• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.532-532
• /
• 2012

탄소 나노튜브(carbon nanotube, CNT)를 사용하여 AC 구동 방식의 organic light emitting devices (OLED)를 만들었다. 이 소자는 ITO가 코팅된 유리 위에 유전체 층, 유기 발광층 그리고 맨 위의 금속 전극 층으로 총 3개의 층으로 구성되어있다. 유전물질로써는 cyanoethyl pullulan (CRS)를 N,N dimethylformamide (DMF) 용매에 녹여 ITO층 위에 코팅하였고, 유기발광 물질로 poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV)를 chloroform (CF)에 녹여 유전체 층 위에 코팅하였다. CNT를 MEH-PPV와 섞어서 유기발광 혼합물을 만들고 난 후, 유전체층 위에 코팅하였다. 마지막으로 알류미늄 전극을 시료 위에 코팅하였다. 소자에서 사용한 MEH-PPV에 의해 나오는 붉은색 발광을 확인 한 결과, CNT를 사용한 OLED 소자가 CNT를 사용하지 않는 소자보다 brightness가 좋았고, 전류도 더 작게 흘렀다. CNT의 농도에 따라 brightness의 변화는 경향을 나타냈다. CNT에 의한 percolation 효과 때문에 이러한 OLED 시료의 성능 향상이 이루어졌음을 입증하는 실험결과를 발표에서 설명할 예정이다.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2004

As a simulation of solvent-assisted dyeing, the solvent effects on the structure of polyethylene terephthalate(PET) film treated by dimethylformamide(DMF) were investigated. The effects were evaluated by the atomic force microscopy(AFM) topographical changes and FT-IR spectrum analysis. PET films treated with DMF at $70^{\circ}C$ for several different treatment time(20, 40, and 60 min). AFM topography showed that, with increasing treatment time by DMF, PET surfaces became smooth due to the swelling phenomenon and the rigid structure changed into flexible state which was contributed to increase the surface area of PET films. FT-IR spectrum analysis showed that DMF and molecular chains of PET interacted each other via their polar carbonyl groups and that DMF also affected the out-of-plane bending vibration mode of phenyl ring of PET.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.777-781
• /
• 2008

In this work, silver nanoparticles-containing polyacrylonitrile (PAN) solutions in N,N-dimethylformamide (DMF) were electrospun to be webs consisting of nanofibers. The inputted voltage and PAN content in the solution were fixed at 15 kV and 10 wt.% in DMF with 10 cm of tip-to-collector distance (TCD). The PAN/Ag nanofiber webs were stabilized by oxidation at 250 ${^{\circ}C}$ for 2 h in air and carbonized at 1000 ${^{\circ}C}$ for 2 h in $N_2$. The resultant diameter distribution and morphologies of the nanofibers were evaluated by scanning electron microscope analysis. The electrochemical behaviors of the nanofiber webs were also observed by cyclic voltammetry tests. It was found that the presence of silver nanoparticles in carbon nanofiber webs led to the increase of specific capacitance and the decrease of fiber diameters.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.14-18
• /
• 2005

Under irradiation in a microwave oven, six novel poly(amide-imide)s containing tetrahydropyrimidinone, tetrahydro-2-thioxopyrimidine moieties and trimellitic rings in their main chains were synthesized through the polycondensation reaction of N,N'-(4,4'-diphenylether)bis(trimellitimide) diacid chloride with six different derivatives of tetrahydropyrimidinone and tetrahydro-2-thioxopyrimidine in the presence of a small amount of a polar organic medium, such as o-cresol. The polycondensation proceeded rapidly and completed within 7-9 min, producing a series of new poly(amide-imide)s in high yield that showed inherent viscosities in the range 0.33-0.52 dL/g. These poly(amide-imide)s were characterized by elemental analysis, viscosity measurement, thermal gravimetric analysis, solubility test, and FT-IR spectroscopy. All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.51-60
• /
• 1994

Chlorodeoxycellulose derivatives have recently assumed importance since the halogen atoms can be changed with other functional groups to afford new derivatives of cellulose. Also, chlorinated cellulose has been employed as an intermediate in the preparation of various functional cellulose derivatives. In this study chlorodeoxycellulose was prepared by reaction of methylcellulose with mathanesulfonylchloride in N,N-dimethylformamide. Subsequently, conversion of the above chlorinated cellulose to unsaturated celluloseen was carried out by potassium tertiary butoxide in dimethyl sulfoxide. An anhydrocellulose as an intermediate for the reactive functional derivatives was made by simple alkali treatment. Preparation condition of allylated methylcellulose by using allylchloride and its thermal behavior were also described.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.32-36
• /
• 1976

The pH titration curves of ampicillin, amoxicillin and cephalexin in aqueous acetone, ethanol and N, N'-dimethylformamide by use of 0.02N-KOH solution showed that 80% acetone was the most effective solvent for alkali titration of them. The pH jumps of samples in 80% acetone were sharp enough to determine the contents of them by use in 80% acetone (9, 4) was coincided with each equivalent point of ampicillin, amoxicillin and cephalexin, but those of phenolphthalein, thymolphthalein, thymol blue and bgrom cresol purple were not. The color change of brom thymol blue at equivalent points was very clear except the case of amoxicillin that the determination of smaples in 80% acetone with 0.02 N-KOH solution by the aid of brom thymol blue could be available.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1329-1332
• /
• 2003

Stepwise dechlorination of 1,2,4-trichlorobenzene was observed at a glassy carbon electrode in dimethylformamide containing 0.1 M tetraethylammonium perchlorate. Especially, dechlorination to dichlorobenzene and further to monochlorobenzene or benzene was successfully demonstrated with a porous reticulated vitreous carbon electrode. Electrochemical dechlorination of polychlorobenzenes employing a flow cell with a reticulated vitreous carbon working electrode is also described. Preliminary experiments with a flow cell showed that dechlorination of trichlorobenzene to dichlorobenzene was partially completed while dechlorination to benzene or monochlorobenzene was not successful, suggesting that a flow rate and electrolysis time should be further optimized for the complete electrolysis.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.71-75
• /
• 2000

Intermolecular cyclization of 2-alkylamino-3-chloro-5,6-dicyanopyrazine 2 in the presence of tributylamine in N,N-dimethylformamide (DMF) gave 5,10-disubstituted-2,3,7,8-tetracyano -5,10-dihydrodipyrazino〔2,3-b:2',3'-e]pyrazines 3, which showed strong mesomorphic property and were anticipated as new chromophoric system for functional dye materials. Absorption spectra, fluorescent properties and other physical properties were correlated with their chemical structures. Vanadyl oligomeric porphyrazine with long alkyl groups synthesized from 3 had satisfactory solubility in tetrahydrofuran (THF), diethyl ether and dimethylsulfoxide (DMSO). The syntheses and characterization of vanadyl polymeric porphyrazines derived from 3 with long alkyl groups are reported.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.499-505
• /
• 2017

Flexible silicon carbide fibrous mats were fabricated by a combination of electrospinning and a polymer-derived ceramics route. Polycarbosilane was used as a solute with various solvent mixtures, such as toluene and dimethylformamide. The electrospun PCS fibrous mats were cured under a halogen vapor atmosphere and heat treated at $1300^{\circ}C$. The structure, fiber morphology, thermal behavior, and crystallization of the fabricated SiC fibrous mats were analyzed via scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermal imaging. The prepared SiC fibrous mats were composed of randomly distributed fibers approximately $3{\mu}m$ in diameter. The heat radiation of the SiC fiber mats reached $1600^{\circ}C$ under microwave radiation at a frequency of 2.45 GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.385-389
• /
• 2010

This paper presents a microfabricated nanowire diluter which dilutes the concentration of nanowires in solution instead of by the conventional centrifuge process. The device has 16 pairs of gold electrodes in a micro channel composed of a glass substrate and PDMS. We prepared nickel nanowires by the template-directed electrodeposition method using nanoporous anodized aluminum template (AAO). We injected the Dimethylformamide (DMF) solution containing nanowires into the inlet of the diluter while applying square wave voltages on the electrodes to trap the nanowires at the subsequent gold electrodes by means of dielectrophoretic attraction forces. The concentration of nanowires at the outlet of the micro channel was changed as we expected, which illustrates that the device can effectively dilute nanowires and can be applied to a controlled assembly of nanowires.