• Journal of Industrial Technology
• /
• v.18
• /
• pp.323-328
• /
• 1998

A current controlled VSI-PWM rectifier and inverter with capacitor dc link is regarded as one of the most promising structures for three-phase to three-phase to three-phase power conversion. This type of converter normally requires twelve switches for a rectifier and inverter composed of self turn-off switch such as a bi-polar transistor or IGBT with an anti-parallel diode. In this paper, a new three-phase to three-phase converter for ac motor drives is proposed. The proposed converter employs only eight switches and has the capability of delivering sinusoidal input currents with unity power factor and bidirectional power flow. This paper describes the feasibility and the operational limitations of the proposed structure. A mathematical model of the system is derived using generalized modulation theory and experimental results for steady state and dynamic behavior are presented to verify the developed model.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.139-143
• /
• 2012

In this study, optical simulation was used to compare three optical structures that could be applied to the typical organic light-emitting diode to increase the outcoupling efficiency. These were spherical scattering particles (treated as Mie scatterers) embedded in the glass substrate, microlenses formed on the glass substrate, and a diffusing layer (DL) with a Gaussian scattering distribution function inserted between the indium tin oxide (ITO) and the glass substrate. It was found that the application of microlens array and that of scattering particles in the glass substrate exhibited similar enhancements in the outcoupling efficiency when the density and the refractive index of the scattering particles were optimized. The DL located at the interface between the glass and the ITO further enhanced the efficiency because it could further extract the trapped light in the waveguide mode. The appropriate combination of these three structures increased the outcoupling efficiency to about 42%, which is much greater than the typical values of 15-20% when there is no optical structure for light extraction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.606-609
• /
• 1999

We fabricated white light-emitting diode which have a mixed single emitting layer containing poly(N-vinylcarbazole), trois(8-hydroxyquinoline)aluminum and poly(3-hexylthiophene) and investigated the emission properties of it. It is possible to obtain a blue light from poly(N-vinylcarbazole). green light from tris(8-hydroxyquinoline)aluminum and red light from poly(3-hexylthiophene). The fabricated device emits white light with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to Alq₃ and P3HT resulted in decreasing the blue light intensity from PVK. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.256-262
• /
• 2018

This study introduces a novel Soft Switching (SS) Pulse Width Modulated (PWM) AC-DC boost converter. In the proposed converter, the main switch is turned on with Zero Voltage Transition (ZVT) and turned off with Zero Current Transition (ZCT). The main diode is turned on with Zero Voltage Switching (ZVS) and turned off with Zero Current Switching (ZCS). The auxiliary switch is turned on and off with ZCS. All auxiliary semiconductor devices are turned on and off with SS. There is no extra current or voltage stress on the main semiconductor devices. The majority of switching energies are transferred to the output by auxiliary transformer. Thus, the current stress of auxiliary switch is significantly reduced. Besides, the proposed converter has simple structure and ease of control due to common ground. The theoretical analysis of the proposed converter is verified by a prototype with 100 kHz switching frequency and 500 W output power. Furthermore, the efficiency of the proposed converter is 98.9% at nominal output power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.46-51
• /
• 2006

We present simulation results for a method designed to extract key parameter values of DFB-type LDs based on ASE spectrum measurements. Comparisons were made between the given (actual) and the extracted (estimated) parameters, as well as the associated spectra, fur a variety of DFB-type LDs, and the two sets of results were found to be in excellent agreement.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.133-141
• /
• 2016

This paper focuses on the development of a Five-Level Flying-Capacitor Dual Buck Inverter (FLFCDBI) based on the main circuit of dual buck inverters. This topology has been described as not having any shoot-through problems, no body-diode reverse recovery problems and the half-cycle work mode found in the traditional Multi-Level Flying-Capacitor Inverter (MLFCI). It has been shown that the flying-capacitor voltages of this inverter can be regulated by the redundant state selection within one pole. The voltage balance of the flying-capacitors can be achieved by charging or discharging in the positive (negative) half cycles by choosing the proper logical algorithms. This system has a simple structure but demonstrates improved performance and reliability. The validity of this inverter is conformed through computer-aided simulation and experimental investigations.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2004-2006
• /
• 2005

트렌치 애노드 컨택을 설계하여 순방향 전압강하를 감소시키는 GaN 쇼트키 장벽 다이오드를 제안하였다. 애노드 내부에 트렌치를 설계하여 제안된 소자의 표면 애노드 컨택은 메탈 일 함수(metal work function)가 높은 Pt와 형성되며, 트렌치 애노드 컨택은 메탈 일 함수가 낮은 Au와 형성된다. 제안된 소자의 전기적 특성을 검증하기 위하여 2차원 수치 해석 시뮬레이션을 수행하였고, AlGaN/GaN 혜테로 접합 구조 위에 제작 및 측정하였다. 제안된 소자는 복잡한 공정 추가 없이 제작되며 $100A/cm^2$에서의 순방향 전압 강하는 0.73V로 기존 소자의 1.25V보다 우수한 특성을 보였다. 제안된 소자의 온 저항은 $1.58m{\Omega}cm^2$로 기존 소자의 온 저항 $8.20m{\Omega}cm^2$ 보다 낮은 장점을 가진다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1592-1601
• /
• 2014

In this study, a novel single phase soft switched power factor correction (PFC) converter is developed with active snubber cell. The active snubber cell provides boost switch both to turn on with zero voltage transition (ZVT) and to turn off with zero current transition (ZCT). As the switching losses in the proposed converter are too low, L and C size can be reduced by increasing the operating frequency. Also, all the semiconductor devices operate with soft switching. There is no additional voltage stress in the boost switch and diode. The proposed converter has a simple structure, low cost and ease of control as well. It has a simple control loop to achieve near unity power factor with the aid of the UC3854. In this study, detailed steady state analysis of the proposed converter is presented and this theoretical analysis is verified by a prototype of 100 kHz and 500 W converter. The measured power factor and efficiency are 0.99 and 97.9% at full load.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.319-326
• /
• 2015

In this paper, a cost-effective single switch multi-channel LED (light emitting diode) driver is proposed. While conventional LED drivers require as many non-isolated DC/DC converters as the number of LED channels, the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simpler structure, with a lower cost and a higher efficiency. Because its power switch can be turned off under the zero current switching condition, it has very desirable advantages such as improved electromagnetic interference characteristics and high efficiency. Moreover, it uses only a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. As a result, the proposed driver exhibits high reliability and is cost effective. To confirm the validity of the proposed driver, a theoretical analysis is performed, and design considerations and experimental results obtained from a prototype that is applicable to a 46" LED-TV are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2003

We report the electrical properties of copper(II)-phthalocyanine(Cu-Pc) as a hole injaction layer in organic light-emitting diode (OLED). OLEDs were constructed by the following material structure : indium tin oxaide (ITO)/ CuPc/ triphenyl-diamine (TPD)/ tris-(8-hydroxyquinoline)aluminum (Alq3)/4-(Dicyanomethlene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)/ Al. we observed that the change of recombination zone by using a DCM detection thin layer (6 ${\AA}$) in a Alq$_3$ emitting layer. layer. Recombination zone was moved toward the cathode as the hole mobility increased due to the heat-treatment temperature of cupc layer increased.