• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.45-51
• /
• 2000

This paper describes real-time implementation of a multi-channel G.729A speech coder using a 16 bit fixed-point Digital Signal Processor (DSP) and its application to a Voice Mailing Service (VMS) system. TMS320C549 by Texas Instruments was used as a fixed point DSP chip and a 4 channel G.729A coder was implemented on the chip. The implemented coder required 14.5 MIPS for the encoder and 3.6 MIPS for the decoder at each channel. In addition, memories required by the coder were 9.88K words and 1.69K words for code and data sections, respectively. As a result, the developed VMS system that accommodates two DSP chips was able to support totally 8 channels. Experimental results showed that the our multi-channel coder passes all of test vectors provided by ITU-T.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.509-517
• /
• 2013

In this paper, we researched a method that makes a good acoustic-speech system using a digital signal processing technique with dynamic microphone as a transducer. Good acoustic-speech system should deliver the original sound input to electric signal without distortion. By measuring the frequency response of the microphone, adjustment factors are obtained by comparing measured data and standard frequency response of microphone for each frequency band. The final sound levels are obtained using the developed adjustment factors of frequency responses from the microphone and speaker to match the original sound levels using the digital signal processing technique. Then, we minimize the changes in the frequency response and level due to the variation of the distance from source to microphone, where the frequency responses were measured according to the distance changes.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.135-140
• /
• 2013

Noise estimation and detection algorithm to adapt quickly to changing noise environment using the LMS Filter. However, the LMS Filter for noise estimation for a certain period of time and need time to adapt. If the signal changes occur, have the disadvantage of being more adaptive time-consuming. Therefore, noise removal method is proposed to a frame basis AELMS Filter to compensate. In this paper, we split the input signal on a frame basis in noisy environments. Remove the LMS Filter by configuring noise predictions using the mean and variance. Noise, even if the environment changes fast adaptation time to remove the noise. Remove noise and environmental noise and speech input signal is mixed to maintain the unique characteristics of the voice is a way to reduce the damage of voice information. Noise removal method using a frame basis AELMS Filter To evaluate the performance of the noise removal. Experimental results, the attenuation obtained by removing the noise of the changing environment was improved by an average of 6.8dB.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1744-1749
• /
• 2013

Acoustic feedback is perceived as whistling or howling, which is a major complaint of hearing-aids users. Acoustic feedback cancellation is important in hearing-aids because acoustic feedback degrades performance of the hearing aid device by reducing maximum insertion gain. Adaptive systems for estimate acoustic feedback path and feedback suppression algorithms have been proposed in order to solve this problem. A typical feedback cancellation algorithm is LMS(least mean squares) because of its computational efficiency. However it has problem of convergence performance in high correlated input signal. In this paper, we propose a new variable step-size normalized LMS(least mean squares) algorithm using VAD(voice activity detection) to overcome the limitation of the LMS algorithm. The VAD algorithm is GSAP(global speech absence probability) and the feedback cancellation algorithm is normalized LMS. The proposed algorithm applies different step-size between voice and non-voice using VAD, for high stability, fast convergence speed and low misalignment when correlated inputs, such as speech. The result of simulation with white noise mixed speech signal, the proposed algorithm shows high performance then traditional algorithm in terms of stability, convergence speed and misalignment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.75-80
• /
• 1998

This paper proposes a novel computer human interface, named Virtual Wireless Microphone (VWM), which utilizes computer vision and signal processing. It integrates real-time face tracking and sound signal processing. VWM is intended to be used as a speech signal input method for human computer interaction, especially for autonomous intelligent agent that interacts with humans like as digital secretary. Utilizing VWM, the agent can clearly listen human master's voice remotely as if a wireless microphone was put just in front of the master.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.429-438
• /
• 1986

In this paper we have designed and implemented a real-time, full-duplex SBC (sub-band coding) codec at 16kbps using a high speed digital signal processor, NEC 7720. The SBC codec employs a QMF(quadrature mirror filter) filter bank based on the tree structures of two-band analysis-synthesis pairs to partition speech signal into 4 octabe bands. Computer simulation has been done to investigate the effect of fixed-point computation of the NEC 7720. Three different performance measures, the conventional signal-to-noise ratio, the informal listening test, and an LPC(linear predictive coding)distance measure, have been used in this simulation. The necessary parameters have been optimized through the simulation. The developed hardware and software have been tested in real-time operation using a hardware emulator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.5-12
• /
• 1982

Through the use of energy ratio of special bandwidths of basic vowels, recognition of Korean basic spoken digit is performed in logical combination with a zero-crossing rate and an energy parameter. In the experiments for recognition of the digits, the speech signal of spoken digits is filtered by a lowpass filter of which the cutoff frequency is 10KHz, and then sampled at 20KHz of sampling rate, In the speech signal processing, we used four FIR digital filters, and the order of filter lengths is 61, 120, 25, 25respectively. The filters are designed by using Remetz exchange algorithm.[13],[14] As a result, the recognition rate of 92% for the three speakers is obstained.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.38-42
• /
• 2005

CMOS analog lowpass filters using speech signal bandwidth for a Asymmetrical Digital Subscriver Line(ADSL) modem are presented. Designed active lowpass filters are composed of the CMOS complementary high-swing cascode stage which can increase transconductance of an active element. As a result, their cutoff frequency are 138kHz and 1,100kHz respectively. A low-voltage high-swing cascode integrator which improved on a gain and unit gain frequency used to design the filters. The designed filters are verified by HSPICE simulation with the $0.251{\mu}m\;CMOS\;n-well$ Parameter and a single 2.5V power supply.

• Speech Sciences
• /
• v.9 no.3
• /
• pp.17-24
• /
• 2002

The goal of this research is the real-time implementation of an AEC (Acoustic Echo Canceller) using the floating-point digital signal processor of TMS320C31. We employ an FIR-type adaptive filter with the conventional NLMS (Normalized Least Mean Square) algorithm for the adaptation of filter coefficients. We program and optimize the system in the assembler level to make it run in real-time. With 8 kHz sampling rate, the implemented AEC requires $46\;\mu$sec and $77\;\mu$sec computational time per sample for 128-and 256-tap filter, respectively. It corresponds to 37% and 62% of maximum computational ability of TMS320C31 DSP.

• Speech Sciences
• /
• v.11 no.3
• /
• pp.175-180
• /
• 2004

In case of the hearing impairment with tinnitus and increased sound sensitivity, it is known that the patients tend to appeal the psychologically oriented social handicap rather than communication disability. The audiologist who is responsible for such patients in aural rehabilitation should pay special attention to the counseling techniques including tinnitus retain therapy (TRT), ear protector, noise generator, or specific acoustic training based on close cooperation and rapport. And then the audiologist should try to lessen their reaction to the tinnitus by using a hearing aid. This therapies tries to focus not a. total approach but a treatment to lessen the severity of tinnitus. This paper as a case report that a unilateral sharply slopped sensorineural hearing impaired person with tinnitus and increased sound sensitivity by using four channel digital signal processing (DSP) hearing aid with programming increment at low level (PILL).