• Journal of Microbiology and Biotechnology
• /
• v.27 no.1
• /
• pp.43-48
• /
• 2017

In a previous study, we analyzed the transcriptome of Scolopendra subspinipes mutilans using next-generation sequencing technology and identified several antimicrobial peptide candidates. One of the peptides, scolopendrasin V, was selected based on the physicochemical properties of antimicrobial peptides using a bioinformatics strategy. In this study, we assessed the antimicrobial activities of scolopendrasin V using the radial diffusion assay and colony count assay. We also investigated the mode of action of scolopendrasin V using flow cytometry. We found that scolopendrasin V's mechanism of action involved binding to the surface of microorganisms via a specific interaction with lipopolysaccharides, lipoteichoic acid, and peptidoglycans, which are components of the bacterial membrane. These results provide a basis for developing peptide antibiotics.

• Journal of Powder Materials
• /
• v.19 no.2
• /
• pp.134-139
• /
• 2012

P/M coppers are subjected to the isothermal compression tests at the strain rate ranging from 0.01 to 10.0 $s^{-1}$ and the temperature from 200 to $800^{\circ}C$. The processing map reveals the dynamic recrystallization (DRX) domain in the following temperature and strain rate ranges: $600-800^{\circ}C$ and 0.01-10.0 $s^{-1}$, respectively. In the domain, the region at temperature of $600^{\circ}C$ and strain rate of $10^{-2}s^{-1}$ shows peak efficiency. From the kinetic analysis, the apparent activation energy in the DRX domain is 190.67 kJ/mol and it suggests that lattice self-diffusion is the rate controlling mechanism.

• Journal of Pharmaceutical Investigation
• /
• v.2 no.1
• /
• pp.18-30
• /
• 1972

Renal pathways for excretion of sulfadiazine has been studied by standard clearance technique in the rabbit. 1. Large part of sulfadiazine filtered in the glomeruli is reabsorbed in the tubules, as visualized from the fact that Csd (clearance of sulfadiazine) amounts only a fraction of simultaneously measured Ccr (GFR). 2. Csd changed linearly with the rate of urine flow, whether it is increased by the duir etics or decreased by clamping u reter. 3. Csd remained unchanged until the plasma level of the Csdremained unchanged drug reached 10.0 mg%, and the amount transported in the tubules increased linearly with the increase in the load, exhibiting No maximum capacity for transport. 4. Csd was increased by 2,4-dinitrophenol which is an uncoupling agent of oxidative phosphorylation and decreased by probenecid which is on uricosuric agent. 5. During sodium bicarbonate infusion net secretion of sulfadiazine by tubules observed. All the evidences obtained in the rabbit indicated that sulfadiazine was reabsorbed by active, energy-requiring, or passive, simple diffusion, process, and secreted simultaneously by a probenecid-sensitive, active procss.

• Journal of the Korean Society of Combustion
• /
• v.12 no.2
• /
• pp.26-33
• /
• 2007

To reveal the newly found liftoff height behavior of hydrogen jet, we have experimentally studied the stabilization mechanism of turbulent, lifted jet flames in a non-premixed condition. The objectives of the present research are to report the phenomenon of a liftoff height decreasing as increasing fuel velocity, to analyse the flame structure and behavior of the lifted jet, and to explain the mechanisms of flame stability in hydrogen turbulent non-premixed jet flames. The velocity of hydrogen was varied from 100 to 300m/s and a coaxial air velocity was fixed at 16m/s with a coflow air less than 0.1m/s. For the simultaneous measurement of velocity field and reaction zone, PIV and OH PLIF technique was used with two Nd:Yag lasers and CCD cameras. As results, it has been found that the stabilization of lifted hydrogen diffusion flames is related with a turbulent intensity, which means that combustion occurs at the point where the local flow velocity is balanced with the turbulent flame propagation velocity.

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.658-668
• /
• 1997

Path of a small hydrophobic molecule through the aqueous cytoplasma is not linear. Partition may favor membrane binding by several orders of magnitude : thus significant membrane association will markedly decrease the cytosolic transport rate. The presence of high concentration of soluble binding proteins for these hydrophobic molecules would compete with membrane association and thereby increase transport rate. For long chain fatty acid molecules, a family of cytosolic binding proteins collectively known as the fatty acid binding proteins(FABP), are thought to act as intracellular transport proteins. This paper examines the mechanism of transfer of fluorescent antyroyloxy-labeled fatty acids(AOFA) from purified FABPs to phosholipid membranes. With the exception of the liver FABP, AOFA is transferred from FABP by collisional interaction of the protein with a acceptor membrane. The rate of transfer increased markedly when membranes contain anionic phospholipids. This suggests that positively charged residues on the surface of the FABP may interact with the membranes. Neutralization of the surface lysine residues of adipocyte FABP decreased fatty acid transfer rate, and transfer was found to proceed via aqueous diffusion rather than collisional interaction. Site specific mutagenesis has further shown that the helix-turn-helix domain of the FABP is critical for interaction with anionic acceptor membranes. Thus cytosolic FABP may function in intracellular transport of fatty acid to decrease their membranes association as well as to target fatty acid to specific subcellular sites of utilization.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.15-21
• /
• 1988

The Polarographic behavior of 1-(2-thiazolylazo)-2-naphthol (TAN) in acetonitrile solution was studied. From the DC polarograms of TAN in acetonitrile solution, the type of reduction current and the effect of proton donor such as water have been investigated. In order to explain the reduction mechanism, the number of the electrons for each reduction step was measured by controlled potential coulometric technique and the electrolysis products were identified by UV-Vis spectroscopy and IR spectroscopy. The results were shown that the reduction of TAN in acetonitrile solution occurred with four-one electron steps. In addition, each reduction step was considerably reversible and the reduction current was diffusion controlled.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.84-90
• /
• 2015

Titanium alloys has been received an attention due to their excellent specific strength and many other superior properties in the application of components of flying subjects. In this study, Ti-6Al-4V (Ti64 alloy) has been selected in order to evaluate oxidation and degradation behaviors under the exposure of high temperature flame. The alloy has been coated with Al diffusion coating routes. The coated alloys showed an improved oxidation and degradation behaviors. The oxidation and degradation mechanism for the coated and uncoated alloys has been discussed in terms of microstructural observations.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2001

In order to form a uniform oxidation layer of spinel phase on Kovar which helps the strong bonding in Kovar-to-glass sealing, the humidified $N_2/H_2$ was used as an oxidation atmosphere. The oxidation of Kovar was controlled by diffusion mechanism and the activation energy was 31.61 kacl/mol at 500~$800^{\circ}C$. After oxidation at $600^{\circ}C$, the external oxidation layer was below 0.5 $\mu \textrm{m}$ thick. According to TEM analysis, oxidized Kovar was spinel its lattice parameter of 7.9 $\AA$. Oxidation of under $600^{\circ}C$ and in a humidified $N_2/H_2$ atmosphere, Kovar was found to be appropriate for the Kovar-to-glass sealing.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.375-385
• /
• 1996

Recently interest in the fabrication of LD operated by low current is gradually increasing as fabrication techniques of MQW-LD are progressed. In this viewpoint, theoretical estimation for decreasing the amount of threshold current will be helpful to design and make LD in case that active layer of conventional bulk type RWG-LD structure is replaced with MQW structure. Therefore, the optimum design condition of RWG MQW-LD was obtained from theoretical analysis in order to operate in the weakly index-guided LD and low threshold current. The lateral effective index step has been obtained in RWG MQW-LD structure. Waveguide mechanism including this index step has been investigated by solving the carrier diffusion equation and lateral wave equation. From these theoretical results, the optimum design condition of RWG MQW-LD have been suggested.

• 연구논문집
• /
• s.29
• /
• pp.141-149
• /
• 1999

Brazing of Fe-Cr-Al alloy was carried out at $1200^{\circ}C$ in vacuum furnace using nickel-based filler metals : BNi-5 powder(Ni-Cr-Si-Fe base alloy} and MBF-50 foil (Ni-Cr-Si-B). The effect of boron content on the stability of oxide scale on the brazed joint was investigated by means of cyclic oxidation test performed at $1050^{\circ}C$ and $1200^{\circ}C$. Apparently, the joints brazed with MBF-50 containing boron showed relatively stable oxidation rates compared to boron-free BNi-5 at both temperatures. However, it was considered that the slower weight loss of MBF-50 brazed specimen wasn’t resulted from the low oxidation rate but from the spallation of oxide layer. The oxide layer consisted of thick spinel oxide on the surface and $Al_2 O_3$ internal oxide layer along the interface between mother alloy and braze, the mother alloy was also eroded seriously by the formation of spinel oxides such as $FeCr_2 O_4$ and $NiCr_2 O_4$ on the surface, likely to be induced by the change of oxide forming mechanism due to diffusion of boron from the braze. On the contrary, the joint brazed with BNi-5 showed the good oxidation resistance during the cyclic oxidation test. It seems that the oxidation can be retarded by the formation of stable $Al_2 O_3$ layer at the surface.