ dose, effective dose all of them were measured the lowest rated in direct DR when it is on the basis of direct DR dose, high-dose ratio were measured in I.I DR approximately 1.3 times, indirect DR approximately 2.4 times. Risk in accordance with radiation also was measured same as dose ratio. On the conclusion that SNR measurement result based on direct DR SNR measurements, low-SNR ratio were measured in I.I DR approximately 7.25 times, indirect DR approximately 1.48 times. On the conclusion that CNR measurement result based on direct DR CNR measurements, high-dose ratio were measured in I.I type DR approximately 1.16 tims and low-dose ratio were measured in indirect DR approximately 0.87 times. Therefore Direct DR system using a-selenium sensing element to detect x-ray photon is thought effectively at the examination such as infant to sensitive irradiation and the genital gland. Because quality image is built by low dose. Also when it is necessary that image test requiring many diagnosis information, indirect DR system is thought effectively.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.61-82
• /
• 1999

This study was conducted in order to determine health effects of socio-psychological stresses in Taegu Area from march 1 thorough march 31, 1998. Three hundred and thirty three subjects(168 males and 165 females) were randomly selected and interviewed by trained interviewers according to questionnaires. The results are summarized as fellows; 1. Health statuses by age, education religion, marital status, occupation and family income were significantly different. 2. The factors which had significant influences on Health status ware vitality, depression and general feeling of subjects' health. 3. Health status were directly influenced by the age(direct effect=-0.014), vitality(direct effect=0.473), and general feeling of subjects' health (direct effect=0.222), but, was indirectly influenced by education degree (indirect effect=0.010), income(indirect effect=0.039), and mental depression(indirect effect=-0.069). The variabilities which were both directly and indirectly influenced, were the age (direct effect=-0.014, indirect effect=-0.002), vitality(direct effect=0.473, indirect effect=-0.071).