• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.255-265
• /
• 2018

In this paper, the positioning performance index is proposed. The proposed index is used to find satellites that degrade positioning performance to improve the positioning performance. To do this, the proposed index is calculated using the code measurement quality and the DOP. And, through the experiment, the effectiveness of the proposed index is confirmed. In the experiment, the quality of the code measurements is analyzed, and the effectiveness of the proposed index is confirmed by comparing with the result of the precise float solution. Finally, it is shown that the precise float solution performance is improved by using the proposed index.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.13-21
• /
• 2004

GPS is widely used in various applications since GPS receivers are capable of measuring precise position and velocity in any weather condition for a relatively low cost. However, GPS requires more than four simultaneously visible GPS satellites for optimal performance. In high-motion, high-attitude-changing applications, there exist some situations where less than four satellites are visible or where the dilution of precision (DOP) is high. In this paper, we propose a simulation algorithm that predicts the performance of GPS navigation according to changes in vehicle attitude. We have compared simulation results with experimental results, where simulation results of the proposed algorithm are shown to closely match actual experimental data. This algorithm could be used to predict GPS navigational performance and to determine optimal GPS antenna position.

• 한국측량학회지
• /
• 제25권3호
• /
• pp.231-238
• /
• 2007

본 연구에서는 가까운 장래에 실현될 GNSS(Global Navigation Positioning System) 결합측위의 가용성을 평가하기 위하여, GPS(Global Positioning System), Galileo 및 QZSS(Quasi-Zenith Satellites System)의 직달파(direct signal), 반사파(reflected signal), 회절파(diffracted signal) 식별을 위한 신호 전달 모형을 수립하고 이를 3차원 지리정보시스템과 결합함으로써, 위성 가시도와 측위 오차 요소를 모사 측정하였다. 중고층 빌딩이 밀집한 일본 동경도청 부근의 $1km{\times}1km$ 구역을 40,000개의 $5m{\times}5m$ 격자로 구획하여 실시한 시뮬레이션을 통해, GPS 측위와 GNSS 결합측위에 있어서 가시위성의 개수, 위성 고도, 정밀도 저하율(dilution of position : DOP), 의사거리 다중 경로 오차(pseudorange multipath error : PME)를 비교 평가하였다. GNSS 결합측위에서는 가시위성 및 직달파 위성의 개수가 현격히 증가함을 확인할 수 있었으며, 위성고도의 평균은 GPS 측위에서보다 약간 낮게 나타나지만, 위성들의 기하학적 배치가 양호하게 이루어져 정밀도 저하율이 매우 감소함을 알 수 있다. 고밀도 도시공간에서는 빌딩 등의 전파 반사로 인해 발생하는 의사거리 다중경로 오차를 완화하는 것이 사용자 위치 정확도를 향상시키기 위한 핵심적인 요소이므로, 수신기 안테나의 설계 및 배치, 신호처리 및 공간통계 기법 등을 GNSS 결합측위에 적합하도록 개선하는 것이 필요할 것이다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.763-770
• /
• 2005

위성을 이용한 측위 시스템인 광역위성항법시스템(GNSS : Global Navigation Satellite System)은 측량 및 항법 등에 정확한 위치, 속도 그리고 시간 정보를 제공함으로써 위치결정의 중요한 도구가 되어왔다. 미 국방성에 의해 개발되어 운용되고 있는 범세계적위치결정시스템인 GPS는 GNSS 시장에 독점적인 존재이므로, GNSS 사용자는 GPS에 의존할 수 밖에 없는 상황이다. 이런 독점 상황을 극복하기 위하여 러시아, 유럽 그리고 일본은 독자적인 위성항법시스템을 개발하기 시작하였다. 특히 유럽의 Galileo 시스템은 2008년 발사 목표로 진행되고 있다. 본 연구는 위성궤도를 생성하고 분석할 수 있도록 제작한 GIMS2005 프로그램을 이용하여 차세대 GNSS인 Galileo 시스템을 GPS와 비교 분석함에 있다. 본 실험은 GPS 단독 처리의 한계와 GPS/Galileo 결합 시스템의 이점을 인식할 수 있게 한다. 기하구조 분석은 가시위성수, 정밀도 저하율, 내부 신뢰도 그리고 외부 신뢰도를 GPS 단독 처리와 비교하여 분석된다.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.183-192
• /
• 2019

In fingerprint-based wireless positioning, it is necessary to establish a DB of the unmeasured area. To this end, a method of estimating the position of a base station based on a signal propagation model, and a method of estimating the information of the received signal in the unmeasured area based on the estimated position of the base station have been investigating. The purpose of this paper is to estimate the position of the base station using the measured information and to analyze the performance of the positioning. Vehicles equipped with a GPS receiver and signal measuring equipment travel the service area and acquire location-based Reference Signal Received Power (RSRP) measurements. We propose a method of estimating the position of the base station using the measured information. And the performance of the proposed method is analyzed on a simulation basis. The simulation results confirm that the accuracy of the positioning is affected by the measured area and the Dilution of Precision (DOP), the accuracy of the position information obtained by the GPS receiver, and the errors of the signal included in the RSRP. Based on the results of this paper, we can expect that the position of the base station can be estimated and the DB of the unmeasured area can be constructed based on the estimated position of the base stations and the signal propagation model.

• 대한원격탐사학회지
• /
• 제19권3호
• /
• pp.181-190
• /
• 2003

Since the operation of the first satellite-based navigation service, satellite positioning has played an increasing role in both surveying and geodesy, and has become an indispensable tool for precise relative positioning. However, in some situations, e.g. at a low angle of elevation, the use of satellites for navigation is seriously restricted because obstacles like buildings and mountains can block signals. As a mean to resolve this problem, the quasi-zenith satellite system has been proposed as a next-generation satellite navigation system. Quasi-zenith satellite is a system which simultaneously deploys several satellites in a quasi-zenith geostationary orbit so that one of the satellites always stay close to the zenith if viewed from a specific point on the ground of East Asia. Thus, if a position measurement function compatible with CPS is installed in the quasi-zenith and stationary satellites, and these satellites are utilized together with the CPS, four satellites can be accessed simultaneously nearly all day long and a substantial improvement in position measurement, especially in metropolitan areas, can be achieved. The purpose of this paper is to evaluate the effectiveness of quasi-zenith satellite system on positioning accuracy improvement through simulation by using precise orbital information of the satellites and a three-dimensional digital map. Through this developed simulation system, it is possible to calculate the number of simultaneously visible satellites and available area for positioning without the need of actual observation. Furthermore, this system can calculate the Dilution Of Precision (DOP) and the error distribution.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.43-49
• /
• 2000

The Global Positioning System (GPS) is becoming more attractive navigation means for LEO (Low Earth Orbit) spacecraft due to the data accuracy and convenience for utilization. The anomalies such as serious variations of Dilution-Of-Precision (DOP), loss of infrequent 3-dimensional position fix, and deterioration of instantaneous accuracy of position and velocity data could be observed, which have not been appeared during the ground testing. It may cause lots of difficulty for the processing of the orbit control algorithm using the GPS data. In this paper, the characteristics of the GPS data were analyzed according to the configuration of GPS receiver such as position fix algorithm and mask angle using GPS navigation data obtained from the first Korea Multi-Purpose Satellite (KOMPSAT). The problem in orbit tracking using GPS data, including the infrequent deterioration of the accuracy, and an efficient algorithm for its countermeasures has also been introduced. The reliability and efficiency of the modified algorithm were verified by analyzing the effect of the results between algorithm simulation using KOMPSAT flight data and ground simulator.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.403-409
• /
• 2015

The Quasi-Zenith Satellite System (QZSS), a dedicated regional Japanese satellite system currently under development, was designed to complement the performance of the Global Positioning System (GPS). The high elevation angle of the QZSS satellite is expected to enhance the effectiveness of GPS in urban environments. Thus, the work described in this paper, aimed to investigate the effect of QZSS on GPS performance, by processing the GPS and QZSS measurements recorded at the Bohyunsan reference station in South Korea. We used these data, to evaluate the satellite visibility, carrier-to-noise density (C/No), performance of single point positioning, and Dilution of Precision (DOP). The QZSS satellite is currently available over South Korea for 19 hours at an elevation angle of more than 10 degrees. The results showed that the impact of the QZSS on users' vertical positioning is greatest when the satellite is above 80 degrees of elevation. As for Precise Point Positioning (PPP) performance, the combined GPS/QZSS kinematic PPP was found to improve the positioning accuracy compared to the GPS only kinematic PPP.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.79-88
• /
• 2020

We determined Global Positioning System (GPS) satellite visibilities in signal-blockage simulations and then analyzed Position Dilution of Precision (PDOP) fluctuations obtained from those simulated satellite geometries. PDOP values under harsh signal-blockage simulation conditions become very high compared to those calculated with real observations. Especially when the number of observed satellites is four, which is the minimum requirement for GPS positioning, PDOP values instantaneously reached several hundreds or even several tens of thousands. It was also found that the volume of the tetrahedron composed with four satellites decreases significantly. When the correlation of the tetrahedron volume and PDOP was analyzed, we reached the following conclusions: PDOP values less than 4 can be acquired when the volume is larger than 103.2 × 10¹⁹ ㎥, and PDOP values increase beyond 50 when the volume is less than 6.0 × 10¹⁹ ㎥.

• 제어로봇시스템학회논문지
• /
• 제20권1호
• /
• pp.101-105
• /
• 2014

For a localization system, the TDOA (Time Difference of Arrival) measurement and AOA (Angle of Arrival) measurement are often used for estimating target's positions. Although it is known that the accuracy of TDOA based localization is superior to that of AOA based one, it may have a poor vertical accuracy in bad geometrical conditions. This paper, therefore, proposes a localization algorithm in which the vertical position is estimated by AOA measurements and the horizontal one is estimated by TDOA measurement in order to achieve high 3D-location accuracy. And this algorithm is applied to a GPS jammer localization systems because it has a large value of the DOP (Dilution of Precision) when the jammer is located far away from the system. Simulation results demonstrate that the proposed hybrid TDOA/AOA location algorithm gives much higher location accuracy than TDOA or AOA only location.