• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.190-204
• /
• 2008

Recently, it has been strongly required to establish a systematic and sustainable performance investigation and evaluation framework on governmental funding projects for IT small and medium-sized enterprises. In this paper, Data Envelopment Analysis (DEA) models are adopted for performance evaluation on governmental funding projects for IT small and medium-sized enterprises. A new data structure is proposed for the DEA performance evaluation. Generally, in using DEA models, DEA multipliers restriction is critical to achieve the reliability of DEA optimal solutions. Based on the outputs and inputs considered in this study, Acceptance Region (AR) constraints are generated and incorporated into the DEA models so as to improve the reliability of DEA efficiency scores. Associated with AR Type I (AR-I), AR Global Model (ARGM) constraints, DEA/ (AR-I, ARGM) models are designed and then sensitivity analysis follows investigating the robustness of DEA efficiency scores relating to AR constraints adjustment. Finally, a performance evaluation is illustrated regarding governmental direct funding projects from Ministry of Information and Communication (MIC) in Korea where each project unit (i.e. Decision Making Unit (DMU)) is determined whether it is efficient or not. By using DEA/(AR-I, ARGM) models designed in this paper, robustly efficient DMUs are gradually identified according to the successive AR constraints adjustment. Among 25 DMUs, results show that 6 DMUs such as B, E, G, Q, S, Y are determined as robustly efficient against AR constraints intermediate adjustment.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.218-228
• /
• 2000

Background : Among 'structure', 'process' and 'outcome' approaches, outcome evaluation is considered as the most direct and best approach to assess the quality of health care providers. Risk-adjustment is an essential method to compare outcome across providers. This study has aims to judge performance of hospitals by severity adjusted mortality rates of coronary artery bypass graft (CABG) surgery. Methods : Medical records of 584 patients who got the CABG surgery in 6 general hospitals during 1996 and 1997 were reviewed by trained nurses. The MedisGroups was used to quantify severity of patients. The predictive probability of death was calculated for each patient in the sample from a multivariate logistic regression model including the severity score, age and sex. For evaluation of hospital performance, we calculated ratio of observed number to expected number of deaths and z score [(observed number of deaths - expected number of deaths)/square root of the variance in the number of deaths], and compared observed mortality rate with confidence interval of adjusted mortality rate for each hospital. Results : The overall in-hospital mortality was 7.0%, ranged from 2.7% to 15.7% by hospital. After severity adjustment the mortality by hospital was from 2.7% to 10.7%. One hospital with poor performance was distinctly divided from others with good performance. Conclusion : In conclusion, severity-adjusted mortality rate of CABG surgery might be applied as an indicator for hospital performance evaluation in Korea. But more pilot studies and improvement of methodologies has to be done to use it as quality indicator.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.133-142
• /
• 2009

This research is performed to estimate quality of trial pavement for construction and analyze effect of fatigue life by using the pay factor. Specially, asphalt content which is difficult to control the pavement quality, is selected by pay adjustment standard factors and pay factor is calculated by asphalt content. This research is also analyzed to present relation of fatigue life according to asphalt content, to evaluate quality of the road pavement by calculating pay factor of sampling trial field mixture 2 times. This research confirms that it is different quality of road pavement according to pay factor changes. To analyze the fatigue life of pavement by using asphalt mixture for trial field. As a result, it is conformed that high pay factor could be high fatigue life of trial field. This means that pay factor using probability theory reflects road pavement fatigue life. Also, this study is included that beam fatigue test manufacturing specimen such as mixing type of plant which purvey asphalt mixture to trial field, compared with fatigue life of trial field. As a result, the fatigue life of specimen that is manufactured by mix type is higher than trial field specimen. This means that performance of road pavement can be reduced by gradation or other effects. Therefore, to exactly evaluate the quality of road pavement, pay factor should be calculated appling various pay adjustment standard factors such as gradation, air-void in U.S. states which is adopted pay adjustment.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.2
• /
• pp.105-112
• /
• 2012

Objectives: Cigarette smoking is a modifiable risk factor for cardiovascular disease. Bilirubin is a potent antioxidant and its concentration decreases in smokers. However, studies about the association between cigarette smoking and bilirubin are scarce and most are limited to total bilirubin. Additionally, bilirubin is highly related to hemoglobin. Therefore, this study evaluates the association between bilirubin subtypes and cigarette smoking in healthy Korean men independently of hemoglobin. Methods: This study included 48 040 Korean men aged 30 to 87 years who visited the Korea Medical Institute for routine health examinations from January to December, 2007. The association of smoking with total, direct, and indirect bilirubin was assessed by logistic regression analysis taking into consideration differences in subjects and smoking characteristics. Results: Current smokers had lower bilirubin concentrations than never-smokers and ex-smokers. Smoking amount and duration were inversely significantly associated with total, direct, and indirect bilirubin. In a multivariable adjusted model, compared to never-smokers, the odds ratios (ORs) and 95% confidence intervals (CIs) of current smokers with the highest number of pack-years were 1.7 (1.6 to 1.9) for total, 1.5 (1.4 to 1.6) for direct, and 1.7 (1.6 to 1.9) for indirect bilirubin. After further adjustment for hemoglobin, this association became stronger (OR [95% CI], 2.1 [1.9 to 2.2] for total; 1.9 [1.8 to 2.0] for direct; 2.0 [1.9 to 2.2] for indirect bilirubin). Conclusions: In this study, bilirubin subtypes are inversely associated with smoking status, smoking amount, and smoking duration in healthy Korean men independently of hemoglobin. Further studies are needed to investigate this association in healthy Korean women.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2001

The spatial resolution of $high-T_{c}$ scanning SQUID microscope is limited by the washer size of SQUID and the gap distance between SQUID sensor and the sample. In this work, we tried to improve the spatial resolution of scanning SQUID microscope by reducing the size of SQUID sensor fabricated with $YBa_2$$Cu_3$$O_{7}$ thin film. Outer dimensions of the SQUiDs we tested are 24 $\mu\textrm{m}$ $\times$ $ 28\mu\textrm{m}$, $12 \mu\textrm{m}$ $\times$ $16\mu\textrm{m}$, $12\mu\textrm{m}$ x $12\mu\textrm{m}$, $10 \mu\textrm{m}$ $\times$ $10 \mu\textrm{m}$ each. To operate them in the flux-locked loop scheme, we used a direct-coupled electronics instead of using conventional electronics involving a modulation scheme. Since the direct-coupled feedback scheme does not require modulation current adjustment that poses as a practical difficulty in the SQUID operation in modulation-scheme, the direct feedback operation is rather simpler than the conventional modulation method. The resulting noise features were dominated by the noise of preamp in FLL electronics except that of the largest SQUID. The noise levels of SQUIDs are expected below 1$\times$$10^{-5}$ $\Phi_{0}$H $z^{1}$2/ (at 300 Hz), that is a typical noise level for SQUID made of $YBa_2$C $u_3$$O_{7}$ thin film. The data acquisition and motion-controlling parts were also improved, resulting in faster data acquisition rate and less vibration of the system.m.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.166-174
• /
• 2015

A direct demand model requires relatively little analysis time and incurs a low cost. It is also known to be useful for the preliminary screening of promising configurations or concepts. This study reviews direct demand models of 12 existing urban railways using demographic data based on a block group level which is approximately 1/24 of a traditional zone area. However, direct demand models are limited. Therefore, a new approach is suggested. The proposed method is based on a field study and an empirical analysis. The study finds factors that affect ridership at the station level. As a case study, the proposed approach is tested using 54 light railway transit stations. The results of this empirical study demonstrate its applicability to improve the error rates of the predicted ridership at the station level.

• Korean Business Review
• /
• v.12
• /
• pp.209-237
• /
• 1999

With the increasing speed of internationalization of corporations under WTO system foreign direct investment is considered as the important means of international cooperation as well as avoiding trade barrier. From this point of view the study on foreign direct investment of Korean corporations is of great importance. Many studies till now, however, are concerned with the macroscopic analysis of foreign direct investment of Korean corporations, not with the establishment of strategy appropriate to the environment of host country and the investment performance. In order to meet the problems mentioned above this thesis aims at accomplishing the following three tasks. (1) synthetic assessment of existing theories of foreign direct investment. (2) systematic adjustment of factors of environment in the foreign direct investment activities. (3) analysis of above factors in the foreign direct investment of Korean textile industry and proper proposal of strategic model for the individual corporation. The results of analysis according to the aim of the study are as follows: (1) To lead foreign direct investment successfully, variable and effective information-presentation should be offered with priority. (2) The investment strategy through regional diversification is required. (3) The localization of decision making has to be attempted assertively. (4) The global network system is needed for more recommendable foreign direct investment. (5) More aggressive and outgoing attitude like developing into the local market and obtaining the high-technology is desperately needed.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.26-33
• /
• 2015

This study suggests systematic procedures to improve safety policies on prevention of industrial accidents associated with industrial machines and devices. Specifically, new method of cause analysis of industrial accidents associated with industrial machines and devices is suggested and the related accident data are re-analyzed. Effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, safety device regulation and safety inspection of industrial machines and devices are also analyzed. Based on those analysis results, transition from the current user-oriented safety device regulation to more balanced direct regulations on both manufacturer and user is suggested. Together with severity and frequency of industrial accidents, unit severity and unit frequency need to be taken into account to further assess the risk associated with a particular industrial machine or device. Balance between safety regulations will be realized by proper adjustment of lists of safety certification and inspection, and certification and inspection standards. This will also guarantee the maximum benefit over cost in such safety regulations.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.579-586
• /
• 2007

The process of developing a online 3D game engine involves designing details of the engine, alpha test, adjustment, supplementation, beta test and introduction, and an online 3D game engine is made of a server engine and client engine. The server engine, which is made of server construction part, distribution center and DB construction part for building asymmetric multiple servers, is developed by Linux, and the client engine, which is made of a graphic part, sound part, AI part and object management part, is developed by using DirectX in Windows, and it proposes an engine configuration and method based on 3D engine technology by analyzing the network technology, which is a common engine technology.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.257-264
• /
• 1999

The lens distortions were corrected directly using the high-order polynomial which was offered in camera calibration data for the forward transformation and the root of Newton-Raphson's $2\times{2}$ nonlinear system for the backward transformation. The 0.04~0.08 pixels increase in accuracy was indicated through the use of direct correction of lens distortions instead of least square methods of commercial software. The least square adjustment method of high-order polynomial requires many control points which has a same weight. But this suggested method which is unnecessary to determine control points was developed and applied. The algorithm showed improved efficacy.