• 제목/요약/키워드: dimethylformamide

검색결과 316건 처리시간 0.023초

$4-Chloro-{\alpha}-(4-chlorophenyl)-{\alpha}-(trichloromethyl)$ Benzyl Alcohol(Dicofol)의 각종유기용매중(各種有機溶媒中)에서의 안정성(安定性) (Stability of $4-Chloro-{\alpha}-(4-chlorophenyl)-{\alpha}-(trichloromethyl)$ Benzyl Alcohol(Dicofol) in Various Organic Solvents)

  • 신현화;홍종욱
    • Applied Biological Chemistry
    • /
    • 제25권3호
    • /
    • pp.177-181
    • /
    • 1982
  • Dicofol의 각종(各種) 유기용매(有機溶媒)에 대(對)한 안정성(安定性)을 조사(調査)하기 위하여 $-5^{\circ}C$에서 7일간(日間) 방치(放置)하여 그 침전생성유무(沈澱搬成有無)를 조사(調査)하고, $50^{\circ}C$에서 56일간(日間) 처리(處理)한 다음 각종용매(各種溶媒)에 대(對)해서 Dicofol의 분해형태(分解形態)를 T.L.C.로 확인(確認)하였으며, 그 주성분(主成分) 분해율(分解率)을 2주(週)간격으로 gas chromatography로 측정(測定)하였다. 그 결과(結果) Dicofol 수화제(水和劑)와 N.N-dimethylformamide 및 cyclohexanone용액(溶液)에서는 Dicofol의 주성분(主成分) 분해율(分解率)이 각각(各各) 1.2%, 6.7%, 13.3%이었으나 xylene, toluene, M.I.B.K. 및 isophorone용액(溶液)에서는 거의 주성분(主成分) 분해(分解)가 일어나지 않았다. 그러나 $-5^{\circ}C$에서 7일간(日間) 방치(放置)하였을 때 isophorone 을 제외(除外)한 xylene, toluene 및 M.I.B.K. 용액(溶液)에서는 침전(沈澱)이 생성(生成)되어 Dicofol의 용제(溶劑)로서는 적합하지 못하였다. 이러한 사실(事實)로 미루어 볼 때 공시(供試)된 각종(各種) 유기용매중(有機溶媒中)에서 Dicofol의 제제상(製劑上) 가장 적합한 용매(溶媒)는 isophorone임을 알았다.

  • PDF

Antifungal Mechanism and Properties of Antibiotic Substances produced by Bacillus subtilis YB-70 as a Biological Control Agent

  • Kim, Yong-Su;Kim, Sang-Dal
    • Journal of Microbiology and Biotechnology
    • /
    • 제4권4호
    • /
    • pp.296-304
    • /
    • 1994
  • Antibiotic substances were produced by Bacillus subtilis YB-70, a potential biocontrol agent found to suppress root-rot of eggplant (Solanum melonggena L) caused by Fusarium solani, in a dextrose glutamate medium and isolated by isoelectric precipitation. Partial purification was performed by column chromatography on silica gel with two solvent systems: chloroform-methanol and methanol-chloroform-water as eluting solvents, This active fraction YBS-1 s contained antifungal activity were soluble in ethanol, methanol, and water, but were not soluble in other solvents including acetone, butanol, ethyl ether, dimethylformamide, propanol, and etc. High performance liquid chromatography and thin layer chromatographic separation of YBS-1s showed that they have been composed of three biological active bands that were named YBS-1A, -1B, and -1C. The substances were stable to heat and resistant to protease. YBS-1s were active against a wide range of plant pathogenic fungi but did not inhibit the growth of bacteria and yeasts. They were not only fungicidal but also fungistatic against chlamydospores of F. solani. The $ED_{50}$ values for the chlamydospore germination and the germ-tube growth of F. solani were $O.725\mu\textrm{m}/ml\;and\;O.562\mu\textrm{m}/ml$, respectively. Microscopic observations proved the substances restricted the growth of phytopathogenic fungus F. solani by spore burst followed by dissolving of its germ-tube, and caused abnormal hyphal swelling after application to chlamydospores or growing hyphae. Cultural filtrate of B; subtilis YB-70 also suppressed the development of root-rot of eggplant in pot tests.

  • PDF

응고화 경로가 고분자막 및 함침 약제 형상 변화에 미치는 영향의 분석 (Effect of Coagulating Conditions on the Morphology of Membrane and Drug Being Impregnated)

  • 한명진;남석태;이재훈
    • 폴리머
    • /
    • 제25권2호
    • /
    • pp.151-160
    • /
    • 2001
  • 결정성 약제가 함침된 생분해성 고분자학이 고분자(poly(d,1-lactide)), 약제(progesterone) 및 용매(dimethylformamide)로 이루어진 고분자용액을 고형화시켜 제조되었다. 용매에 약제 및 고분자를 용해시켜 준비된 제막용액을 유리판 위에 도포한 후, 이로부터 용매를 증발시켜 고형화시키거나, 또는 고분자 및 함침 약제 모두에 비용매로 작용하는 물과 용액 필름에 존재하는 용매를 교환시켜 용액 필름이 응고되도록 하였다. 제조된 고분자막들은 용액 필름의 응고화 경로에 따라 뚜렷하게 다른 형상을 보여주었다. 진공 상태에서 용매의 증발을 통해 응고화되었을 때, 함침 약제인 프로제스테론은 구의 형상을 보여주며 고형화된 고분자 구조에 둘러싸여 막의 내부에 균일하게 분포되었다. 이에 비해, 비용매인 물에 침지시켜 용매와 비용매의 급속한 확산에 의해 응고화시키거나, 대기에 방치시켜 대기에 존재하는 수증기의 흡수에 의해 고분자 희박 지역의 핵 형성을 통한 용액 필름의 액체-액체 상분리를 유도하며 응고화시킨 경우, 함침된 약제는 고분자막 내부에 편상의 결정 구조를 지니며 막 내부에 불균일하게 분포되었다.

  • PDF

Electrospun Antimicrobial Polyurethane Nanofibers Containing Silver Nanoparticles for Biotechnological Applications

  • Sheikh, Faheem A.;Barakat, Nasser A.M.;Kanjwal, Muzafar A.;Chaudhari, Atul A.;Jung, In-Hee;Lee, John-Hwa;Kim, Hak-Yong
    • Macromolecular Research
    • /
    • 제17권9호
    • /
    • pp.688-696
    • /
    • 2009
  • In this study, a new class of polyurethane (PU) nanofibers containing silver (Ag) nanoparticles (NPs) was synthesized by electrospinning. A simple method that did not depending on additional foreign chemicals was used to self synthesize the silver NPs in/on PU nanofibers. The synthesis of silver NPs was carried out by exploiting the reduction ability of N,N-dimethylformamide (DMF), which is used mainly to decompose silver nitrate to silver NPs. Typically, a sol-gel consisting of $AgNO_3$/PU was electrospun and aged for one week. Silver NPs were created in/on PU nanofibers. SEM confirmed the well oriented nanofibers and good dispersion of pure silver NPs. TEM indicated that the Ag NPs were 5 to 20 nm in diameter. XRD demonstrated the good crystalline features of silver metal. The mechanical properties of the nanofiber mats showed improvement with increasing silver NPs content. The fixedness of the silver NPs obtained on PU nanofibers was examined by harsh successive washing of the as-prepared mats using a large amount of water. The results confirmed the good stability of the synthesized nanofiber mats. Two model organisms, E. coli and S. typhimurium, were used to check the antimicrobial influence of these nanofiber mats. Subsequently, antimicrobial tests indicated that the prepared nanofibers have a high bactericidal effect. Accordingly, these results highlight the potential use of these nanofiber mats as antimicrobial agents.

DMF함유 혼합 유기용제에 대한 인화점의 측정과 평가 (Measurement and Evaluation of Flash Point for the DMF Contained Organic Solvent Mixtures)

  • 이정석;한우섭;이근원
    • 한국화재소방학회논문지
    • /
    • 제33권4호
    • /
    • pp.9-15
    • /
    • 2019
  • 본 연구에서는 합성피혁 제조 공정에서 주로 사용되는 혼합 유기용제 중에서 디메틸포름아마이드(Dimethylformamide, DMF)를 기준물질로 톨루엔과 메틸에틸케톤 등이 혼합된 2성분 및 3성분 혼합물질 7종류에 대하여 국제적으로 표준화된 시험방법을 이용하여 인화점을 측정하였다. 그리고 몇 가지 예측모델을 이용하여 인화점을 예측하고 실험결과와 비교하였다. 그 결과, 2성분 혼합물에서 DMF 몰분율이 약 0.7 이하인 경우는 혼합물의 인화점이 25 ℃이하로 관측되어, 고인화점 물질의 혼합에 의한 인화점상승에 대한 효과가 작은 것으로 나타났다. 그리고 평균온도차이를 이용하여 각 모델별 예측값을 평가한 결과, 르샤틀리에 모델의 경우가 1.95 ℃로 측정값에 가장 근사한 것으로 나타났다.

산소전극 시스템에 사용되는 고분자막에 관한 연구 (A Study on Polymeric Membranes for Oxygen-electrode System)

  • 박희영;김현준;정용섭;홍석인
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 춘계 총회 및 학술발표회
    • /
    • pp.52-53
    • /
    • 1995
  • 현재 상용화 되어있는 산소/질소 분리용 고분자 분리막은 비교적 낮은 선택도를 가지고 있다. 즉, 이점은 확산도와 용해도를 조절함으로써 분리막의 투과선택도를 높일 수 있는 가능성을 보여주고 있으며 보다 높은 투과도와 투과선택도를 갖는 새로운 고분자 재료의 선택이 분리막을 통한 기체 분리나 그 상업적 이용에 절실히 요구되고 있다. PSf는 상용성, 화학적 내구력, 강도, 높은 유리전이온도와 우수한 기체투과성질을 가진 고분자로 분리막에 많이 응용되고 있다. Erb 등은 용매로 DMF(dimethylformamide)와 THF(tetrahydrofuran)를 사용하여 막을 제조하였다. 상부 흐름압력이 5atm일때 각 기체의 투과도 계수는, 헬륨이 11, 이산화탄소가 5.5, 메탄이 0.5, 질소가 0.2였으며, PSf막에 대한 각 기체의 투과는 Henry mode보다 Langmuir mode에서 더욱 우세하게 일어난다고 생각하였다. 또한 Ghosal 등은 PSf에 nitro기를 도입한 nitrated PSf의 투과특성을 조사하였다. 실험결과 nitro group이 치환된 PSf막이 nitro group이 없는 막에 비해 투과도는 낮았지만 선택도는 증가하였다. 구조가 다른 여러가지의 PSf막을 통한 기체 투과성질은 Ghem 등에 의해 밝혀졌다. Membrane-covered probes를 이용한 폴라로그램(polarogram) 방법은 산소를 측정하는데 가장 보편적인 방업ㅂ으로, 산소 탐침(oxygen probe)의 원리는 소위 효소 전극을 발전시키는데 이용되어 왔다. 효소전극은 산소와 실험하고자 하는 물질간의 특정한 효소반응에 기초를 둔 다양한 물질의 선택적 측정을 위한 것이다. 이때 센서에 응용되는 합성막은 산소에 대해 선택적인 투과를 해야하며, 상대적으로 높은 산소확산계수와 물에 대해서는 낮은 투과도를 가져야 한다. 높은 산소확산계수는 반응을 빠르게 하는 잇점이 있으며 물에 대한 낮은 투과도는 센서내의 전해질 물질을 유지보호하는 역할을 한다. 분리막이 산소전극에 이용될 경우 높은 산소 확산계수 이외에도 적절한 기계적 강도, 열적 안정성 등이 요구된다.

  • PDF

Poly(vinylidene fluoride-hexafluoropropylene)를 이용한 이차전지용 미세다공성 분리막의 제조와 물성 (Preparation and Characterization of PVdF-HFP Microporous Membranes for Li-ion Rechargeable Battery)

  • 남상용;유대현;정미애;임지원;변홍식;유현오;김종만;서명수
    • 멤브레인
    • /
    • 제17권4호
    • /
    • pp.359-368
    • /
    • 2007
  • 본 연구에서는 불소계 고분자인 PVdF (poly(vinylidene fluoride))에 HFP (hexafluoropropylene)가 결합된 공중합체인 PVdF-HFP로 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 상전이 방법으로 제조하였다. 용매인 DMF (N,N-dimethylformamide)에 PVdF-HFP를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 기공은 증류수로 채워진 응고조에서 용매-빈용매 교환으로 형성되어진다. 얻어진 분리막에서 가장 높은 공극률은 60%로 얻어졌다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였고 UTM (universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF-HFP 30 wt%에서 최대 6.57 MPa의 값을 나타내었다.

Emission Reduction of Air Pollutants Produced from Chemical Plants

  • Lee, Byeong-Kyu;Cho, Sung-Woong
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제15권E호
    • /
    • pp.29-38
    • /
    • 1999
  • This study identified emission sources and emissions of air pollutants such as volatile organic compounds (VOCs), solvents, and acid gases produced from chemical plants. We collected air samples from various processes, reactors and facilities using VOC detectors and workers' experience. We identified chemical structures and emission concentrations of air pollutants. We analyzed total emissions of air pollutants emitted from the chemical plants. Also, we developed some emission reduction technologies based on chemical types and emission situations of the identified air pollutants. For reduction of air emissions of acid gases, we employed a method improving solubility of pollutants by reducing scrubber operation temperature, increasing surface area for effective contact of gas and liquid, and modifying or changing chemicals used in the acid scrubbers. In order to reduce air emissions of both amines and acid gases, which have had different emission sources each other but treated by one scrubber, we first could separate gas components. And then different control techniques based on components of pollutants were applied to the emission sources. That is, we first applied condensation and then acid scrubbing method using H2SO4 solution for amine treatment. However, we only used an acid scrubbing method using H2O and NaOH solution for acid gas treatment. In order to reduce air emissions of solvents such as dimethylformamide and toluene, we applied condensation and activated carbon adsorption. In order to reduce air emissions of mixture gases containing acid gases and slovents, which could not be separated in the processes, we employed a combination of various air pollution control devices. That is, the mixture gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. In addition, for improvement of condensation efficiency of VOCs, we changed the type of the condensers attached in the reactors as a control device modification. Finally, we could successfully reduce air emissions of pollutants produced from various chenmical processes or facilities by use of proper control methods according to the types and specific emission situations of pollutants.

  • PDF

Investigation of Chemotactic Activities in Differentiated HL-60 Cells by a Time-lapse Videomicroscopic Assay

  • Jung, Yun-Jae;Woo, So-Youn;Ryu, Kyung-Ha;Jang, Myoung-Ho;Miyasaka, Masayuki;Seoh, Ju-Young
    • IMMUNE NETWORK
    • /
    • 제6권2호
    • /
    • pp.76-85
    • /
    • 2006
  • Background: Chemotaxis is one of the cardinal functions of leukocytes, which enables them to be recruited efficiently to the right place at the right time. Analyzing chemotactic activities is important not only for the study on leukocyte migration but also for many other applications including development of new drugs interfering with the chemotactic process. However, there are many technical limitations in the conventional in vitro chemotaxis assays. Here we applied a new optical assay to investigate chemotactic activities induced in differentiated HL-60 cells. Methods: HL-60 cells were stimulated with 0.8% dimethylformamide (DMF) for 4 days. The cells were analyzed for morphology, flow cytometry as well as chemotactic activities by a time-lapse videomicroscopic assay using a chemotactic microchamber bearing a fibronectin-coated cover slip and an etched silicon chip. Results: Videomicroscopic observation of the real cellular motions in a stable concentration gradient of chemokines demonstrated that HL-60 cells showed chemotaxis to inflammatory chemokines (CCL3, CCL5 and CXCL8) and also a homeostatic chemokine (CXCL12) after DFM-induced differentiation to granulocytic cells. The cells moved randomly at a speed of $6.99{\pm}1.24{\mu}m/min$ (n=100) in the absence of chemokine. Chemokine stimulation induced directional migration of differentiated HL-60 cells, while they still wandered very much and significantly increased the moving speeds. Conclusion: The locomotive patterns of DMF-stimulated HL-60 cells can be analyzed in detail throughout the course of chemotaxis by the use of a time-lapse videomicroscopic assay. DMF-stimulated HL-60 cells may provide a convenient in vitro model for chemotactic studies of neutrophils.

전기방사를 통해 제조된 정전기 보유 필터의 표면전위 및 대전량에 따른 성능특성 분석 (Characteristic Analysis of Electret Filters made by Electrospinning)

  • 김길태;안영철;이재근
    • 설비공학논문집
    • /
    • 제20권12호
    • /
    • pp.820-824
    • /
    • 2008
  • Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.