• Title/Summary/Keyword: diffusion mode

Search Result 227, Processing Time 0.026 seconds

Fabrication of High Speed Optical Matrix Wwitch by Ti:Ti:LiNbO3 (Ti:Ti:LiNbO3를 이용한 초고속 광 매트릭스 스위치 제조)

  • Yang, U-Seok;Kwak, Yong-Seok;Kim, Je-Min;Yoon, Hyeong-Do;Lee, Han-Yeong;Yoon, Dae-Ho
    • Korean Journal of Materials Research
    • /
    • v.12 no.4
    • /
    • pp.254-258
    • /
    • 2002
  • To realize channel cross-connecting in optical communications systems, a high speed optical matrix switch was fabricated using z-cut $LiNbO_3$. For switch fabrication was design bending structure and coupling length and four $2{\times}2$ directional couplers were integrated on one substrate far construction of a $4{\times}4$ switch. Single-mode optical waveguides were formed by Ti-diffusion at a wet $O_2$ atmosphere. Ti-diffusion profile, refractive index variation and waveguide morphology were analyzed by Prism coupler and optical microscopy, respectively.

Investigation of carbon nanotube growth termination mechanism by in-situ transmission electron microscopy approaches

  • Kim, Seung Min;Jeong, Seojeong;Kim, Hwan Chul
    • Carbon letters
    • /
    • v.14 no.4
    • /
    • pp.228-233
    • /
    • 2013
  • In this work, we report in-situ observations of changes in catalyst morphology, and of growth termination of individual carbon nanotubes (CNTs), by complete loss of the catalyst particle attached to it. The observations strongly support the growth-termination mechanism of CNT forests or carpets by dynamic morphological evolution of catalyst particles induced by Ostwald ripening, and sub-surface diffusion. We show that in the tip-growth mode, as well as in the base-growth mode, the growth termination of CNT by dissolution of catalyst particles is plausible. This may allow the growth termination mechanism by evolution of catalyst morphology to be applicable to not only CNT forest growth, but also to other growth methods (for example, floating-catalyst chemical vapor deposition), which do not use any supporting layer or substrate beneath a catalyst layer.

A VLSI implementation of image processor for facsimile and digital copier (팩시밀리 및 디지털 복사기를 위한 고속 영상 처리기의 VLSI구현)

  • 박창대;정영훈;김형수;김진수;권오준;홍기상;장동구;박기용;김윤수
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.1
    • /
    • pp.105-113
    • /
    • 1998
  • A new image processor is implemented for high-speed digital copiers and facsimiles. The imgage processor performs CCD and CIS interface, pre-processing, enlargement andreduction of gray level image, and various halftoning algorithms. Implemented halftoning algorithms are simple thresholding, fuzzy based mixed mode thresholding, dithering, and edge enhanced error diffusion. The result of binarization is transferred to a printer with serial or paralel output ports. Line by line pipelined data prodessing architecture is employed with time sharing access of the external memory. In receiving mode, it converts the resolution of received binary image for compatibility with conventional facsimile. In copy mode, a line of A3 paper with 400 dpi is processed with in 2.5 ms. The prototype of image processor was implemented usig Laser Programmable Gate Array (LPGA) with 0.8.mu.m technology.

  • PDF

A Study on the Development of TCM Urban-Mode (도시형-TCM 개발에 관한 연구)

  • 장영기;조경두
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.9 no.2
    • /
    • pp.132-139
    • /
    • 1993
  • TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

  • PDF

Comparison of Nano Particle Size Distributions by Different Measurement Techniques

  • Bae, Min-Suk;Oh, Joon-Seok
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.26 no.2
    • /
    • pp.219-233
    • /
    • 2010
  • Understanding the Nano size particles is of great interest due to their chemical and physical behaviors such as compositions, size distributions, and number concentrations. Therefore, accurate measurements of size distributions and number concentrations in ultrafine particles are getting required because expected losses such as diffusion for the instrument system from ambient inlet to detector are a significant challenge. In this study, the data using the computed settling losses, impaction losses, diffusion losses for the sampling lines (explored different sampling line diameters, horizontal length, number of bending, line angles, flow rates with and without a bypass), and diffusion losses for the Scanning Mobility Particle Sizers are examined. As expected, the settling losses and impaction losses are very minor under 100 nm, however, diffusion loss corrections for the sampling lines and the size instrument make a large difference for any measurement conditions with high numbers of particles smaller mobility size. Both with and without the loss corrections, which can affect to size distributions and number concentrations are described. First, 80% or more of the smallest particles (less than 10 nm) can be lost in the condition of a flow rate of 0.3 liter per minute and the length of sampling line of 1.0 m, second, total number concentrations of measurements are quite significantly affected, and the mode structure of the size distribution changes dramatically after the loss corrections applied. With compared to the different measurements, statistically diffusion loss corrections yield a required process of the ambient particle concentrations. Based on the current study, as an implication, a possibility of establishing direct revelation mechanisms is suggested.

Edge-flame Instability in A Low Strain-rate Counterflow Diffusion Flame (저신장율 대향류확산화염에서 에지화염 진동불안정성)

  • Park, June-Sung;Kim, Hyun-Pyo;Park, Jeong;Kim, Song-Cho;Kim, Jeong-Soo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2006.11a
    • /
    • pp.295-298
    • /
    • 2006
  • Experiments in methane-air low strain rate counterflow diffusion flames diluted with nitrogen have been conducted to study the behavior of flame extinction and edge flame oscillation in which lateral conduction heat loss in addition to radiative heat loss could be remarkable at low global strain rates. Onset conditions of edge flame oscillation and flame oscillation modes are also provided with global strain rate. It is seen that flame length is closely relevant to lateral heat loss, and this affects flame extinction and edge flame oscillation. Edge flame oscillations in low strain rate flames are categorized into three: a growing oscillation mode, a decaying oscillation mode, and a harmonic oscillation mode. The regime of flame oscillation is also provided at low strain rate flames.

  • PDF

In Vivo and In Vitro Studies of the Steady State Free Precession-Diffusion-Weighted MR Imagings on Low b-value : Validation and Application to Bone Marrow Pathology

  • Byun, Woo-Mok
    • Journal of Yeungnam Medical Science
    • /
    • v.24 no.2
    • /
    • pp.119-128
    • /
    • 2007
  • Purpose : The purpose of this study was a phantom study to measure the diffusion properties of water molecules by steady-state free precession diffusion-weighted imaging (SSFP- DWI) with a low b-value and to determine if this sequence might be useful for application to the evaluation of bone marrow pathology. Materials and methods : 1. The phantom study: A phantom study using two diffusion weighted sequences for the evaluation of the diffusion coefficient was performed. Three water-containing cylinders at different temperatures were designed: phantom A was $3^{\circ}C$, B was $23^{\circ}C$ and C was $63^{\circ}C$. Both SSFP and echo planar imaging (EPI) sequences (b-value: $1000s/mm^2$) were performed for comparison of the diffusion properties. The Signal to noise ratios (SNR) and apparent diffusion coefficient (ADC) values of the three phantoms using each diffusion-weighted sequence were assessed. 2. The Clinical study: SSFP-DWI was performed in 28 patients [sacral insufficiency fractures (10), osteoporotic lumbar compression fractures (10), malignant compression fractures (8)]. To measure the ADC maps, a diffusion-weighted single shot stimulated echo-acquisition mode sequence ($650s/mm^2$) was obtained using the same 1.5-T MR imager Results : For the phantom study, the signal intensity on the SSFP as well as the classic EPI-based DWI was decreased as the temperature increased in phantom A to C. The ADC values of the phantoms on EPI-DWI were $0.13{\times}10^{-3}mm^2/s$ in phantom A, $0.22{\times}10^{-3}mm^2/s$ in B and $0.37{\times}10^{-3}mm^2/s$. in C. The SSFP can be regarded as a DWI sequence in view of the series of signal decreases. Conclusion : Bone marrow pathologies with different diffusion coefficients were evaluated by SSFP-DWI. All benign fractures were hypointense compared to the adjacent normal bone marrow where as the malignant fractures were hyperintense compared to the adjacent normal bone marrow.

  • PDF

Probe Diffusion and Viscosity Properties in Dimethyl Sulfoxide Solution of Poly(vinyl alcohol) with High Degree of Hydrolysis (고검화도의 폴리(비닐 알코올)/디메틸설폭사이드 용액에서의 점성도 특성과 탐침입자의 확산)

  • Eom, Hyo-Sang;Park, Il-Hyun
    • Polymer(Korea)
    • /
    • v.34 no.5
    • /
    • pp.415-423
    • /
    • 2010
  • Poly(vinyl alcohol)(PVA) with high degree of hydrolysis of above 98% was dissolved in dimethyl sulfoxide(DMSO), and the shear viscosity was measured up to $C{\simeq}0.14\;g/mL$ in the semi-dilute solution regime. Next, as probe particle, polystyrene(PS) latex was introduced into this matrix system and its delayed diffusion due to polymer concentration was investigated by means of dynamic light scattering. When the solution viscosity of PVA/DMSO was plotted against the reduced concentration $C[{\eta}]$, which is scaled by the intrinsic viscosity, the molecular weight dependence was strongly appeared at C$[{\eta}]$ >2. Some heterogeneties in polymer solution were considered as its source. Contrary, the diffusion of probe particle in the matrix solution was observed as a single mode motion at whole concentration range but its ratio of its diffusion coefficient at solution to that at solvent, D/Do did not show any molecular weight dependence at all. However, the application limit of the stretched exponential function was disclosed at C$[{\eta}]$ >2.5.

Using TPC Model to Understand Broadband Diffusion in Korea (TPC(Technology, Policy and Culture) 모델을 이용한 한국의 초고속인터넷 확산 요인 분석)

  • Kum, Heisung
    • Informatization Policy
    • /
    • v.17 no.3
    • /
    • pp.74-97
    • /
    • 2010
  • This paper investigates factors that have facilitated the rapid diffusion of broadband in South Korea. It finds that the quick spread of broadband access in South Korea is the result of combining the government's strategic ICT policy considering cultural traits, businesses'competitive efforts, and the timely explosion of domestic demand for IT service. This paper also discusses the impact of broadband diffusion on the digital divide. It finds that although there are still regional and age gaps in broadband access, the Korean government and businesses are working to alleviate these problems through various ways from systemic to physical ones. While the deployment of broadband cannot eliminate every issue of the digital divide, broadband access minimizes the digital divide by lowering the barrier to inequitable access to information. This paper concludes with a number of recommendations that address selected policy issues related to the spread of broadband Internet for its successful implementation.

  • PDF

Study on self-diffusion transport phenomena during mercurous bromide (Hg2Br2) vapor processes (브로민화수은(I)(Hg2Br2) 증착공정에서 자체확산 연구)

  • Nam Il Kim;Geug Tae Kim
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.34 no.2
    • /
    • pp.48-54
    • /
    • 2024
  • During the Hg2Br2 physical vapor transport process with self-diffusion, it is concluded that for 10-3g0≤ g ≤ 1g0 the thermal buoyancy driven convection is dominant in the vapor phase; at the gravitational level of g = 10-4g0, the transition region from the convection to diffusion occurs; for 10-6g0 ≤ g ≤ 10-5g0, the diffusion mode is predominant. The total molar flux of Hg2Br2 decays exponentially with the decreasing of one tenth of gravitational magnitude. For 10℃ ≤ ΔT ≤ 50℃, the total molar flux increases linearly and directly with the temperature difference between the source and crystal regions.