• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.415-420
• /
• 1990

To prevent red pepper from post harvest decay and to reduce the labor and drying expenses, the red pepper paste was directly prepared from fresh red pepper. The characteristics of red pepper paste and processing properties were investigated, and the effect of salt and heat on product quality during processing and storage were studied. After the processed red pepper paste was stored at room temperature, $5^{\circ}C\;and\;-3^{\circ}C$ without light for 6 months, kimchi was prepared with the stored red pepper paste to evaluate any quality change. The weight and pH of pericarp were 73.2% of total and 5.0, respectively. Addition of 10% salt to the paste decreased the pH of paste, reducing the sterilization time down to 10 min against growth of Clostridium botulinum. Thermal diffusivity of paste after pasteurization was $1.190{\times}10cm^{-7}/sec$, which was lower than control, probably due to air in pouch. The red pepper paste with 10% salt added, followed by sterilization for 10 min, could be preserved for over 6 months at $5^{\circ}C$.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.63-65
• /
• 2008

The increased interest in reducing the environmental effects caused by releasing organic compounds and aqueous waste has motivated the development of polymeric materials in supercritical fluids. Recently, supercritical fluids have been used in material synthesis and processing because of their special properties, such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive because it is non-toxic, non-flammable, and has moderate critical temperature and critical pressure values. Supercritical carbon dioxide can also swell most polymers. In this study, we prepared polymer/clay nanocomposites using supercritical fluids. Cloisites 10A, 15A, 25A, and 30B used in this study are montmorillonites modified with a quaternary ammonium salt. The nanocomposites of polymer/clay were characterized by X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.794-801
• /
• 2003

As it is important to measure the degree of the deterioration and predict service life caused by chloride in concrete structure the methods of measuring chloride in the concrete is raised important problems. This study is to set a new standard for using of the colorimetric method through grasping the character of the colorimetric distinction method, and measuring the chloride content at the place discolored. Also, to predict chloride content around embeded bar and time reaching limit chloride concentration through measuring the chloride content of concrete surface by colorimetric distinction method and this study presents the new concept of concrete degradation and diagnosis of the durability by salt damage. According the results, it is possible to use colorimetric distinction method as simplified measurement to measure the fixed quantity of the chloride concentration. What is more, it would make calculation of concrete surface chloride had a wide fluctuation at the general environment extended. Also, it would be make estimating durability of reinforced concrete structures applied to the basic data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.222-225
• /
• 1993

To obtain a thermal diffusivity predicting equation for meat products, minced pork meat was mixed with some additives such as lard, isolated soybean protein, 1.5% of table salt and 2% of polyphosphate to control the composition and texture of the products and then stuffed in a model can. Heat penetration curves were measured in the temperature range of 80.76~121.03$^{\circ}C$ by using a thermocouple fixed at the cold point of the model can and the thermal diffusivities were calculated from the plotted heat penetration curves. At constant heating temperature, the thermal diffusivities of pork meat with water content of 49.01~77.55% increased linearly with increasing water content. The thermal diffusivities of the products with constant water content also increased linearly with increasing heating temperature and the values could be predicted by following equation: $\alpha$p=(2.1394+0.5X$_{w}$).$\alpha$$_{w}$+0.0035.10$^{-6}$ .X$_{w}$-0.2785.10$^{-6}$ ,(m$^2$.s$^{-1}$ ). The maximal difference of the values predicted with this equation on the basis of the practical measured values were less than 1.7%. 1.7%.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.490-494
• /
• 2019

Experimental studies to investigate the behaviors of hydrogen in molten FLiNaK (LiF-NaF-KF) have been conducted at $500-700^{\circ}C$. On the basis of previous studies, the diffusivity and solubility of hydrogen in FLiNaK have been revised, and the expressions can be correlated to the following Arrhenius equations: $D_{H2}=1.62{\times}10^{-5}{\exp}(-48.20{\times}10^3/Rg{\cdot}T) m^2/s]$ and $S_{H2}=1.03{\times}10^{-4}{\exp}(-14.96{\times}10^3/Rg{\cdot}T) [mol-H_2/m^3/Pa]$, respectively. The behavior characteristics of deuterium in FLiNaK were studied and compared with the hydrogen behaviors in FLiNaK. The results showed the behaviors of deuterium were consistence with the behaviors of hydrogen in FLiNaK. The difference between hydrogen and deuterium has not been observed upon the experimental research of the behavior characteristics of hydrogen and deuterium in FLiNaK, which suggested the results obtained here might apply equally to the behavior characteristics of tritium in FLiNaK.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.391-396
• /
• 2006

When radioactive wastewater was solidified treatment by cement, the drying rate of cement and the volume reduction ratio was decreased because of boric acid component in the wastewater. In order to supplement the demerit, effects of paraffin wax investigated in this study. Paraffin wax has a hydrophobic properties and a low affinity with inorganic materials. When the radioactive wastewater was tested by a small of wax, the compressive strength of solidified waste are decreased Therefore boric acid in radioactive wastewater are first treated by alkali salt and coated by the stearic acid. During the solidification step, The amount of paraffin wax addition get the result that the compressive strength of solidification with cement was the same as that with paraffin wax. The leaching properties of radioactive waste solidified was the same CFL (cumulative fraction leached), PR (penetration rate), effective diffusivity if paraffin wax content in solidified waste was 20% or 25%.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.672-676
• /
• 2015

Spherical phospholipid bilayers, vesicles, were formed with respect to phase of each layer via a double emulsion technique. The conversion of phosphatidylcholine (PC) to phosphatidic acid (PA) at the outer layer, caused by phospholipase D (PLD), induced a curvature change in the vesicles, which eventually led them to fuse each other. The effect of the lipid layer physical-properties on the PLD-induced vesicle fusion was investigated using the fluorescence intensity change. 8-Aminonaphthalene-1,3,6-trisulfonic acid disodium salt(ANTS) and p-Xylene-bis(N-pyridinium bromide)(DPX) were encapsulated in the vesicles, respectively, for the quantification of the fusion. The fluorescence scale was calibrated with the fluorescence of a 1/1 mixture of ANTS and DPX vesicles in NaCl buffer taken as 100% fluorescence (0% fusion) and the vesicles containing both ANTS and DPX as 0% fluorescence (100% fusion), considering the leakage into the medium studied directly in a separate experiment using vesicles containing both ANTS and DPX. It was observed that the fusion occurred to the liquid-phase of the inner layer only. The fusion behaviors were very similar for both solid and liquid of the outer layer. However, the leakage was faster for the solid-phase outer-layer than the liquid-phase outer-layer. The difference in the leakage seems to be caused by the lipid concentration and the lateral diffusivity in the layer.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.213-221
• /
• 2011

Using poly(ethylene oxide) (PEO) as a polymer host, poly(ethylene glycol) (PEG) as a plasticizer, potassium iodide and iodine as sources of $I^-/I_3^-$, polymer electrolyte membranes were prepared. Based on the polymer electrolytes, solid-state dye-sensitized solar cell (DSSC)s were fabricated. The content of PEG in the electrolyte was controlled to be 95%. The mole number of KI per 1 mole of EO ([KI]/[EO] ratio) in the electrolyte was changed to be 0.022, 0.044, 0.066 and 0.088. The electrolyte membrane showed wax phase in ambient temperature. The ionic conductivity increased with increasing KI content to reach the maximum value at which [KI]/[EO] ratio is 0.066. After the maximum value, the ionic conductivity decreased with increasing KI content. In the case of DSSC, the Voc decreased continuously with increasing KI content in the polymeric electrolyte membrane. The $J_{SC}$ increased with increasing KI content to show maximum value at which [KI]/[EO] ratio is 0.044. In the higher KI content region, $J_{SC}$ value decreased with increasing KI content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.1
• /
• pp.1-8
• /
• 1976

1. Under an asumption that Ficks diffusion equation could be applicable in soil systems, the diffusivities of NaCl in several flooded soil systems were measured to range from $0.4{\times}10^{-5}cm^2sec^{-1}$ to $0.83{\times}10^{-5}cm^2sec^{-1}$ 2. It was discussed that, when a polder soil with a uniform initial salt content through the profile is desalinated only by diffusion to flooding water, the salt content in profile is a function of soil depth, diffusion time, and diffusivity as following $$C=C^{\circ}erf\frac{x}{\sqrt[2]{Dt}}$$ 3. On the basis of Kirkham, et al's integration of complementary erra function, the speed of desalting was discussed to be inversely proportional to the square root of time as following $$dq/dt=C^{\circ}{\sqrt{D/{\pi}t}}$$ 4. It was estimated enough to exchange the flooding water once or twice, even when desalination of polder soil is carried out only by diffusion, if the desalination begins in June, the used flooding water is fresh water, and flooding depth is 10cm. 5. Desalination of polder soil by diffusion requires 2 month for good standing of planted rice.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.1
• /
• pp.26-30
• /
• 1993

To suggest a thermal diffusivity predicting equation for mixed meat products, heat penetration curves of pork products containing filefish meat were plotted in the temperature range of $80.44{\sim}121.03^{\circ}C$, and thermal diffusivities were calculated from the heat penetration curves. The ground pork was mixed with minced filefish meat and some additives such as lard, isolated soy protein, $1.5\%$ of table salt and $2\%$ of polyphosphate to control the composition and texture of products, and then stuffed into a model can. The heat penetration curves were plotted using a thermocouple fixed at the slowest heating point of the can. At constant heating temperature, the thermal diffusivities of the products increased linearly with increasing moisture content. The values of the products with constant moisture content also increased linearly with increasing heating temperature. The thermal diffusivities of the products with moisture content of $51.47{\sim}80.20\%$ could be predicted by following equation: $${\alpha}_p=(3.045+0.59{\cdot}X_w){\cdot}{\alpha}_w+0.0098{\cdot}10^{-6}{\cdot}X_w-0.4287{\cdot}10^{-6},(m^2{\cdot}s^{-1})$$ Maximal differences of the thermal diffusivities predicted with this equation were in the range of ${\pm}0.8\%$ compared with the practical values. This equation and another predicting equation obtained from the previous study for the pork product without fish meat could be simplified as following one equation, and the maximal differences of the thermal diffusivities predicted with this equation for both products with and without fish meat were in the range of less than ${\pm}2.5\%$ $${\alpha}_p=(2.290+0.54{\cdot}X_w){\cdot}{\alpha}_w+0.0024{\cdot}10^{-6}{\cdot}X_w-0.3535{\cdot}10^{-6},(m^2{\cdot}s^{-1})$$