• Journal of electromagnetic engineering and science
• /
• v.17 no.3
• /
• pp.138-146
• /
• 2017

A phase-locked dielectric resonator oscillator (PLDRO) is an essential component of millimeter-wave communication, in which phase noise is critical for satisfactory performance. The general structure of a PLDRO typically includes a dual loop of digital phase-locked loop (PLL) and analog PLL. A dual-loop PLDRO structure is generally used. The digital PLL generates an internal voltage controlled crystal oscillator (VCXO) frequency locked to an external reference frequency, and the analog PLL loop generates a DRO frequency locked to an internal VCXO frequency. A dual loop is used to ease the phase-locked frequency by using an internal VCXO. However, some of the output frequencies in each PLL structure worsen the phase noise because of the N divider ratio increase in the digital phase-locked loop integrated circuit. This study examines the design aspects of an interconnected PLL structure. In the proposed structure, the voltage tuning; which uses a varactor diode for the phase tracking of VCXO to match with the external reference) port of the VCXO in the digital PLL is controlled by one output port of the frequency divider in the analog PLL. We compare the proposed scheme with a typical PLDRO in terms of phase noise to show that the proposed structure has no performance degradation.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.321-329
• /
• 2006

The ultimate target cf this study is to develop ship's Digital Compass that can substitute for conventional ship's Magnetic Compass. At first, a new Digital Compass system consisting of three-axis Flux-gate sensors and small sized step motor was developed Then, new deviation adjustment theory incorporating with Kalman filter method was proposed through which automatic deviation analysis and correction are obtainable without ship's swinging procedures. The effectiveness of developed Digital Compass and proposed deviation adjustment theory are verified throughout the performance evaluation tests on the training ship 'SAE-NU-RI'.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.77-85
• /
• 2006

The last target of this study is to develop ship's Digital Compass that can be substitute with conventional ship's Magnetic Compass. At first, new Digital Compass system was developed with three-axis high accuracy Flux-gate sensors and small sized step motor. Then after, new deviation correction theory without ship's swinging procedures was proposed to provide automatic deviation analysis, correction and renewal. Throughout the performance evaluation tests on the training ship 'SAE-NU-RI', the effectiveness of developed Digital Compass and proposed deviation correction theory are verified.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.159-167
• /
• 2015

The nature of port logistics requires global visibility and traceability. However, the traditional RFID technology still applied cannot meet these demands. IP-USN and M2M in port logistics have faced challenges of the prerequisite of network composition and immense communications at the base where a grand number of containers are installed. To resolve the issue, this study suggests an IP-RFID-based smart port logistics service platform. The IP-RFID-based port logistics service system resolved the communication problem by separating the RFID tag and AP, which allows internet connection, from the tag. The tags connected with thermo-sensors, humidity sensors, pressure sensors, GPS, etc. are attached to the containers insuring global visibility and traceability, key factors in logistics, by obtaining desired real-time information regardless of time and location.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.297-304
• /
• 2010

This paper presents a link layer design of DisplayPort interface with a state machine based on packet processing. The DisplayPort link layer provides isochronous video/audio transport service, link service, and device service. The merged video, audio main link, and AUX channel controller are implemented with 7,648 LUTs(Loop Up Tables), 6020 register, and 821,760 of block memory bits synthesized using a FPGA board and it operates at 203.32MHz.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.779-784
• /
• 2007

This paper describes a new progressive embedded Internet Protocol(IP) camera available for real-time image transmission. It was applied for ship safety and security on seashore area. The functions of developed embedded system was more effective and excellent than conventional systems. Nowadays, each nation has established harbor security systems to jump up their ports to international port. Recently Incheon port has tried to change man security into center security system used by image security system. The security system of Incheon port has some advantages like effectivity of security system and reduction of manpower and cost, installed by image security system with CCTV cameras at the entrance gate and around the fence. Thus in this paper, we have designed and implemented a Personal Digital Assistants(PDA) based Image Surveillance System for Harbor Security using IP Camera under ubiquitous environment. This system has big advantages which are more effective in an emergency and low cost and small manpower than conventional systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.615-618
• /
• 2006

The broadband power detector for direct- onversion Six-port output circuit was designed and implementaed in this paper. The power detector should linearly operated to produce the linear amplitude and phase signal fer input RF signal in required broadband. So, the power detector should be designed under conditions of matching circuit with low VSWR. The designed power detectors, which were implemented in L-band with 50 ohm matching and Ku-band with matching circuit and isolator, respectively, were evaluated in the performances.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.726-728
• /
• 2016

In this paper, a realtime MIDI controller is designed using leap motion. The controller makes virtual MIDI port on Windows that it is connected to the port and protocol for communication with DAW or VST. It is converted MIDI data when it is detected a real time the position and shape of hand. This converted data transfer MIDI port by MIDI CC(Control Change). Therefore this controller has the purpose to support flexible MIDI input function than existed MIDI controller.

• Journal of Navigation and Port Research
• /
• v.42 no.5
• /
• pp.347-356
• /
• 2018

The presence of the Fourth Industrial Revolution is omniscient, led by full force emergence of technologies that make biological, physical, and digital worlds borderless. All industries which jump on the bandwagon, can observe convergence and merging of bushiness happening within, between and across industries. As the shipping and port logistics industry is said to be in eye of this storm, the purpose of this study is to investigate the shipping and port logistics industry's awareness regarding 4th IR, as well to identify necessary countermeasures in responding to progression of this trend. Analytic Hierarchy Process (AHP) methodology was then used to compare the importance of four phases of countermeasures, reviewed by experts in the field. Results showed that countermeasures should be first orchestrated to the 'Merging and Integration of Inter-industry', then followed by 'P reemptive Introduction of Advanced Technology', 'Expansion of Intra-industry Businesses', and eventually 'Automation, Unmanned Technology'. Last but not least, four phases of countermeasures which should be introduced and executed one phase after another, are outlined for the shipping and port logistics industry to boost its competitiveness in addressing this progressive trend.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.167-176
• /
• 2021

Incheon Port urgently requires designation of a free trade zone to pursue development linked with the port hinterland while promoting continuous growth of the port. This study aims to evaluate the optimal location and derive policy implications for the designation of a free trade zone and analyzed factors property divided by groups. This study used the Consistent Fuzzy Preference Relation (CFPR) analysis technique to derive a practical construction direction by quantifying and evaluating linguistic measures. As a result, the Incheon New Port hinterland showed the highest location competitiveness among the four candidate areas of Incheon New Port hinterland, Aam Logistics Complex 2, North Port hinterland, and Gyeongin Port hinterland. Among the eight evaluation factors consisting of qualitative and quantitative factors, the Incheon New Port hinterland ranked no. 1 in all the four qualitative factors and one quantitative factor and received the highest total score. Also, Group 1 presented 'possibility to attract tenant companies' as first. Group 2 was 'complex size' and Group 3 was also 'possibility to attract tenant companies'. This study has the implication for suggesting the factors and evaluation structure of Free Trade Zone. Future research requires detailed empirical studies, such as expanding the subject of study or selecting factors that reflect the interests of each group.