• Title/Summary/Keyword: dilution effects

Search Result 406, Processing Time 0.027 seconds

Effect of White Water Quality on AKD Sizing of Linerboard (백수의 수질에 따른 라이너지의 AKD 사이징)

  • Lee, Hak-Lae;Seo, Man-Seok;Shin, Jong-Ho;Youn, Hye-Jung
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.38 no.2 s.115
    • /
    • pp.9-15
    • /
    • 2006
  • Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

Effects of Oxidant Addition to Fuel on Soot Formation of Laminar Diffusion Flames (동축류 확산화염의 매연생성에 미치는 연료에 첨가된 산화제의 영향)

  • Lee, Won-Nam
    • Journal of the Korean Society of Combustion
    • /
    • v.3 no.1
    • /
    • pp.11-19
    • /
    • 1998
  • The influence of oxidant addition on soot formation is investigated experimentally with ethylene, propane and mixture fuel co-flow diffusion flames. Oxidant addition into fuel shows the increase of integrated soot volume fractions for ethylene, ethylene/ethane and ethylene/methane mixture flames. However, the increase of integrated soot volume fraction with oxidant addition was not significant for propane and ethylene/propane mixture flames. This discrepancy is explained with $C_2\;and\;C_3$ chemistry at the early stage of soot formation process. The oxidant addition increases the concentration of $C_3H_3$ in the soot formation region, and therefore, enhances soot formation process. A new soot formation rate model that includes both dilution effect and chemical effect of oxygen is suggested to interpret the increase of integrated soot volume fractions with oxidant addition into ethylene. Also, the role of adiabatic flame temperature for the chemical effect of oxygen addition into fuel was reviewed. The influence of oxidant or diluent addition into fuel on soot formation process are the fuel dilution effect, the adiabatic flame temperature altering effect and/or the chemical effect of oxygen. Their relative importance could change with fuel structure and adiabatic flame temperature.

  • PDF

Research & Development of High Performance & Multi-Functional New Grouting Materials for Ground Improvement & Reinforcement (고성능 다기능 특수 그라우트 신재료 개발 및 기초지반보강재로의 사례 연구)

  • Park, Bong-Geun;Cho, Kook-Hwan;Na, Kyung;Yoon, Tae-Gook;Lee, Yong-Jun
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.03a
    • /
    • pp.338-350
    • /
    • 2010
  • As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

  • PDF

Stress Expression by the Maternally Transferred Xenobiotic Pollutants in the Reproductive Outputs of the Pacific Oyster, Crassostrea gigas

  • Jo, Qtae;Choy, Eun-Jung;Lee, Su-Jeong;Cho, Yong-Chul;Lee, Chu;Kim, Yoon
    • Journal of Aquaculture
    • /
    • v.18 no.3
    • /
    • pp.200-206
    • /
    • 2005
  • We previously pointed out that the polluted sediment elutriate manifestly affected the early events of reproductive outputs in the Pacific oysters, Crassostrea gigas. A serial dilution of priority xenobiotic sediment elutriates determined by gas chromatography/mass spectrometry (GC/MS) were exposed to gametes of the oyster with different stress burdens to detail the maternal stress transfer to its reproductive outputs. There was an apparent critical concentration over which survival and morphogenesis were significantly affected with more profound damage in morphogenesis. The critical concentration which drives mortality and abnormal morphogenesis of the larvae corresponded to a dilution between 10 and 20% of our elutriate. The adverse effects of the early lives by the xenobiotic exposure over the critical concentration were magnified by the maternal stress from the exposed benzo(a)pyrene (BaP), one of the priority polyaromatic hydrocarbons (PAHs) during the maturation condition. These results indicate that maternal transfer of the xenobiotic compounds from oysters living in the contaminated location might represent a significant adverse effect to their larval population of wild seeds.

Combustion Characteristics of a Turbulent Non-premixed Flame Using High Preheated Air (고온 예열 공기에 의한 난류 비예혼합 화염의 연소 특성)

  • Kwark, Ji-Hyun;Jeon, Chung-Hwan;Chang, Young-June
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.27 no.5
    • /
    • pp.561-568
    • /
    • 2003
  • An experiment using high preheated air in a turbulent non-premixed flame was performed to investigate the effects of high preheated air on the combustion characteristics. Combustion using high preheated and diluted air with flue gas is a new technology which enables NO emission to be reduced. In this study, Na was used as diluent and propane as fuel. Combustion characteristics, especially the distributions of the flame temperature, NO concentration and OH radical intensity were examined under the condition of 300 K, 600 K, 1000 K in terms of the combustion air temperature, and also under the condition of the dilution level from 21% to 13% in terms of oxygen concentration. As the preheated air temperature increased, it appeared that the flame length became shorter, maximum flame temperature increased, the reaction region moved to upstream, and NO concentration increased, but the flame temperature's fluctuation was reduced. In opposite, it was shown with decrement of oxygen concentration at the maximum temperature that both maximum value and the gradient of the flame temperature decreased, and NO emission also decreased considerably, but its fluctuation became larger, being inclined to be unstable.

Effect of Diluent Salt Concentration and pH on the Enumeration of Vibrio parahaemolyticus by Direct Plating on Selective Agar

  • Lee, Jong-Kyung;Jung, Da-Wa;Yoon, Ki-Sun;Yoon, Sun-Kyung;Kwak, No-Seong
    • Food Science and Biotechnology
    • /
    • v.15 no.6
    • /
    • pp.866-870
    • /
    • 2006
  • The maintenance of physiological activity during dilution is very critical for the accurate enumeration of Vibrio spp. in marine samples. We investigated the effect of various diluents on the recovery of Vibrio parahaemolyticus using the direct plate counting and most probable number (MPN) methods. The effects of NaCl (0.85 and 3%) and pH (from 6.6 to 7.4) in diluents based on distilled water or phosphate buffered saline (PBS) were evaluated with three V. parahaemolyticus strains. PBS-3% NaCl (pH 6.6), as opposed to PBS, was the most effective diluent at maintaining viable cell numbers up to 2 log CFU/g during dilution for direct plate counting using on thiosulfate citrate bile salts sucrose (TCBS) selective agar, as well as minimizing the difference in cell numbers between TCBS and non-selective nutrient agar. It also increased counts of V parahaemolyticus inoculated into oysters relative to PBS (p<0.01), suggesting that PBS-3% NaCl (PH 6.6) can reduce the problem of underestimating V. parhaemolyticus counts using PBS alone.

Effect of Cultivar and Processing on the Hemagglutinin Activity of Soybean

  • Felipe, Penelope;Sok, Dai-Eun;Heo, Ok-Soon;Kim, Hyoung-Chin;Yoon, Won-Kee;Kim, Hwan-Mook;Kim, Mee-Ree
    • Food Science and Biotechnology
    • /
    • v.15 no.1
    • /
    • pp.91-95
    • /
    • 2006
  • Effects of cultivars, cooking, and processing on hemagglutinin activity were evaluated by observing macroscopic hemagglutination using serial twofold dilution of trypsinized human blood type-O or rabbit blood. Hemagglutinin activity was expressed as maximal geometric dilution fold. Agglutination of rabbit blood was more sensitive compared to human blood. Hemagglutinin activities of glyphosate-tolerant soybean, HS2906, and imported conventional soybeans were not statistically different, although significant differences were observed among conventional soybean cultivars cultivated in Korea (286 to 1535 HU/mg protein). Time required to reach fifty percent inhibition of hemagglutinin activity ($IT_{50}$) value decreased with increasing cooking temperature and pressure. Most effective conventional cooking method to inhibit hemagglutinin activity was pressure-cooking ($IT_{50}$: 1.36 min). Calculated activation energy based on reaction rate constant was 4.88 kcal. No hemagglutinin activities were detected in processed soybean products such as tofu, soybean paste, and soysauce.

Effect of the various aqua-acupunctures of Hwanggum(黃芩) on proliferation of preadipocyte 3T3-L1 cells (다양(多樣)한 황금약침제제(黃芩藥鍼製劑)가 전지방세포(前脂肪細胞) 3T3-L1의 증식(增殖)에 미치는 영향(影響))

  • Kim, Ho-Kyoung;Kang, Eun-Jung;Ko, Byoung-Seob
    • The Journal of Korean Medicine
    • /
    • v.19 no.1
    • /
    • pp.358-367
    • /
    • 1998
  • These studies were conducted to investigate the effects of the various aqua-aqupunctures of Hwanggum(Scutellariae Radix) on the proliferation of 3T3-Ll cells. They were tested by means of Sulforhodamin B(SRB) assay. The results were summerized as follows: All tested aqua-aqupunctures inhibited the proliferation of preadipose 3T3-Ll cells. In case of the dilution of Hwanggum aqua-aqupuncture(HG), the results were quite opposite. In 1000 times dilution of HG(${\times}1000$), a low concentration increased the proliferation of preadipose 3T3-Ll cells, but the high($100{\mu}l\;and\;200{\mu}l$) concentration inhibited it. These results suggest that Hwanggum aqua-aqupunctures may be used on the obesity induced by the overgrowth of preadipose 3T3-Ll cells.

  • PDF

Effects of Volatile Solid Concentration and Mixing Ratio on Hydrogen Production by Co-Digesting Molasses Wastewater and Sewage Sludge

  • Lee, Jung-Yeol;Wee, Daehyun;Cho, Kyung-Suk
    • Journal of Microbiology and Biotechnology
    • /
    • v.24 no.11
    • /
    • pp.1542-1550
    • /
    • 2014
  • Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.

A Study on the Optimum Ratio of Starch and Dilution Factors of Yuza Extract in Preparation of Yuza Pyun (유자차 부산물을 이용한 유자 과편의 최적화 연구)

  • Nam Hae-Won;Hyon Young-Hee;Pyun Jin-Won
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.14 no.6
    • /
    • pp.591-597
    • /
    • 2004
  • This study was performed to develop a standardized recipe for yuza pyun made of citron juice that is by-product of citron tea, to increase the utilization of citron. The effects of mungbean starch(15%, 18%) and dilution ratio of yuza extract(100%, 75%, 50%) on the quality characteristics were evaluated. The quality characteristics of the samples were estimated in terms of sweetness, color difference, texture profile analysis and sensory evaluation. Sweetness of the 18% mungbean groups were higher than 15% groups(p<0.001). The values of Hunter color system indicated that higher content of yuza extract tended to increase yellowness significantly(p<0.001). Texture profiles of hardness, adhesiveness, springiness, cohesiveness, gumminess of yuza pyun showed no significant differences among samples. For sensory evaluation, color and sourness were decreased as yuza extract was diluted, whereas elasticity and sweetness were increased. Yuza pyun containing 18% of mungbean starch with 50% diluted extract was the most preferred in overall acceptability. According to multiple regression analysis, color, sweetness, elasticity and sourness(in order) were important control factors in overall acceptability.

  • PDF