• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1303-1313
• /
• 1997

A micro-macroscopic analysis on the conduction-controlled directional casting of Al-Cu alloys is performed, in which emphases are placed on the microstructural features. In order to facilitate the solution procedure, an iterative micro-macroscopic coupling algorithm is developed. The predicted results show that the effect of finite back diffusion on the transient solidification process in comparison with the lever rule depends essentially on the initial concentration of an alloy. In the final casting, the eutectic fraction is distributed in an increasing-decreasing-increasing pattern, each mode of which is named the chill, interior and end zones. This nonuniformity per se suffices to justify the necessity of this work because it originates from the combined effects of finite back diffusion and cooling path-dependent nature of the eutectic formation. As the cooling rate is enhanced, not only the influence depths of boundaries narrow, but also the eutectic fractions in the chill and interior zones increase. In addition, it is revealed for the first time that the micro segregation band is formed in response to a sudden change in cooling rate during the directional casting. An increasing change creates an overshooting band in the eutectic fraction distribution, and vice versa.

• 한국의학물리학회지:의학물리
• /
• 제18권2호
• /
• pp.65-72
• /
• 2007

대부분의 임상용 자기공명영상 장치에서 확산텐서(difiusion tensor) 영상을 얻기 위하여 에코플렌(EPI) 스핀에코(spin-echo) 시퀀스를 사용한다. 하지만 이 영상법은 자화감수성에 매우 예민한 단점이 있다. 따라서 본 연구의 목적은 자화감수성에 의해 발생하는 영상의 변질을 최소화하면서 확산텐서를 한번에 얻을 수 있는 시퀀스를 개발하는데 있다. 모든 확산 텐서 성분을 한번에 얻기 위하여 다편(multi-slice) 8에코 스핀에코 시퀀스(MePGSE)가 개발되었다. 모든 180도 펄스는 기존에 사용된 방법과는 달리 선택된(slice selective) 경사자장을 이용하였다. 처음 7개의 에코 영상은 확산텐서 영상을 위하여 사용하였고, 마지막 에코 영상에서는 영상을 얻는 경사자장은 사용하지 않고 남아있는 자화를(residual magnetization) 최소화하기 위하여 삼차원 경사자장(crusher gradients)만을 사용하였다. 따라서 6개의 텐서 성분을 단 한번의 실험에 의하여 얻을 수 있었다. 이 시퀀스를 사용하여 물과 수박을 이용하여 실험을 하였으며 물에서의 확산 값이 기존에 출판된 값과 유사하게 나타나 본 연구에서 MePGSE 시퀀스의 신뢰를 가질 수 있었다.

• 한국대기환경학회지
• /
• 제20권1호
• /
• pp.47-58
• /
• 2004

The $textsc{k}$-$\varepsilon$ algebraic stress model (KEASM) was applied to atmospheric dispersion simulation using the Lagrangian particle dispersion model and was compared with the most popular turbulence closure model in the field of atmospheric simulation, the Mellor-Yamada (MY) model. KEASM has been rarely applied to atmospheric simulation, but it includes the pressure redistribution effect of buoyancy due to heat and momentum fluxes. On the other hand, such effect is excluded from MY model. In the simulation study, the difference in the two turbulence models was reflected to both the turbulent velocity and the Lagrangian time scale. There was little difference in the vertical diffusion coefficient $\sigma$$_{z}$. However, the horizontal diffusion coefficient or calculated by KEASM was larger than that by MY model, coincided with the Pasquill-Gifford (PG) chart. The applicability of KEASM to atmospheric simulations was demonstrated by the simulations.s.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.59-66
• /
• 2000

To investigate the optimum brazing condition, variation of bonded structure and mechanical properties of novel brazed pure Al with bonding condition (brazing temperature, time and Si/flux ratio) was studied. A basic study of the bonding mechanism was also examined. The optimum brazing condition was obtained at $590^{\circ}$ for 2 minutes and the bonded structure showed that it is composed of almost entirely eutectic Al-Si with near eutectic composition. At higher brazing temperature $630^{\circ}$, hypoeutectic Al-Si structure was observed in the bonded area and resulted in erosion of base metal. The thickness of eutectic layer formed in optimum brazing temperature increased linearly with the square root of time, showing a general diffusion controlled process. The ultimate tensile strength of bonded joint brazed at an optimum brazing condition was about 60% of base metal and its fracture surface showed a brittle mode.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.383-391
• /
• 2017

In this paper, we investigate the impacts of network topology on the performance of a distributed estimation algorithm, namely combine-then-adaptive (CTA) diffusion LMS, based on the data with or without the assumptions of temporal and spatial independence with noisy links. The study covers different network models, including the regular, small-world, random and scale-free whose the performance is analyzed according to the mean stability, mean-square errors, communication cost (link density) and robustness. Simulation results show that the noisy links do not cause divergence in the networks. Also, among the networks, the scale free network (heterogeneous) has the best performance in the steady state of the mean square deviation (MSD) while the regular is the worst case. The robustness of the networks against the issues like node failure and noisier node conditions is discussed as well as providing some guidelines on the design of a network in real condition such that the qualities of estimations are optimized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.63-64
• /
• 2000

The low-temperature Si oxidation kinetics by inductively coupled oxygen plasma has been studied. Linear rate constants had negative values when the oxide growth rate was described by linear-parabolic growth law. The analysis of transverse-optical mode frequencies and etch rates indicated that the density of surface oxide was lower than that of bulk oxide. The oxidation kinetics could be explained qualitatively by assuming a surface layer with larger diffusion coefficient and a bulk layer with smaller diffusion coefficient.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.252-259
• /
• 2008

The purpose of this study is to estimate the movement of microbial contaminant caused by bio-attack using bio-agent such as bacillus anthracis for preventing contaminant diffusion. multizone simulation was carried out in the case of three types of bio-attack scenario in the government building. Simulation results show that severe contaminant diffusion is brought about in all cases of bio-attack scenario in one hour, though pollution boundaries have different mode according to bio-attack scenarios. Simulation results also show that immune building technology such as filter and UVGI technology gives us powerful alternatives to meet the emergent situation caused by unexpected bio-attack.

• 한국토양환경학회지
• /
• 제2권2호
• /
• pp.81-94
• /
• 1997

오염물질 이동현상 연구에서는 침출수 혹은 잔존수농도 형태가 사용되는데 이의 선택은 모니터링 방법에 의존하게 된다. 파과곡선 실험에서 모니터링 농도 형태에 관한 선택은 임의적이며, 각 농도 형태에서 얻어진 운송 파라미터들은 동등하며 다공성매질의 수리적 특성을 각각 대표하는 것으로 알려져왔다. 그러나, 현장상태의 구조적 발달을 보이는 토양에서는 농도 형태별 운송계수의 동등성이 의문시 된다. 본 연 구에서는 불교란 현장시료(직경 20cm, 높이 20cm)에 대하여 두가지 농도 형태에 의한 파과곡선 실험을 시행하므로써 모니터링 방법에 따른 농도 형태와 그에 따른 운송 파라미터들을 비교분석 하였다. 침출수 농도와 잔존수 농도는 토양상부에서 20cm와 loom 떨어진 지점에서 EC-meter와 TDR 을 이용하여 각각 측정하였다. 연구결과, 침출수 농도는 잔존수 농도보다 첨두농도가 훨씬 높게 그리고 첨두농도의 운송시간이 짧게 나타났음을 알 수 있었다. 따라서 침출수농도곡선으로부터 추정된 운송파 라미터들은 잔존수농도곡선으로부터 추정된 수치들과 상당한 차이를 보였으며 그 차이는 CLT 모델보다 CDE 모델에서 더 크게 나타났다. 특히 CDE 모델에서는 침출수곡선으로부터 도출된 계수값들이 잔존수곡선으로부터 도출된 계수값들보다 훨씬 크게 나타났다. 이는 구조토양내에 존재하고 있는 대공극을 통한 오염물질 우회통과와 평형조건에서의 CDE 모델이 연구대상토양에서의 오염물질 이동현상을 표현하는데 부적합하였기 때문인 것으로 사료된다. 분자 분산에 대한 동수리학적 확산의 비와 Peclet number와의 상관관계를 나타내는 도표영역에서 두가지 농도는 모두 역학적 확산이 오염물질 운송을 좌우하는 영역에 속하였다. 그러나 분자분산은 토양내 대공극부분보다 matrix 부분에서의 오염물질 확산에 더 많은 기여를 하는 것으로 나타났으며 이는 공극유속과 확산계수사이에 존재하는 비선형성에 기인하기 때문인 것으로 사료된다.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.269-277
• /
• 1996

Bacteriocins are proteins produced by a heterogeneous group of bacteria that have a bactericidal effect on closely related organisms. Recently, bacteriocins from lactic acid bacteria and other food-related organisms have been the subject of much research because of their potential as food biopreservatives. Various modifications of agar plate diffusion assays are the most widely used methods even though the limitations of such assays are generally recognized. The ability to obtain a concentrated crude preparation on bacteriocin by optimizing production parameters greatly simplifies recovery of bacteriocin on subsequent purification steps. Some studies performed to optimize bacteriocins have been purified to homogeneity, and the amino acid sequences of many of these purified bacteriocins have been determined. Obtaining characterization data on purified bacteriocin will minimize the risk of overlapping of research and confusion on identification of these compounds. Several me-chanisms leading to cell death have been hypothesized. These include depletion of the proton motive force(PMF) across the cell membrane: RNase and/or DNase activity within the sensitive cell; and pore formation and lysis of sensitive cells at the cell membrane.

• 한국광학회지
• /
• 제5권2호
• /
• pp.304-310
• /
• 1994

광섬유내에 첨가되어 있는 $GeO_{2}$등의 물질을 열확산시켜서 만드는 열확장코어 광섬유는 광섬유 복합소자에서 회절에 의한 솔실을 줄여주는 역할을 함으로써 시준과 집광을 위한 렌즈가 필요없게 된다. 광섬유의 열처리를 위하여 전기로를 제작하였으며 $1.3\mu\textrm{m}$ 단일 모드 광섬유를 $1250^{\circ}C$에서 10시간동안 열처리한 결과 모드 크기가 27% 확장되었음을 확인할 수 있었다.