• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.153-160
• /
• 2009

Purpose: The heterodigital or homodigital artery island flap is a popular method of reconstruction for finger defects. Sometimes, digital artery island flap has some disadvantages such as postoperative flap edema, congestion, and partial necrosis of the flap margin. However, we could decrease these disadvantages by means of venous superdrainage. The aim of this study is to report usefulness and postoperative results of venous supercharging digital artery island flaps for finger reconstruction. Methods: From March of 2005 to March of 2008, a total of eight patients with soft tissue defects of the finger underwent venous supercharging digital island flap transfer. Briefly, the flap is harvested along with dorsal vein that is then anastomosed to a recipient vein in an end - to - end fashion, after flap transfer and insetting. Using this technique, eight patients were operated on, ranging in age 23 to 52 years. Results: All the flaps survived with a success rate of 100 percent, thus fully satisfying the reconstructive requirements. No postoperative flap congestion was recognized, obviating the need to take any measures for venous engorgement, such as suture removal. Among 8 cases, it was possible to make an long - term and follow - up observation more than 6 months. In these cases, the fact that light touches and temperature sensations can be detected in all the flaps. Cold intolerance and hyperesthesia were not seen in our series. Conclusion: Providing good harmony with conventional methods and microsurgery, inclusion of a vein with the heterodigital and homodigital artery island flap allows a more reliable and safer reconstructive choice for finger defects. The venous supercharged island flap is a reliable flap with a consistent arterial structure, and with its augmented venous drainage, it is more reliable, providing single - stage reconstruction of adjacent finger defects, including the fingertip.

• Archives of design research
• /
• v.17 no.1
• /
• pp.289-298
• /
• 2004

With the advance of digital technology, development of exclusive CAD system for fashion textile that may suggest the future of fashion textile industry is increasingly accelerated. To build up the foundation of digital culture, it is required for fashion textile industry to develop goods with high value added and make rapid change of production system, and actually, exclusive programs are being developed to meet with the desire. Present study considers the vicissitude of fashion textile and the composition and characteristics of design system, and compares and analyses a variety of design developments of digital fashion textile. And it systemizes the expansion and change of creative digital pattern designs that are developed differing from existing graphic program, the expression of suitable textile texture, and the simulation effect by three-dimension modeling. By separating the usage of CAD system for fashion textile into designing and producing aspects, it also focuses on increasing the usage of exclusive CAD system for fashion textile.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.457-462
• /
• 2021

As South Korea is a mountainous topography, installation of tunnel is essential for construction of expressway in straight lines. According to "2019 Road Bridge and Tunnel Status Report", there are 2,682 tunnels in Korea with total length of 2,077km. Tunnels take up 1.9% of total road length and the number of tunnel increased by 94% with 1,300 newly constructed tunnels over the 10 years. According to domestic and foreign researches, a long tunnel over 1km in expressway has dark lightings and monotonous wall design which decrease driver's concentration and make the driver feel bored. This leads to feeling fatigue and drowsiness more easily. In response, Korea Expressway Corporation installed design lighting that increases attentiveness on 10 tunnels with total length over 3km by 2020. To reduce the risks of accident that may happen inside the tunnel, this study conducted a comparative analysis on characteristics of each type of LED landscape lighting installed inside the expressway tunnel. The study aimed on providing the basic material for effective installation of LED landscape lighting for securing driving stability, reducing fatigue, and lowering the risk of drowsiness.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.269-275
• /
• 2023

In 2021, the 150th anniversary of Proust's birth, and in 2022, the 100th anniversary of his death, the interest in À la recherche du temps perdu increased. We took advantage of a digital humanities approach to make these seven novels known as difficult easily accessible to French literature major korean students. We let the students analyze using the analyzing tools for the big data and find some clues to understand the works through the visualized data. We picked out the main characters and places that appear in his works with Wordcloud, and checked the awareness of Proust in domestic and foreign through the various sites to analyze the big data, such as Big Kinds and Textom. Through the methodology of digital humanities, the students commented that they have gradually enlarged their understanding breadth for Proust's 『In Search of Lost Time』 rather than giving up it as difficult. This study confirmed that applying the big data analysis and digital humanities is an appropriate teaching method in finding ways for the students to broaden the understanding of French literature.

• Journal of radiological science and technology
• /
• v.46 no.5
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.11-20
• /
• 2020

As the manufacturing environment becomes more complex, traditional simulation models alone are having a lot of difficulties in reflecting real-time manufacturing situations. Although the Digital Twin concept is actively discussed as an alternative to overcome theses issues, many studies are being carried out only in the product design phase. This research presents a Digital Twin-based manufacturing environment framework for applying the Digital Twin concept to the manufacturing process. Twin model that is operated in virtual space, physical system and databases describing the actual manufacturing environment, are proposed as detailed components that make up the framework. To check the applicability of proposed framework, a simple Digital Twin-based manufacturing system was simulated in a conveyor system using Arena software and Excel VBA. Experiment results have shown that the twin model is transmitted real time data from the physical system via DB and were operating in the same time unit. The Excel VBA fitted parameters defined by cycle time based on historical data that real-time and training data are being accumulated together. This study proposes operating method of digital twin model through the simple experiment examples. The results lead to the applicability of Digital twin model.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.129-139
• /
• 2022

Analog-based streamers for ultra-high-resolution seismic surveys are capable of additional noise ingress in water, but the specifications cannot be expanded through interconnections. Foreign-produced digital streamers have been introduced and used primarily at domestic research institutes; however, the cost is high and smooth maintenance is challenging. This study investigates the localization of ultra-high-resolution digital streamers capable of high-resolution imaging of a geological structure. A digital streamer capable of 24-bit, 10 kHz digital sampling of up to 64 channel data was developed through research and development. Various quantitative specifications of the system were designed and developed close to the benchmark model, Geometrics' GeoEel streamer, and the number of modules that make up the system was drastically reduced, reducing development costs and making it easier to use. The field applicability of the developed streamer system was evaluated in an in situ experiment conducted in the waters around the Port of Yeong-il Bay in Pohang in April 2022.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2010

This study is about what process and methodology could make UI designer be able to achieve the interface which considers user's mental model through implementing corporate line-up model, when people design an interface between product of multi-function printer and user. The most important concern of UI designers who are dealing with an interface between product and user is how they can make product system image match user's mental model so that users can utilize products without any confusion and discomfort. If concept model which designers bring up and mental model which users expect and recognize could be of one accord, then users can feel ease of use toward products. The understanding and observation for user behavior and use pattern is prerequisite to develop user-centered interface between product and user. However, UI designers do design interface from their own perspective and assumption in many business areas, and users do not react as designers assumed and intended in many cases or examples. This study is to find inappropriate system images against users' mental model on basic function of multi-function printer, and the relationship of system image and user's mental model is diagramed to build up a hypothesis. The hypothesis from this study is validated through evaluation of domestic and international users. In addition, two suggestions to improve usability problems revealed from user test are proposed. The optimal solution is designed based on the result of user evaluation and consideration of many user environments, and then it is implemented to line-up product. In conclusion, this study considers how UI designers can create system image which is close to user's mental model.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.641-649
• /
• 2009

There were many simulation models that made for validation of industrial environment and estimate of efficiency to be constructed. And there will be more simulation models made for same reason, too. Already, there have been a lot of simulation models in industry field and scholar labs. To reuse these simulation models, it is necessary to find common properties and make the high abstract simulation model. Based on this idea, this study shows to define the high abstract simulation model to be able to specialize in need and to make the software framework for connecting the specific simulation model to the abstract model. And it is held up as the example that applying the simulation framework to the Ship Panel Block shop simulation model.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.119-122
• /
• 2007

TRUTEC building, which is located at DMC B block is zone, is just one the office building in Soeul. TRUTEC building is designed by Barkow Leibinger Architeken in Germany, has 5 stories under and 12 stories above and has been finished with the unique three dimensional curtain wall unit. Big trial to make unique elevation succeeded as getting rid of the typical plain curtain wall unit. In addition, aluminum bars are treated by the latest CNC machine in order to achieve 3D section. Construction of curtain wall is highly focused from the moment of contract to keep the schedule because the contract period is 18 months. Regular design meeting and technical meeting between stakeholders including construction manager, designer, engineer, consultant and so on have been held during the construction to minimize the risks from the unique elevation and trial. Step by step mock-up test (design mock-up and visual mock-up on site) has been performed before functional mock-up test.