• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.786-791
• /
• 2009

Recently, digital camera module has been extensively utilized in mobile devices. The digital camera module should be smaller and lighter than digital still camera module to be used in mobile device. But, mobile camera can't get high quality image as good as the one of digital still camera due to the optical limitation of minimized module. Especially, AE system of mobile camera occurs excessive hunting and oscillation due to miniaturization of module. In this paper, improved AE algorithm which is applied fuzzy PI control is suggested to compensate this point.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.791-793
• /
• 2006

In the satellite camera, the incoming light source is converted to electronic analog signals by the electronic component for example CCD (Charge Coupled Device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the video processor (A/Ds). The outputs of the A/Ds are digitally multiplexed and driven out using differential line drivers (two pairs of wires) for cross strap requirement. The MSC (Multi-Spectral Camera) in the KOMPSAT-2 which is a LEO spacecraft will be used to generate observation imagery data in two main channels. The MSC is to obtain data for high-resolution images by converting incoming light from the earth into digital stream of pixel data. The video data outputs are then MUXd, converted to 8 bit bytes, serialized and transmitted to the NUC (Non-Uniformity Correction) module by the Hotlink data transmitter. In this paper, the video data streams, the video data format, and the image data processing routine for satellite camera are described in terms of satellite camera control hardware. The advanced satellite with very high resolution requires faster and more complex image data chain than this algorithm. So, the effective change of the used image data chain and the fast video data transmission method are discussed in this paper

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 만화애니메이션 연구
• /
• 통권33호
• /
• pp.425-447
• /
• 2013

디지털 카메라의 대중화로 인하여 ISP(Image Signal Process)에 관한 연구들이 활발히 일어나고 있으며 이와 함께 사용자들이 쉽게 사용할 수 있는 이미지 보정 어플리케이션들도 많이 개발되고 있다. 특히 AWB(Automatic White Balance) 와 Auto Exposure 는 ISP 기능 중에서도 가장 관심을 받는 분야로서 이미지나 영상의 질을 높이는데 많은 기여를 하고 있다. 3D 프로그램에서 라이팅과 카메라의 원리는 실제 카메라와 라이팅의 원리를 적용하여 만들어졌으나, 실제의 카메라에서 사용되고 있는 자동노출 기능과 AWB 기능들과 같은 전문적인 기능들은 3D 프로그램 상에서 구현되지 못하고 있다. 영상에서 색상의 보정은 색상에 대한 전문적인 지식이 있어야 가능하며, 합성프로그램에서 제공하는 기능들은 일반적인 디지털 사진을 보정하는 프로그램 방식에 비하여 복잡한 것이 사실이다. 특히 애니메이션을 공부하는 대학생들의 경우에는 애니메이션의 제작과정에 있어서 색상보정의 과정을 생략하고 렌더링과 합성과정을 거쳐서 애니메이션을 완성하고 있다. 따라서 본 연구는 색상보정에 사용하는 기능들을 3D 애니메이션제작 실사에서 적용 가능하게 함으로서 색상에 대한 전문적인 지식이 없는 사람이라도 쉽게 색상을 보정하여 렌더 이미지의 퀼리티를 높이는 3D 제작 파이프라인을 본 연구를 통하여 제시하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제22권5호
• /
• pp.21-28
• /
• 2017

As technology related to digital imaging equipment is developed and generalized, digital imaging system is used for various purposes in fields of society. The object tracking technology from digital image data in real time is one of the core technologies required in various fields such as security system and robot system. Among the existing object tracking technologies, cam shift technology is a technique of tracking an object using color information of an object. Recently, digital image data using infrared camera functions are widely used due to various demands of digital image equipment. However, the existing cam shift method can not track objects in image data without color information. Our proposed tracking algorithm tracks the object by analyzing the color if valid color information exists in the digital image data, otherwise it generates the lightness feature information and tracks the object through it. The brightness feature information is generated from the ratio information of the width and the height of the area divided by the brightness. Experimental results shows that our tracking algorithm can track objects in real time not only in general image data including color information but also in image data captured by an infrared camera.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.27-30
• /
• 2003

In this paper a new approach of digitalized ‘Takbon’ is introduced. By image signal processing, the letters which were written on stones can be deciphered. Epigraphic letter is detected by digital image device, digital camera. The two dimensional digital image is preprocessed because of sensor noise and detective turbulence. Color image is transformed into grey level. The letter image is analyzed in time/frequency domain. By the resultant analysis data decisive functions are calculated. Signal Processing techniques, such as scaling, clipping, digital negative, high/low filter, morphology and so on, provide algorithms that can extract letter from stones.

• 한국광학회지
• /
• 제15권2호
• /
• pp.183-189
• /
• 2004

고화질 디지털 카메라가 널리 보급되면서 디지털 카메라는 단순한 영상 기록 장치가 아닌 정보 저장 매체로써 다양한 분야에서 사용되고 있다. 그러나 디지털 카메라의 분광 감도가 표준 관측자의 색 일치 함수와 다르기 때문에 카메라로는 색이 정확하게 측정될 수 없다. 본 연구는 카메라 이미지를 피사체의 색 정보를 지니고 있는 sRGB 이미지로 변환하는 방법에 관한 것이다. 디지털 카메라의 출력 신호와 CIE 삼자극치간의 변환 행렬은 Macbeth ColorChecker 24색을 기준 색으로 하여 다중 회귀법을 사용하여 구하였다. 변환 행렬을 이용하여 카메라의 출력 신호로부터 피사체의 실제 색을 찾아내어 이상적인 sRGB 표준 모니터에 정확하게 나타낼 수 있는 RGB 데이터로 변환하였다. Kodak DC220 디지털 카메라로 생성된 Macbeth ColorChecker의 sRGB 이미지와 실제 색과의 평균 색차는 2.1 $\Delta$ $E_{ab}$ $^{*}$ 시험 색표로 사용된 IT8 Reference KIT(286색)의 sRGB 이미지와 실제 색과의 평균 색차는 4.6 $\Delta$ $E_{ab}$ $^{*}$ 로 계산되었다. ab/$^{*}$ 로 계산되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.349-354
• /
• 1999

Electro-Optical Camera (EOC) is the main payload of the KOMPSAT-1 satellite to perform the mission of cartography that builds up a digital map of Korean territory including a digital terrain elevation map. This paper discusses the issues of the digital image simulation of EOC for the generation of EOC simulated scene as taken by EOC at 685km altitude on orbit. For the purpose, simulation work has been performed with the sensor models of EOC and the satellite platform motions models through image chain analysis from the illumination source (Sun) to a simulated image output in digital number. MODTRAN fur radiance calculation, MTF models of optics, detector and motions of EOC for system point spread function (PSF), and signal chain equations for digital number output are described. Several noise models of EOC are also considered. The final output is the EOC simulated image in digital number. The simulation technique can be used in several phase of a spaceborne electro-optical system development project, feasibility study phase, design, manufacturing, test phases, ground image processing phases, and so on.

• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.99-109
• /
• 2013

In this paper, we propose a new system which captures real depth and color information from natural scene and implemented it. Based on it, we produced stereo and multiview images for 3-dimensional stereoscopic contents and introduced the production of a digital hologram which is considered to the next-generation image. The system consists of both a camera system for capturing images which correspond to RGB and depth images and softwares (SWs) for various image processings which consist of pre-processing such as rectification and calibration, 3D warping, and computer generated hologram (CGH). The camera system use a vertical rig with two paris of depth and RGB camera and a specially manufactured cold mirror which has the different transmittance according to wavelength for obtaining images with the same view point. The wavelength of our mirror is about 850nm. Each algorithm was implemented using C and C++ and the implemented system can be operated in real-time.

• 한국작물학회지
• /
• 제49권1호
• /
• pp.41-45
• /
• 2004

We have developed and tested a new method for nondestructive estimation of chlorophyll- and nitrogen-contents in rye leaf. It was found that the relation-ships among nitrogen, chlorophyll content and fresh weight were significantly positive correlated. Nitrogen and chlorophyll content were positively correlated whereas correlation coefficients among R, G, R-B and G-B on the basis of photo-numerical values were negative. We have found that R/(R-B) obtained from data of digital camera is the best criterion to estimate the chlorophyll content of leaves. The regression curves of the relation between R/(R-B) and chlorophyll content were also calculated from the data collected on cloudy days. The coefficients of determination ($\textrm{r}^2$) were ranged from 0.33 to 0.99. In this study, the accuracy in estimating chlorophyll content from the color data of digital camera image could be improved by correcting with R, G, and B values. It is suggested that, for practical purposes, the image values estimated with sufficient accuracy using a portable digital camera can be applied for determining chlorophyll content and nitrogen status in plant leaves.