• Korean Journal of Pharmacognosy
• /
• v.54 no.2
• /
• pp.72-79
• /
• 2023

MRSA is Staphylococcus aureus resistant to β-lactam antibiotics, and is a worldwide infectious disease. Even with the discovery of new antibiotics, resistance develops rapidly, so new alternatives are needed. Jakyakgamcho-tang (JGT) is a combination of Jakyak and Gamcho, and has been mainly used as an antispasmodic and analgesic in oriental medicine. This study was conducted to find out whether there is an effect on MRSA in relation to the anti-inflammatory effect of JGT and the antibacterial effect of Jakyak and Gamcho found in previous studies. In this study, in order to investigate the antibacterial activity of JGT and the combined effect of existing antibiotics, after extracting JGT with 70% EtoH, the disc diffusion method, minimum inhibitory concentration (MIC), drug combination effect (FICI), and time-kill analysis (Time-kill assay), metabolic inhibition, Western blot and qRT-PCR analysis were used to confirm the antibacterial activity mechanism of MRSA of JGT. As a result of the experiment, all of MRSA showed antibacterial activity in JGT's disc diffusion method, and the MIC was 250-1000 ㎍/mL. When existing antibiotics and JGT were combined with drugs, most had synergy or partial synergy. In addition, it was confirmed that the degree of bacterial growth was suppressed over time when simultaneous administration for 24 hours. JGT showed a synergistic effect when administered together with the ATPase-inhibitor DCCD, suggesting that it affected the inhibition of ATPase. As a result of observing the expression of PBP2a, and hla protein in the JGT-treated group and the untreated control group through wstern blot, it was confirmed that the protein expression of the JGT-treated group was significantly suppressed, and the expression levels of mecA, mecR1 and hla genes were also suppressed during JGT treatment. was observed by qRT-PCR. Combining the results of the experiment, it can be seen that JGT has antibacterial activity in MRSA, and when combined with existing antibiotics, the effect was increased compared to treatment with the drug alone. This suggests that JGT can be an alternative to treatment for antibiotic resistance of MRSA.

• Information Systems Review
• /
• v.13 no.3
• /
• pp.141-163
• /
• 2011

The advancement of information technologies including the Internet has affected the way of social information processing as well as brought about the paradigm shift to the information society. Accordingly, it is very important to study the process of social information processing over the digital media through which social information is generated, distributed, and led to social consensus. In this study, we analyze the mechanism of social information processing, identify a process model of social consensus and institutionalization of the results, and finally propose a set of information processing characteristics on the internet media. We deploy the ethnographic approach to analyze the meaning of group behavior in the context of society to analyze two major events which happened in Korean society. The formation process of social consensus is found to consist of 5 steps: suggestion of social issues, selective reflection on public opinion, acceptance of the issues and diffusion, social consensus, and institutionalization and feedback. The key characteristics of information processing in the Internet is grouped into proactive response to an event, the changes in the role of opinion leader, the flexibility of proposal and analysis, greater scalability, relevance to consensus making, institutionalization and interaction. This study contributes to the literature by proposing a process model of social information processing which can be used as the basis for analyzing the social consensus making process from the social network perspective. In addition, this study suggests a new perspective where the utility of the Internet media can be understood from the social information processing so that other disciplines including politics, communications, and management can improve the decision making performance in utilizing the Internet media.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.309-319
• /
• 2011

We experimentally investigated lifted propane jet flames diluted with nitrogen to obtain flame-stability maps based on heat-loss-induced self-excitation. We found that heat-loss-induced self-excitations are caused by conductive heat loss from premixed flame branches to trailing diffusion flames as well as soot radiation. The conductive-heat-loss-induced self-excitation at frequencies less than 0.1 Hz is explained well by a suggested mechanism, whereas the oscillation of the soot region induces a self-excitation of lift-off height of the order of 0.1 Hz. The suggested mechanism is also verified from additive experiments in a room at constant temperature and humidity. The heat-loss-induced self-excitation is explained by the Strouhal numbers as a function of the relevant parameters.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.351-360
• /
• 2018

In this study, propylene/propane separation mechanism through NaY zeolite membrane was investigated. As permeation temperature increased, both propylene and propane permeances increased, saturated and decreased again, and a maximum selectivity was shown at around 50 to $60^{\circ}C$. Propane permeance in mixed gas experiment was much smaller than that in single gas experiment, and propylene/propane mixed gas selectivity was much larger than single gas permselectivity. As permeation time increased in transient permeation experiment, propylene permeance initially increased and saturated, while propane permeance decreased and saturated. All the experimental results announced that propylene/propane separation through NaY zeolite membrane was from preferentially adsorbed propylene molecules. The adsorbed propylene molecules efficiently prevented propane molecules from permeating through the membrane, and sufae diffused through the membrane. NaY zeolite capillary membrane prepared in the present study showed a high mixed gas selectivity of 12 and high propylene permeance of 497 GPU for a propylene/propane (89 : 11) mixture at $50^{\circ}C$ and 4 bar. Therefore, it was concluded that NaY zeolite membrane is one of promising membrane materials for propylene/propane separation due to the low cost and high separation performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.113-119
• /
• 2006

Brazing is an important manufacturing process in the fabrication of Heavy Water Reactor fuel rods, in which bearing and spacer pads are joined to Zircaloy-4 cladding tubes. The physical vapor deposition(PVD) technique is currently used to deposit metallic Be on the surfaces of pads as a filler metal. Amorphous Zr-Be binary alloys which are manufactured by rapid solidification process are under developing to substitute the conventional PVD-Be coating. In the present study, brazed joint with PVD and amorphous alloys of $Zr_{1-x}Be_{x}(0.3{\le}x{\le}0.5)$ as filler metals are compared by mechanism, microstructure and hardness. The thickness of brazed joint with amorphous alloys became much smaller than that of PVD-Be. The erosion of base metal did not occur in the brazed joint with amorphous alloys. The brazing mechanism for PVD-Be seems to be Be diffusion into Zr-4 with capillary action resulting from eutectic reaction while that for amorphous alloys are associated with the liquid phase formation in the brazed joint. The brazed joint microstructure with PVD-Be consists of dendrite while that with amorphous alloys is globular. The $Zr_{0.7}Be_{0.3}$ alloy shows the smooth interface with little erosion in the base metal and is recommended a most suitable brazing filler metal for Zircaloy-4.

• Nuclear Engineering and Technology
• /
• v.4 no.2
• /
• pp.132-136
• /
• 1972

The mechanism for activated sintering of UO$_2$by an addition of 0.05 w/o TiO$_2$was investigated using a high temperature X-ray diffractometer. The diffraction pattern of UO$_2$pellets was studied in a temperature range from room temperature to 120$0^{\circ}C$ in hydrogen atmosphere. At 120$0^{\circ}C$, the expansion of UO$_2$lattice were 1.448% and 1.354% greater when it was compared with those at room temperature for pellets with and without the 0.05 w/o TiO$_2$addition, respectively-The effect of the TiO$_2$addition is to increase the lattice constant of UO$_2$by 0.094% at 120$0^{\circ}C$. The lattice constant at 120$0^{\circ}C$without the TiO$_2$addition is equal to that at 108$0^{\circ}C$ with the 0.05 w/o TiO$_2$addition. This temperature difference could be well compared with the suppression of sintering temperature by TiO$_2$hat had been observed Previously. It is believed that the increase in lattice expansion due to the TiO$_2$addition would give rise to the activated sintering of UO$_2$by the lattice-expansion-induced-enhancement of self diffusion.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2022

In this paper, parameter characteristics such as pH effect, isotherm, kinetic and thermodynamic parameters and competitive adsorption of dyes including malachite green (MG), direct red 81 (DR 81) and thioflavin S (TS), which have different functional groups, being adsorbed onto activated carbon were investigated. Langmuir, Freundlich and Temkin isotherm models were employed to find the adsorption mechanism. Effectiveness of adsorption treatment of three dyes by activated carbon were confirmed by the Langmuir dimensionless separation factor. The mechanism was found to be a physical adsorption which can be verified through the adsorption heat calculated by Temkin equation. The adsorption kinetics followed the pseudo second order and the rate limiting step was intra-particle diffusion. The positive enthalpy and entropy changes showed an endothermic reaction and increased disorder via adsorption at the S-L interface, respectively. For each dye molecule, negative Gibbs free energy increased with the temperature, which means that the process is spontaneous. In the binary component system, it was found that the same functional groups of the dye could interfere with the mutual adsorption, and different functional groups did not significantly affect the adsorption. In the ternary component system, the adsorption for MG lowered a bit, likely to be disturbed by the other dyes meanwhile DR 81 and TS were to be positively affected by the presence of MG, thus resulting in much higher adsorption.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.1
• /
• pp.46-71
• /
• 2008

Although the volume of mobile internet services has increased continually over the years, the rapid diffusion has still fallen short of expected quality. This paper considers mobile internet service industry in Korea as a system failure due to structural problems and attempts to identify systemic imperfection mechanisms from the supply side. The problems of mobile internet industry in Korea are categorized into interaction failures, institutional failures and capabilities failures which contribute to system failure and at the same time, failure types are linked to each other. It is needed to improve policy and institutions in operation and develop new policy for contents providers to promote mobile internet industry. This research findings will contribute to policy making to promote mobile internet service industry and development of sectoral system for emerging industries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.