• Corrosion Science and Technology
• /
• v.2 no.6
• /
• pp.260-265
• /
• 2003

The experimental methods to rapidly and stably reproduce Microbially Influenced Corrosion (MIC) of stainless steel by sulfate-reducing bacteria such as Desulfovibrio vulgaris were developed. In this study, using two types of stainless steel, 304 and 444, obtained from Pohang Steel & Iron Co., Ltd. (POSCO)., three major factors were tested; overall medium composition, dilution ratio, and chloride concentration. In the overall medium tests, three different media were prepared according to $FeSO_4$ concentration; PM (original Postgate's medium No. 2), MPM 1 (modified PM, no $FeSO_4$, MPM 2 (modified PM, 1/10 $FeSO_4$). The effects of various dilution ratios (3, 1, 1/3, 1/10, 1/30, and 1/100 times) and chloride concentrations (0.0067M, 0.01M, 0.05M, and 0.1M) were examined during 2 months cultivation. Through SEM (Scanning Electron Microscopy) observation, the diluted and modified media, particularly the $1/3{\times}MPM$ I medium, showed more micro-pitting points on surfaces compared to the original PM medium. High concentrations of chloride ions (above 0.05M) were not adequate for observation of MIC since those brought about non-microbiologically induced corrosion. From this study, the optimization of medium composition was very effective to routinely observe MIC in a laboratory system.

• Natural Product Sciences
• /
• v.17 no.1
• /
• pp.23-25
• /
• 2011

It has been shown that the butanol extract of Lonicera japonica has antimicrobial and other potentially useful biological activities. The purpose of this study was to determine the in vitro activity of Lonicera japonica compared to other antimicrobial agents against anaerobic bacteria. Specifically, the in vitro activity of the butanol extract was investigated against 104 clinical isolates of anaerobic bacteria using an agar dilution method and the results were compared to erythromycin, cefoxitin, imipenem, clindamycin, and metronidazole. It was found that Lonicera japonica and imipenem were the most active antimicrobial agents tested.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.3-6
• /
• 2012

Purpose : Samsung medical ceter shall find a cause of the interference factor and suggest a solution for it. Materials and Methods : A sample of $^{18}F$-FDG, radioactive pharmaceuticals produced by TRACERlab MX and FASTlab synthesizer. Gel-clot method uses Positive control tube and single test tube. Kinetic chromogenic method uses ENDOSAFE-PTS produced by Charles River. Results : According to Gel clot method of Endotoxin Tests at FASTlab, both turbidity and viscosity increased at 40-fold dilution and Gel clot was detected. In case of TRACERlab MX, Gel clot was detected in most of samples but intermittently not in a few of them. When using ENDOSAFE-PTS, sample CV (Coefficient of Variation) of FASTlab is 0% at all dilution rates whereas spike CV is 0% at 1-fold dilution, 0~35% at 10-fold, 3.6~12.9% at 20-fold, 5.2~7.1% at 30-fold, 1.1~17.4% at 40-fold, spike recovery; 0% at one-fold, 25 ~ 58% at 10-fold, 50 ~ 86% at 20-fold, 70~92% at 30-fold, and 75~120% at 40-fold. Sample CV of TRACERlab MX, is 0% at all dilution rates whereas spike CV is 1.4~4.8% at one-fold dilution, 0.6~19.9% at 10-fold, spike recovery; 35~72% at one-fold dilution and 77~107% at 10-fold. Conclusion : Gel clot does not seem to occur probably to H3PO4 which engages in bonding with Mg2+ion contributing gelation inside PCT. Dilution which is identical to reducing the amount of H3PO4, could remove interfering effects accordingly. Spike recovery was obtained within 70~150% - recommended values of supplier - at 40-fold dilution even in kinetic chromogenic method.

• Composites Research
• /
• v.29 no.4
• /
• pp.125-131
• /
• 2016

In case of CNT mixing with epoxy, epoxy matrix needs to be diluted. This work studied the effect of the dilution condition of epoxy on CNT dispersion. The optimum solvent condition using acetone and DMF was found via mechanical and solubility methods which affects, the epoxy performance. The dispersion using acetone was better than the DMF and thus higher mechanical properties. Four mixing types of CNT particle were performed. To verify the effects of each step between dilution and dispersion, the dispersion between epoxy and CNT was evaluated via the electrical resistance and optical methods. The optimum dispersion was obtained via mechanical test and thermal analysis by DSC. Among four types, the best was to disperse CNT after epoxy and hardeners were diluted respectively.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.253-262
• /
• 2012

With the aim of remediating soils contaminated by heavy metals and oil, experimental research was conducted to evaluate the optimal design factors for remediation in terms of efficient soil washing methods and processes. The experiments employed absorptiometric analysis and gas chromatography methods to reduce the concentration of heavy metals such as cooper (Cu), lead (Pb), and zinc (Zn), and total petroleum hydrocarbons (TPH) in contaminated soils. The experimental processes consisted of deciding on the washing solution, washing time, and dilution ratio for contaminated soils. A dissolution analysis of heavy metals was then performed by the addition of surfactant, based on the results of the decision experiments, and the injection processes of microbes and hydrogen peroxide were selected. The experimental results revealed that reduction effects in contaminated soils under the experimental conditions were most efficient with hydrochloric acid 0.1 mole, washing time 1 hour, and dilution ratio 1:3, individually. Additional reduction effects for heavy metals and TPH were found with the addition of a washing solution of 1% of surfactant. The addition of microbes and hydrogen peroxide caused a reduction in TPH concentration.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3139-3144
• /
• 2010

A model system has been established for the evaluation of the uncertainty of the value from measurements of multiple subsamples by isotope dilution mass spectrometry (IDMS). In this report, we apply this model system for the evaluation of measurement uncertainty in determination of folic acid in infant formula. Five subsamples were analyzed by IDMS. The mean of the measurement results of the five subsamples was assigned as the final measurement value. The standard deviation (s) of the results from five subsamples was attributable to repeatability of the measurement. The uncertainty components in the IDMS measurement methods were categorized into two groups. Group I includes uncertainty components which give common systematic effects to all subsamples and do not contribute to the variation among multiple measurements (repeatability). Group II includes uncertainty components that give random effects on the measurement results, and are related with the measurement repeatability. These random effects are attributed to s. Therefore, the uncertainty of the final value was calculated by combining the standard deviation of the mean of multiple measurements, $s/{\surd}n$ (where n = 5), and the measurement uncertainty associated with the uncertainty components that give systematic effects.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.77-84
• /
• 2008

Experimental study was conducted to clarify the importance of buoyancy effects in laminar lifted flames which have been well understood by cold jet similarity theory. To evaluate buoyancy effects, lifted flame behaviors were systematically observed in methane and propane lifted flames diluted with He as changing the fuel nozzle diameter from 0.1 to 6 mm. Important physical parameters such as fuel strength, flame stretch and flame curvature, which were derived through simple physical scaling laws, were estimated. It is experimentally proven that buoyancy effects are important in relatively large fuel nozzle diameter and large fuel dilution with He. The results of Chen et al., which displayed the existence of stably lifted flames for 0.5

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.116-117
• /
• 2002

This study was conducted to investigate the effects of dilution rate and stored time of semen at 5, 25 and 35$^{\circ}C$ on mobility in liquid rooster semen. At 5$^{\circ}C$ cold temperature, no significant difference were found in sperm mobilities on dilution rate and stored time among treatments stored at 5$^{\circ}C$. Sperm mobility for the conservation of 1 hours at 25$^{\circ}C$ and 3 hours at 35$^{\circ}C$ were significantly higher for 1：2 and 1：3 dilution rate(semen： diluent) groups than for 1：1 dilution rate group(P〈0.05), In Fertility results after artificial insemination with different number of sperm per dole, fertilization rate of liquid rooster semen diluted with skim milk-glucose solution were 90.67, 94.00, 96.00, and 98.67% for 0.2${\times}$10$\^$8//dose, 0.4${\times}$10$\^$8//dose, 1.0${\times}$10$\^$8//dose, and 2.0${\times}$10$\^$8//dose groups, respectively. To have more than 90% fertility, 0.2${\times}$10$\^$8/ sperm per dose for the artificial insemination (AI) could be used, And to have more 94% fertility, 0.4${\times}$10$\^$8/ sperm per dose AI could be used practically.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.691-695
• /
• 2002

This study was performed to examine the cytotoxic effects of the distilled pine-needle extracts against several cancer cell lines. First, cell lines including mice leukemic cancer cell line (L1210), sarcoma 180 and human monocyte-like cancer cells (U937) were tested using XTT methods in uitro. Pine-needle extracts were prepared by pressing the pine needles and distilling it at below 98$^{\circ}C$ and then added to the growth medium in a final dilution of 10, 20, and 40 times. Growth of three kinds of cancer cells was significantly inhibited by more than 50% with the addition of the extracts. Fifty six to seventy six % of inhibition was shown with the 40 times dilution of the extracts. Greater inhibition was achieved with the 20 times dilution (81~90%) and the 10 times dilution (77~89%) of the extracts. Next, other human cancer cell lines including 3 kinds of breast cancer cell lines (T47D, MDA-MB-231 and MW7A) and one hepatoma cell line (SNU-354) were tested with the 20 times dilution of the extract. T47D and MDA-MB-231 cell lines showed lower inhibition (12%) with the addition of the extract. However, MH7A and SNU-354 cell lines showed 64% and 72% inhibition with the extract, respectively. These results suggest that the distilled pine-needle extracts have strong cytotoxic effect on certain cancer cell lines and the intensity of the effect may vary depending on the process of the pine needle.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.35-44
• /
• 2008

Mycelial growth of Lentinula edodes on solid or liquid culture media supplemented with differentconcentrations of oak wood vinegar varied depending on the types of wood vinegar or mushroom varieties used.Oak wood vinegar obtained from traditionally carbonizing kiln (TWV) inhibited mycelial growth of L. edodes atthe dilution level of less than $5{\times}10^{-2}$, but stimulated at $10^{-3}$ to $2{\times}10^{-3}$. Wood vinegar from mechanicallycarbonizing kiln (MWV) inhibited at $10^{-3}$, but stimulated at $2{\times}10^{-3}$. In liquid culture media, both wood vinegarinhibited at $5{\times}10^{-2}$, but stimulated at $2{\times}10^{-3}$. Sanjo-302-ho grown in liquid culture media at $2{\times}10^{-3}$, and Sanrim 2and 3-ho grown at $4{\times}10^{-3}$ showed relatively high degree of wood decay (DWD) and growing ability within wood(GAWW) when these isolates were inoculated onto oak wood logs. TWV completely inhibited mycelial growth ofgreen mold fungi, Trichoderma species, tested at $5{\times}10^{-1}$ dilution level, while MWV inhibited at $5{\times}10^{-1}$ to $5{\times}10^{-2}$dilution level. For Diatrype stigma, TWV inhibited mycelial growth at the dilution level of less than $5{\times}10^{-2}$, whileMWV did 80% of mycelial growth at $10^{-2}$, and 100% at $5{\times}10^{-1}$ dilution level. Fresh and dry weight of fruitingbodies harvested after soaking of wood logs into wood vinegar solutions with different concentrations werecompared, and were the highest at $2.5{\times}10^{-2}$ dilution level. Storage test of fruiting bodies at $10^{\circ}C$ for 10 daysshowed that fruiting bodies harvested after soaking in the solution with $2.5{\times}10^{-2}$ dilution level showed the bestfreshness by general test and color changes. In addition, shear force value of L. edodes fruiting bodies measuredby using texture analyzer showed that $2.5{\times}10^{-2}$ dilution level was the best concentration for keeping flesh texture.