• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.189-196
• /
• 2012

A floating optical system is a system that moves more than 2 groups to focus at the camera lens. At the camera optics, the floating system that is mainly used is an optical system such as a macro lens which changes magnification very much. When the floating system is assembled and fabricated in the factory, there are differences between the image plane of the sensor and the focal plane of the infinity or macro state. Therefore, in a considerable proportion of cases, the focus adjustment to minimize the difference of BWD(Back Working Distance) is carried out in the process of manufacturing. In this paper, in order to decide the movement of each group in a floating system, we evaluated the rotation angle of CAM for the focus adjustment. We know that the maximum magnification of macro state is corrected by this numerical method for the focus adjustment, too. We investigated the limit of CAM rotation angle of the system by using statistical analysis for CAM rotation angle, which uses the focus adjustment of the floating system with symmetric error factors.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2017

In this paper, we evaluate the basic test results of the 32 Gbps observational equipment introduced as the back-end system for the wideband VLBI (Very Long Baseline Interferometry) observation of KVN (Korean VLBI Network). Radio astronomers want to make a large radio telescope that has excellent performance in order to observe the superfine structure of a celestial body, but a lot of money is needed. Therefore, in order to increase the sensitivity, the performance improvement of the receiving system and the method of observing the wide frequency bandwidth are introduced. To do this, we adopted a wideband sampling method for converting analog signals to digital with ultra-fast speeds and a wideband sampler for performing digital filtering in order to observe a wide observational frequency bandwidth. The wideband sampler (OCTAD-K) supports up to 16 Gsps-2bits sampling and supports a variety of observational bandwidth using digital filtering techniques. In particular, it is designed to support KVN's 4-frequency simultaneous observation system and VERA(VLBI Exploration of Radio Astrometry)'s 2-beam observation system. It can also support polKVN(Korean VLBI Network), KaVA(KVN and VERA Array), 32Gbps Direct Sampler, Digital Filter, Widebandarization observations and supports the standard VDIF(VLBI Data Interchange Format) format of observed data. In this paper, the performance of the system and the problem solving are described in detail after performing the factory inspection and field test before the system is introduced.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.421-426
• /
• 2016

This study suggests a board fence design with a convergence-style mural. The basic structure contains pictorial factors with mural paintings on the fence. It is also equipped with electricity facilities inside the fence itself, so it has not only the unique function of the fence but also the complexity and expandability in order to be used as a garden lighting and security alarm system. All the components meet the standard so they can be manufactured in a factory. Through this design proposal, this study tries to suggest a fence which encourages personal or social communication one another as well as the basic function of the fence. As a result, the fence realizes a broad convergence function of its usefulness for social functioning such as the crime prevention as well as an esthetic function.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.739-747
• /
• 2018

With a large feature space data, feature selection has become an extremely important procedure in the Data Mining process. But the traditional feature selection methods with single process may no longer fit for this procedure. In this paper, we proposed a hybrid efficient feature selection model for high dimensional data. We have applied our model on KNHNAES data set, the result shows that our model outperforms many existing methods in terms of accuracy over than at least 5%.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.109-120
• /
• 2020

The supply chain without digitization is just a series of discrete, siloed steps taken through marketing, product development, manufacturing, and logistics, and finally into the hands of the customer. Digitization brings down those walls, and the chain becomes a completely integrated network fully transparent to all the parties involved. The ulitimate goals of digitizatized supply chain management are velocity and visibility. This network will depend on a number of key technologies including integrated planning and execution systems, supply chain analytics, autonomous logistics, smart warehousing and factory, etc, enabling companies to react to disruptions in the supply chain, and even anticipate them, by fully modeling the network, creating "what-if" scenarios, and adjusting the supply chain in real time as conditions change. This paper presents a number of studies on digitalization of supply chains and provides a discussion on issues raised in the process of technology adoption. Implications of the study findings are also provided.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.101-110
• /
• 2012

In recent days, lots of social commerce newly emerged business types of e-commerces are on the basis of social network. Therefore social commerce with social network might be powerful communication channel among customers and has suggested new paradigm in transaction model on the internet. In general, major roles of social commerce sites are to promote transaction with high discount rate and/or lots of event and to activate markets of local area. As characteristics of social commerce such as dynamic, rapid, and open, this research was assumed that design factors of sites that are different from existing e-commerce sites might be influential elements in decision making of purchase. This research is to empirically investigate which factors affect purchase decision making behaviors for 20s respondents who are major users of social commerce services. As a result major factor, easy-to-use, affecting decision making factors was identified and this result can give implication to researchers and persons in charge of fields who have interests in commerce site design and upgrade.

• Journal of Urban Science
• /
• v.6 no.2
• /
• pp.17-27
• /
• 2017

Recently, civil complaints have increased due to water pollution and bad smell in rivers. Therefore, attention is focused on improving the river environment. The purpose of this study is to acquire RGB and thermal infrared images using UAV for sewage outlet and to monitor the status of stream pollution and the applicability UAV based images for river embankment maintenance plan was examined. The accuracy of the 3D model was examination by SfM(Structure from Motion) based images analysis on river embankment maintenance area. Especially, The wastewater discharged from the factory near the river was detected as an thermal infrared images and the flow of wastewater was monitored. As a result of the study, we could monitor the cause and flows of wastewater pollution by detecting temperature change caused by wastewater inflow using UAV images. In addition, UAV based a high precision 3D model (DTM, Digital Topographic Map, Orthophoto Mosaic) was produced to obtain precise DSM(Digital Surface Model) and vegetation cover information for river embankment maintenance.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.219-226
• /
• 2016

The aim of this study is to suggest the strategic implications for manufacturing 3.0 in Korea by reviewing an innovation approaches of German that is a source of manufacturing innovation in Europe. Today, growth potential of korean economy has been weakened by the rise of emerging economies. Furthermore, technological advantage of emerging economies has been strengthened. In this situation, Korea needs to make efforts to enhance global competitiveness. The growth of developing countries provides a new opportunities for Korea for export demand. However, this situation can be recognized as threats for Korea because Korea has to compete with those countries to expand market share. In this regard, reviewing the approaches of manufacturing innovation in German is important because German keeps remaining a high levels of competitiveness in spite of a rise of emerging economies and European recession. To do this, this research can give hints to advance the industrial policy improvements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1673-1678
• /
• 2019

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Industrial Engineering and Management Systems
• /
• v.11 no.2
• /
• pp.188-195
• /
• 2012

This paper presents a new mode of expressing a 3D assembly work for creating a 3D CG animation without judgment by human from minimal required information. In the field of manufacturing, there are favorable movements in the utilization of 3D CAD for 3D simulation to shorten lead time for product development and pre-production. But simulating an assembly work has troubles to need huge quantity of manually input data. This paper discusses what minimal necessary information for creating 3D CG animations of assembly works is, focusing on the features of assembly works. Furthermore, a new mode of expressing a 3D assembly work is proposed as "state/change transition diagrams" (SCTD), which express arbitrary scenes in an assembly work as "state" and describe a sequential assembly work with "state" and "change", and the outline of its stepwise generation algorithm is also described. SCTD can be converted to a 3D CG animation of an assembly work without judgment by human. This paper focuses on the creating 3D CG animation of assembly works which workers use only their both hands.