• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-303
• /
• 2014

Flameless combustion, well known as MILD (Moderate Intensity Low oxygen Dilution) combustion or CDC(Colorless Distributed Combustion), is considered as one of the promising technology for achieving low NOx and CO emissions with improving thermal efficiency of combustion system. In this paper, the effects of exhaust gas dilution rate on formation of flameless combustion of liquid fuel were analyzed using three-dimensional numerical simulations for application of gas turbine combustor with high power density. Results show that the local high temperature region was decreased and flame temperature was spatially uniformly distributed due to higher dilution rate of burnt gas as similar pattern of gas phase flameless combustion. But the evaporation and mixing process of liquid fuel are found to be another important factors for formation of flameless combustion.

• Communications for Statistical Applications and Methods
• /
• 제13권3호
• /
• pp.787-794
• /
• 2006

In group testing, the test unit consists of a group of individuals and each group is tested to classify units from a population as infected or non-infected or estimate the infection rate. If the test group is infected, one or more individuals in the group are presumed to be infected. It is assumed in group testing that classification of group as positive or negative is without error. But, the possibility of false negatives as a result of dilution effects happens often in practice, specially in many clinical researches. In this paper, dilution effect models in group testing are discussed and estimation methods of infection rate are proposed when a dilution effect exists.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.245-247
• /
• 2001

In this study, the effects of dilution on the wear behavior of PTAW (Plasma Transferred Arc Welding) Inconel 625, Inconel 718 and Stellite 6 overlays on Nimonic 80A were investigated. Inorder to evaluate the wear performance, two-body and three-body abrasive wear test, and dry sliding wear test were performed. According to wear tests, the wear rate of deposit with dilution 30% was higher than that of dilution 10% by 10%, and it was also found the plastic deformation near worn surface.

• Fisheries and Aquatic Sciences
• /
• 제8권1호
• /
• pp.27-33
• /
• 2005

This is a subsequent study to our previous finding that Pacific oysters, Crassostrea gigas, gained a so-called upper plateau concentration, around 30,000 ng/g dry weight digestive gland for benzo(a)pyrene, showed reproductive behavior but produced their ensuing reproductive outputs damaged. A serial dilution of sediment elutriates from Jinhae Bay, Korea, where pollution was progressive, were exposed to gametes of the Pacific oyster for 0, 5, 10, 20, 30, and 60 min to detail the pollutant effects on very young specimens. There was an apparent critical dilution over which adverse effects are evident. This was $10\%$ of the present sediment elutriate, corresponding to 0.3 ng/g on the basis of total polycyclic aromatic hydrocarbons (PAHs) for the oyster. Within the dilution the embryonic development was not influenced by the duration of exposure to its gamete stage. At higher dilutions over the critical dilution, occurrence of abnormality increased dependent on the pollutant dilution and the duration of exposure. Similar trends were also found in larval mortality. However, overall, the chemical toxicity was more significant to morphogenesis than to survival, suggesting a potential recruitment of the pollutants-induced abnormal larvae in the wild population to threaten the population integrity.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.121-130
• /
• 2014

This paper is the second investigation on the effects of intake flow control methods on the part load performance in a spark ignition engine. In the previous work, two control methods, port throttling and masking, were compared with respect to lean misfire limit, fuel consumption and emissions. In this work, the effects of these two methods on EGR characteristics were studied and simultaneously the differences between EGR and lean combustion as a dilution method were investigated. The results show that EGR limit is expanded up to 23% and 3 ~ 5% improvement in the fuel consumption are achieved around 8 ~ 13% rates by the flow controls comparing with 10% limit and 1.5% reduction around 3% rate of non-control case. The masking method is more effective on the limit expansion than throttling as like as lean misfire limit; however there is no substantial difference in fuel consumptions improvement regardless the control methods except high load condition. Also it is observed that there exist critical EGR rates around which the combustion performance and NOx formation change remarkably and these rates generally coincide with optimum rates for the fuel consumption. In addition, dilution with fresh air is much more advantageous than that of the exhaust gas from the view point of dilution limit and fuel consumption, while utilization of the exhaust gas is more effective on NOx reduction in spite of considerably small dilution compared with the use of fresh air. Finally, the improvement of fuel consumption by massive EGR is highly dependent on the EGR limit at which the engine runs stably, therefore the stratified combustion technique might be a best solution for this purpose.

• 분석과학
• /
• 제8권4호
• /
• pp.427-434
• /
• 1995

Inductively coupled plasma mass spectrometry combined with the isotope dilution method is used for the determination of lithium. The isotope dilution method is based on the addition of a known amount of enriched isotope (spike) to a sample. The analyte concentration is obtained by measuring the altered isotope ratio. The spike solution is calibrated through so called reverse isotope dilution with a primary standard. The spike calibration is an important step to minimize error in the determined concentration. It has been found essential to add spike to a sample and the primary standard so that the two isotope ratios should be as dose as possible. Since lithium is neither corrosive nor toxic, lithium is used as a chemical tracer in the nuclear power plants to measure feedwater flow rate. 99.9% $^7Li$ was injected into a feedwater line of an experimental system and sample were taken downstream to be spiked with 95% $^6Li$ for the isotope dilution measurements. Effects of uncertainties in the spike enrichment and isotope ratio measurement error at various spike-to-sample ratios are presented together with the flow rate measurement results in comparison with a vortex flow meter.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-76
• /
• 2014

The present study has numerically investigated the effects of the oxidizer-side nitrogen dilution on the precise structure and NOx formation characteristics of the turbulent syngas nonpremixed flames. Eulerian particle flamelet model was used to predicted the NOx formation characteristics in the turbulent syngas swirling nonpremixed flames. Current numerical simulation was conducted for the syngas gas turbine combustor. Numericla results indicate that as the H2O portion is increased in diluent, the formation of NOx decreased effectively in turbulent syngas swirl nonpremixed flames.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.119-124
• /
• 2005

Size distribution of diesel particles measured by ELPI and SMPS were compared. The results of ELPI and SMPS showed acceptable agreements in the qualitative comparison but showed differences in the quantitative comparison. In addition, the results of ELPI and SMPS showed a same trend about the change of engine loads. In this study, the effects of dilution methods and measuring positions on the measurement of PM size distribution were also studied by using the SMPS. As results, the decrease of large particles and the increase of small particles were observed when the dilution air was heated. It was also observed that the number concentration of the diesel particles was varied within 20$\%$ by the different measuring positions of 140 cm.

• 미생물학회지
• /
• 제21권3호
• /
• pp.163-169
• /
• 1983

Effects of temperature on the gorwth characteristics and the chemical composition of pseudomonas cells grown under glucose-or methanol-utilizing continuous culture were studied. In a glucose-utilizing continuous culture, optimum dilution rate, agitation, pH, and temperature, for the higher biomass yield were $0.45hr^-$, 7000rpm, pH 7.5, and $30^{\circ}C$, respectively. But in a methanol-utilizing continuous culture, they were $0.125hr^-$, 600rpm, pH 8, and $30^{\circ}C$, respectively. In methanol-utilizing continuous culture, the maximum production rate of the cells was 1.48g, dry wt./1/hr at a dilution rate of $0.45hr^-$, and the cell yield was 0.46g. dry wt./g. glucose. In the methanol-utilizaing continuous culture, the maximum production rate of the cells was 0.33 7g. dry wt./1/hr. at a dilution rate of $0.125hr^-$ and the cell yield was 0.44g dry cell/g. methanol. The contents of protein of the cells increase with the increase ingrowing temperature (from 15 to $30^{\circ}C$), more or less, while the contents of RNA nad carbohydrate of the cells decreased. However, DNA contents of cells growth under the various temperature ranges didn't change. As the temeprature of cultivation rises at a constant dilution rate, the efficiency of RNA in protein synthesis was increased, showing the decreases in the ratio of RNA to protein.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.140-156
• /
• 1997

The combustion characteristics of DI Diesel engine using turbocharging and EGR are numerically studied. Computations are carried out for the wide range of trubochyarged pressures, EGR ratios, and Ar/He dilution. Numerical results indicate that the Ar/He dilution in the intake gas significantly influence the engine performance, the spray combustion process, and the pollutant formation.