• 한국IT서비스학회:학술대회논문집
• /
• 2006.05a
• /
• pp.393-400
• /
• 2006

An autonomic system management technology is being developed for self-managing during deployment and on an on-going basis for a production environment so that the system may be deployed and managed in production with minimal human intervention. As networks and distributed systems grow and change, system deployment failures, hardware and software issues, and human error can increasingly hamper the performance and capacity of the components in an IT system, driving up overall costs-even as technology component costs continue to decline. Known as the only solution for an on demand IT environment, the architecture of the autonomic system management will be shown and also the corresponding standards on the way will be introduced in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.48-58
• /
• 2023

This paper presents the digital control techniques of a bidirectional CRM(critical-conduction mode) buck(boost) converter, a dead-time design method that optimizes ZVS(zero-voltage switching) and valley-switching operation, and a switching-frequency limitation that ensures stable converter operation. To verify the feasibility of the design, a Si-MOSFET-based bidirectional CRM buck(boost) converter is built with 260-430 V input, 160-240 V output, and 1.0 kW rated capacity. The bidirectional CRM converter achieves an efficiency of up to 99.6% at buck mode and 98.7% at boost mode under rated load conditions.

• Steel and Composite Structures
• /
• v.51 no.5
• /
• pp.487-498
• /
• 2024

Steel moment resisting frames (MRFs) typically have inter-story drift concentrations at lower stories during earthquakes as found from previous research. Hinged walls (HWs) can be used as structural strengthening components to force the MRFs deform uniformly along the building height. However, large moment demands are often observed on HWs and make the design of HWs non-economical. This paper proposes a method to reduce the moment demand on HWs using a ductile connection system between the MRFs and the HWs. The ductile connection system is designed with a yield strength and energy dissipation capacity, for the purpose of limiting the seismic forces transferred to the HWs and dissipating seismic energy. Nonlinear time history analyses were performed using 10 far-filed earthquakes at maximum considered earthquake level. The analysis results show that the proposed ductile connection system can reduce: (1) seismic moment demands in the HWs; (2) floor accelerations; (3) the connection force between HWs and MRFs.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.303-309
• /
• 2021

This study examines the effects of CBDC(Central Bank Digital Currency) on the Korean economy in the digital currency era and discusses the response strategies for CBDC. With the review of the definition and the development status of digital currency, we explore the characteristics and current status of CBDC in Korea as well as the possibility for internationalization of CBDC. The result shows that CBDC can reduce credit risk, improve transaction transparency compared to cash, and increases monetary policy capacity. Meanwhile, the credit and intermediary function of financial institutions may be weakened, and side effects such as financial alienation may occur. Nevertheless, as the issuance of CBDC is an important opportunity to enhance the possibility of internationalization of Korean Won, preemptive measures are required to keep pace with the competition and cooperation with each country toward the digital key currency. We need to accelerate the digital financial environment through Korea's comparative advantage, and develop a strategy to achieve the internationalization of the financial industry and the Korean Won through CBDC issuance. From the early stage of CBDC designing, it is necessary to achieve international agreements through cooperation with other central banks and to develop policies suitable for the transition to digital currency.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.159-172
• /
• 2012

In the recent, due to explosion of Digital Universe, the performance of computer and storage system is reducing. Therefore, the upgrade and capacity expansion needs is growing. Countermeasure for this problem is required fundamental and long-term solutions rather than piecemeal expansion. In this paper, we establish a data management policy for an enterprise through the operational status of storage system and the analysis of data value of it, and implement ILM-based tiered storage system on the basis of these. The results of this study shows the overall throughput was improved about 21% compared to the existing system, it is very effective to maintain continuous quality and reduce operating costs in the long term aspect.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.100-102
• /
• 2003

This system is capable of obtaining quantitative information from images using natural features on the ortho-image maps that correspond with those from topographical maps. However, the qualitative information can also be obtained because because of the excellent visibility of ortho-image maps. There are plenty of promise for the use of ortho-image maps in the next generation topographic technology because of its wider applicability within the field. In keeping with the cutting edge, we produced ortho-image maps by scanning a specified area in narrow sections using the PKNU 2: a multispectral digital aerial photographing system made by ourselves. We evaluated the precision of the ortho-image maps, and performed an evaluation of the PKNU 2 system's capacity to improve the equipment of the PKNU 2. Ortho-image maps were made using Ground Control Points (GCPs) which were obtained from digital maps and aerial photographs of the PKNU 2. Thus, we demonstrated that it was possible to produce the ortho-image maps, which has a good constant level rate of less than 1m. The PKNU 2 system needs to be improving in the sensitivity of level maintenance equipment in the evaluation in terms of performance. It is thus required to survey the GCPs precisely for an accurate study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.333-339
• /
• 2012

Global flow of communication is a trend of high speed, digitalization, and high-capacity. Furthermore, spread spectrum method has been dominantly utilized to efficiently use the frequency which is the scarce resource. The PLL (Phase Lock Loop) which is a widely used frequency synthesizer in communication systems has few problems such as status interferences and hence, this study utilized the DDS (Direct Digital Synthesis) which is a digital device that can minimize the problems of PLL for the study on the performance evaluation of high speed frequency hopping system design. We designed a system that practices high speed frequency hopping and interprets improvement of error-rates and evaluated its performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2003

The close-range photogrammetry is a surveying technique the acquiring the 3D object from 2D geometric appearance shown in the image. Camera treatment is relatively so simple. Camera position refer to the object can be freely adjusted by locating the exposure station at any site. So it is used effectively on a small area or object for survey. In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in sub-pixel degree thorough digital close-range photogrammetry with bundle adjustment for local terrain model generation.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3333-3340
• /
• 2000

Recently, Requnremeni for video data have been increased rapidly by high progress of both hardware and cornpression technique. Because digital video data are unformed and mass capacity, it needs various retrieval techniquesjust as contednt-based rehieval Superimposed-caption ina digital video can help us to analyze the video story easier and be used as indexing information for many retrieval techniques In this research we propose a new method that segments the caption as analyzing texture eature of caption regions in each video frame, and that extracts the accurate scope of superimposed-caption frame and its key regions and color by measunng cominuity of caption regions between frames

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.55-60
• /
• 2007

This paper proposes a hydraulic pump system that uses a variable speed SR drive and constant capacity pump. For the design of the SRM (Switched Reluctance Motor) and digital controller, base speed and rating torque are determined from the mechanical specifications of the hydraulic pump. In order to minimize the power consumption during the maintaining of preset oil-pressure, the pressure control system changes the maximum oil-pressure band and flow rate according to the motor speed. The DSP control system adjusts the oil-pressure and the speed of the SRM from the pressure sensor signal, due to conservation of power consumption by the hydraulic pump. A 2.2Kw, 12/8 pole SR motor and DSP based digital controller are designed and tested with experimental set-up. The test results indicate that the system has some good features such as high efficiency and rapid response characteristics.