• 제목/요약/키워드: digital port

검색결과 364건 처리시간 0.028초

레이다아 영상의 디지털 영화처리 (Digital Image Processing of Radar Image)

  • 손진현;홍창홍;류대근;김동일;김기문
    • 한국항해학회지
    • /
    • 제13권1호
    • /
    • pp.11-20
    • /
    • 1989
  • Radar image data were collected through the on-line data acquisition system of A/D converter and personal computer, and the image was restorated on CRT or plotter after digital image processing of the data. The digital image processing system which was developed for this study, consisted of some kinds of software as follows : rearrangement, transformation, and enhancement of the image data in real space or frequency space by Fourier transform, edge detection of the image, compact processing, state inferential processing, and so on. Since the image of PPI radar sweeps from the center to the circumference of a circle, the image within a given period has the shape of fan. Therefore the acquired data were transformed to have the same interval as that of data in outmost concentricity. The results of various image processing methods using transformed data were better than those of the methods using original data.

  • PDF

디스플레이포트1.1a 표준 기반 멀티플 비디오 스트리밍 컨트롤러 설계 (DisplayPort 1.1a Standard Based Multiple Video Streaming Controller Design)

  • 장지훈;임상순;송병철;강진구
    • 대한전자공학회논문지SD
    • /
    • 제48권11호
    • /
    • pp.27-33
    • /
    • 2011
  • 최근 디스플레이 시장이 성장하며 많은 디스플레이 장치에서 디지털 디스플레이 인터페이스를 지원하고 있는 추세다. 디스플레이포트는 차세대 디스플레이 인터페이스로서 PC, 프로젝터 및 고해상도 콘텐츠 응용 프로그램 등에 광범위하게 사용되는 연결 솔루션으로 개발이 되었으며 본 논문은 디스플레이포트 v1.1a 표준에 적합한 메인 링크의 동작을 기초로 하여 멀티플 비디오 스트리밍을 구현함으로써 디스플레이 포트의 한계점으로 지적되고 있는 Source Device와 Sink Device간의 인터페이스뿐만이 아닌 Sink Device와 Sink Device간의 인터페이스를 통해 2개 이상의 다른 이미지 데이터를 디스플레이 포트 v1.1a 표준에서 명시되어있는 4개의 Lane에서 별도의 Lane의 추가 없이 한 번에 전송함으로 2대 이상의 디스플레이 장치에 출력이 가능하도록 구현하였다. 설계된 시스템은 Verilog HDL로 설계 되었으며, 설계된 멀티플 비디오 스트리밍 IP는 Altera Audio/Video 개발 보드(Stratix II GX FPGA Chip)를 이용하여 Quartus II 소프트웨어를 이용해 합성한 결과 6,222 ALUTs와 6,686 레지스터, 999,424 비트의 메모리를 사용하였으며, 최대 동작 속도는203MHz의 성능을 확인 하였다.

2차원적 음원추적에 관한 연구III - 디지털 신호처리를 중심으로 - (A Study on 2-Dimensional Sound Source Tracking System III - mainly on digital signal processing -)

  • 문성배;전승환
    • 한국항해학회지
    • /
    • 제24권5호
    • /
    • pp.443-450
    • /
    • 2000
  • Before some experiments were carried out with analog bandpass filter which used for filtering the noise included in sound source signal. And this filter was constituted by condenser, register and operational amplifier. Hut these elements made the phase characteristics to differentiate in each sensing channel and cause a little of measurement error. We made new measurement system that was substituted digital filter for the analog filter in order to develop the optimal system which could find the time delay between each sensors with high accuracy. This paper describes the new system's constitution and the function of each parts. Specially three digital filters were designed and applied to the digital signal processing Part. And a series of experiments were carried out with the source's distance 9.53meters and the random bearing interval within the limits of $0^{\circ}$ ~ $180^{\circ}$. As a result, we have recognized that the accuracy of measurements were differentiated by the methods what kind of digital filter were adopted. And we have confirmed the facts that IIR LPF was suitable for sound source's bearing measurement and FIR LPF reduced the range measurement error.

  • PDF

Digital Literacy Skills and Utilization of Online Platforms for Teaching by LIS Educators in Universities in Rivers State, Nigeria

  • David-West, Boma Torukwein
    • International Journal of Knowledge Content Development & Technology
    • /
    • 제12권4호
    • /
    • pp.105-117
    • /
    • 2022
  • The study investigated digital literacy skills and utilization of online platforms for teaching by LIS educators in universities in Rivers State, Nigeria. The study was undertaken as a descriptive survey design. Three research questions and three hypotheses guided this study. The population of the study was twenty-six Lecturers from the three universities in Rivers State where library and information science are offered. The twenty-six constitute the sample size. Census sampling technique was adopted for the study. The instrument titled Digital Literacy Skills and Utilization of Online Platform for Teaching Questionnaire (DLSOPUQ) was used to elicit information from the respondents. Twenty-six copies of the questionnaire were administered and retrieved. Mean (${\bar{x}}$) was used to analyze the research questions and the null hypotheses was tested with t-test at 0.05 level of significance. The study revealed that there is no significant difference between digital literacy and utilization of online platforms for teaching by LIS educators in universities in Rivers State. Further findings revealed that LIS educators do not have the necessary skills to navigate the online environment for teaching without assistance. In conclusion LIS educators should be innovative and update their skills to meet up with global practice. It was recommended among others that LIS educators should be trained and retrained by the university management to cope with online teaching and provision of the right infrastructure by governments for effectives teaching and learning process.

디지털전관방송시스템을 위한 오디오믹서의 직관적인 사용자 인터페이스 및 제어 소프트웨어 개발 (The development of Intuitive User Interface and Control Software for Audio Mixer in Digital PA System)

  • 김관웅;조주필
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권3호
    • /
    • pp.307-312
    • /
    • 2018
  • 본 논문에서는 디지털 전관방송용 제어기를 구동시키기 위한 직관적인 사용자 인터페이스 소프트웨어의 구현 결과와 오디오믹서 제어 부분에 대한 성능을 확인할 수 있다. 개발된 사용자 인터페이스 소프트웨어는 디지털 하이브리드 믹서의 유지관리 및 제어기능을 제공한다. 통합제어서버에 탑재되어 오디오 믹서인 TAD-168M의 음향상태등을 제어하고 전관방송 통합시스템에 대한 단말기의 상태를 모니터링할 수 있다. 또한, 통합관리까지 가능한 프로그램 소프트웨어로써 향후 지속적인 업그레이드가 가능하다. 개발된 소프트웨어는 이더넷으로 TAD-168M과 연결되고 운영 PC와의 통신을 위해 PC의 랜포트와 TAD-168M의 후면에 위치한 4 포트 스위치에 랜케이블로 연결된다. 기존에 없었던 개발 시스템을 통해 방송시스템에 대한 시스템 관리, 음향제어, 상향방송 제어의 통합제어가 가능하게 되었다.

BLDC 전동기를 이용하는 직동력(PBW) 구동시스템의 제어기 및 구동기 설계 (Design of a DSP Controller and Driver for the Power-by-wire(PBW) System Using BLDC Servo Motor)

  • 주재훈;구본민;김진애;조대성;최중경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 추계종합학술대회
    • /
    • pp.897-900
    • /
    • 2007
  • 본 논문은 BLDC 서보모터를 사용하는 power-by-wire(PBW) 시스템을 위한 DSP 제어기와 IGBT 인버터 드라이버를 설계하는 연구를 제안한다. 이 BLDC 서보모터 시스템은 DSP(Digital Signal Processor)와 IGBT 인버터 모듈로써 구현되어진다. PBW 시스템은 직선 추력 동작을 위해 서보 모터의 속도 제어가 필요하다. 본 논문에서는 벡터 제어와 min-max PWM 기술로 이러한 서보 제어기를 구현한다. 제어기의 CPU로써, TMS320F2812 DSP는 PWM(펄스폭변조) 파형발생기, A/D변환기, SPI(직병렬인터페이스) 포트 그리고 많은 입/출력 포트 등을 가지고 있기 때문에 채택되었다.

  • PDF

지그비 기반 심전계의 데이터 전송률과 소비 전력 분석 (Analysis of Data Transmission Rate and Power Consumption in Zigbee Based Electrocardiography)

  • 김남진;홍주현;이태수
    • 한국콘텐츠학회논문지
    • /
    • 제6권12호
    • /
    • pp.96-104
    • /
    • 2006
  • 본 연구에서는, 심전도 송수신 장치의 개발을 위한 지그비(Zigbee) 기반 무선 센서 모듈과 PDA(Personal Digital Assistant)의 데이터 전송률과 전력 소비에 대하여 분석 하였다. 데이터 전송률은 패킷(Packet) 구조에 의존적이며, 패킷을 2개의 심전도 데이터와 1개의 3축 가속도 벡터로 구성하였을 때, 초당 300 샘플의 전송률을 나타내었다. 두 개의 AAA 전지를 직렬로 연결하여, 센서 모듈의 동작 시간은 평균적으로 28시간 이었다. PDA의 전력 소비는 화면의 ON/OFF 여부와 시리얼 포트의 사용 여부 및 패턴에 의존적임을 알 수 있었다. 이러한 응용에서, PDA 동작 시간은 평균적으로 5시간 정도임을 확인하였으며, 이때, PDA는 논 블로킹 모드로 시리얼 포트로부터 전송된 데이터를 수신 한다. 결론적으로, 본 연구에서 개발된 장치를 24 시간 홀터(Holter) 심전계로 응용할 경우, 센서 모듈의 전력 소비와 전송 속도에는 문제가 없었으나, PDA는 전력 소모율에 문제가 있으며 이는 해결되어야할 과제이다.

  • PDF

측정방법에 따른 흡기포트 분사식 다공 가솔린인젝터의 분무각 비교 (Comparison of Spray Angles of Multihole Port Fuel Gasoline Injector with Different Measuring Methods)

  • 김재호;임정현;노수영;문병수
    • 한국분무공학회지
    • /
    • 제5권3호
    • /
    • pp.17-26
    • /
    • 2000
  • The main parameter commonly used to evaluate spray distribution is spray angle. Spray angle is important because it influences the axial and radial distribution of the fuel. Spray angles were measured and compared for the two non-air assisted injectors such as 2hole-2stream 4hole-1stream injectors used for port fuel injection gasoline engines with n-heptane as a fuel by three different measuring techniques, i.e., digital image processing, shadowgraphy, and spray patternator, respectively. Fuel was injected with the injection pressures of 0.2-0.35 MPa into the room temperature and atmospheric pressure environment. In digital image processing approach, the selection of the transmittance level is critical to obtain the edge of spray and hence to measure the spray angle. From the measurement results by the shadowgraphy technique, it is dear that the spray angle is varied during the spray injection period. The measurement results from spray patternator show that the different spray angles exist in different region. Spray angle increases with the increase in the injection pressure. it is suggested that the spray angle and stream separated angle should be specified when spray is characterized for 2hole-2stream injector, because spray angle is much different though stream separated angle is same. It was also considerably affected by the measurement techniques introduced in this experimental work. However, the optimal axial distance for measuring the spray angle seems to be at least 60-80 mm from the injector tip for two non-air assisted injectors.

  • PDF

Application of S-100 Standard in the field of e-Navigation

  • Oh, Se-Woong;Kim, Ho-Yoon;Suh, Sang-Hyun;Kim, Sun-Young
    • 한국항해항만학회지
    • /
    • 제36권2호
    • /
    • pp.105-112
    • /
    • 2012
  • In order to improve the existing S-57 standard, International Hydrographic Organization(IHO) has developed S-100 standard, a Universal Hydrographic Data Model(UHDM) expanded from ISO 19100 series standard to hydrographic area, and is in the process of its implementation. International Maritime Organization(IMO) has established CMDS based on e-Navigation strategy data standard as International Association of Lighthouse Authorities(IALA) established IHDM based on aids to navigation data standard and each data standard is linked with the S-100 standard. Fundamental concept and core principles of S-100 standard is suitable not only for the development of a wide range of hydrographic data and service production standard, including the next generation ENC, but also the development of product specification of non-hydrographic area. This study has examined the operation principle of S-100 standard and analyzed its implementation process as e-Navigation data in relation with ENC. It also noted the utilization of S-100 standard based e-Navigation and its potential effect via examining the development cases of S-100 standard-based product specification, such as nautical publication, ship reporting and pilot request, digital routing guide, tide and water level transmission and other important data cases of e-Navigation field.

어업의 선진화를 위한 디지털 어업통신망에 대한 연구 (A Study on the Digital Fishery Network for Advancing of Fishery for Wireless Data Communication Using SSB)

  • 김정년;노창균;조학현
    • 한국항해항만학회지
    • /
    • 제27권4호
    • /
    • pp.431-436
    • /
    • 2003
  • 국제적으로는 한ㆍ일, 한ㆍ중 어업협정의 체결로 인한 주변국과의 어업협상력 제고 및 국내적으로는 IMF 체제를 겪으면서 어업경영에 있어서 어업의 존폐위기를 몰고오는등 국내외 사정이 무엇인가 일대 혁신을 요구하는 새로운 대안을 모색하는 단계에 이르렀다. 해양수산부에서는 어업분양의 선진화를 위하여 어로활동의 현황파악 및 문제점을 실시간으로 분석하는 어업정보화의 발전방향을 설정하여 해양자원관리 및 활용성 제고를 통한 종합적이고 체계적인 정보화 기반을 조성하고 있다. 어업통신의 정보화는 전선화되는 자료가 원격지 여부에 관계없이 필요한 사용자에게 공유될 수 있는 환경을 구축하는 것으로 전산화-정보통신망-이용자 서비스까지를 종합적으로 고려하여 구축하여양 한다. 해상이동체인 어선들을 상대로 정보통신망을 구성하기 위한 최적의 방안으로 기존의 SSB 통신시스템을 이용하는 방법을 연구하였다. 본 연구에서는 운용비의 부담이 없는 HF SSB통신에 의한 어선의 어업통신망의 구축을 위하여 어업정보화의 환경, 디지털 어업정보 통신망의 구성 및 무선모뎀에 대하여 제안하였다.