• Tuberculosis and Respiratory Diseases
• /
• 제59권4호
• /
• pp.374-379
• /
• 2005

배 경 : 폐확산능 ($D_LCO$)과 폐용적을 보정한 확산계수($D_LCO/VA$; KCO)는 폐포용적이 비 정상적인 경우 차이가 생긴다. 그러나, 기류제한으로 비 정상적인 폐포용적을 가지는 환자에서 이러한 차이의 의미는 연구되지 않았다. 본 연구는 기류제한이 있는 환자에서 기류제한의 호전에 따른 폐확산능과 확산계수의 변화를 연구하고자 한다. 방 법 : 기류제한이 있는 환자에서 기저 폐기능과 더불어 폐확산능을 측정하고, 일회호흡 $CH_4$ 희석법으로 폐포용적을 측정하였다. 기저치에 따라서 환자는 다음의 두 군으로 나누었다. 확산계수(예측치에 대한 백분율)와 확산능(예측치에 대한 백분율)의 비가 115%를 넘는 경우를 고차이군으로 하였고, 115% 미만인 경우를 저차이군으로 하였다. 기류제한을 치료 한 후 폐기능검사와 폐확산능을 반복해서 측정하였다. 결 과 : 고차이군과 저차이군의 기저 폐기능은 유의한 차이가 관찰되지 않았다. 두 군 모두 확산계수의 예측치에 대한 백분율은 평균 113%와 100%로 정상범위였다. 치료 후 추적 폐기능에서 $FEV_1$과 FVC는 저차이군에 비해 고차이군에서 증가하였다. 고차이군에서 치료 후 측정한 폐기능은 기저치에 비해 폐확산능과 폐포용적은 증가하였으나 저차이군에서는 유의한 차이는 관찰되지 않았다. 전폐용적과 잔기량은 치료 전후에 양군 모두에서 유의한 차이가 관찰되지 않았다. 결 론 : 기류제한이 있는 환자에서 확산계수는 정상 범위에 있지만 확산능이 감소한 경우 확산능이 감소하지 않은 환자에 비해 가역적인 기류폐색이 클 것으로 예측할 수 있다.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.18-26
• /
• 2012

Though electricity consumption amount in industry has been increased gradually, corresponding power supply show symptoms of marginal point. Importance of demand-side management from large-industries has also been raised. This paper deals with induction motor, which is one of representative examples of heavy electricity consumption utilities, to analyze potential technical capability, economic feasibility from consumers' viewpoint and demand-side management feasibility from nation-wide perspective. Nation-wide economic feasibility analysis was done through California test, which has been used as demand-side management evaluation model. This paper also describes limitation of existing high efficiency induction motor in terms of contribution to demand-side management and utilizes premium motor to calculate demand-side management contribution level and economic feasibility evaluation. Likewise, this paper emphasizes the efficiency improvement of induction motor and analyzes how much premium motor related technologies can contribute to demand-side management.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.234-238
• /
• 1995

MgFe2O4 formation, grain growth in Fe2O3, Fe solid-solution limit in MgO for MgO-Fe2O3 mixture were studied by means of investigating the distribution of phases and compositions in reaction area between MgO and Fe2O3. The reaction area at equlibrium was composed with MgO-FexO matrix and MgFe2O4 precipitation, MgFe2O4 was formed by precipitating from MgO-FexO matrix dependent on oxygen partial pressure. Fe contents was exponentially decreased with diffusion distance in MgO single crystal, and thus Fe solid-solution limitation in MgO was about 4mol%. The grain growth rate in Fe2O3 base was increased with Mg contents diffused from MgO single crystal.

• 한국환경보건학회지
• /
• 제22권1호
• /
• pp.99-106
• /
• 1996

The purpose of this study is to observe a specific removal efficiency of synthethetic wastewater which is managed by upflow submerged type at porous media which was sinteringed on a comparative low temperature 600$\circ$C, was annexed slag and humus soil with main material kaolinite. Observing removal efficiency quality of each media, a mixed media of kaolinite and humus soil by gravity percent 60, 40% respectively showed the most excellent removal utility, and applied predictive models for suspended culture kinetics without consideration diffusion limitation, and when analyzed kinetic which had been processed by this study the removal efficiency accompanied by carbon, nitrogen, phosphorous volumetric loading rate variation standed for a comparative large change rate 61~71%, it means the selection of the most proper load factor had a great effect on the highly removal efficiency, yield coefficient(Y) and specific microbial attach equation showed 1.53 mgVSS/mgCOD, $m_p=10039.4\times ((S_0)/(6.75+S_0))$ repectively.

• 한국연소학회지
• /
• 제9권4호
• /
• pp.35-46
• /
• 2004

Activation energy asymptotics (AEA) for Linan#s premixed-flame regime is revisited in this paper. First, the detailed AEA procedure for the premixed-flame regime is demonstrated, so that the practitioners of AEA could easily apply the method to their own problems. In addition, the controversies surrounding the premixed-flame regime, namely the closure controversy and fast-time instability paradox, are explained. Finally, the limitation of AEA, mainly arising from the wrong prediction of fuel leakage through the reaction zone, is examined and the Zel#dovich-Linan kinetics is introduced as an alternative to meet the needs of modern combustion analysis, where the detailed chemical structure of flame is demanded.

• Journal of Microbiology and Biotechnology
• /
• 제13권3호
• /
• pp.332-337
• /
• 2003

Enzyme kinetics data play a vital role in the design of reactors and control of processes. In the present study, kinetic studies on pectinases were carried out. Partially purified polymethylgalacturonase (PMG) and polygalacturonase (PG) were the two pectinases studied. The plot of initial rate vs. initial substrate concentration did not follow the conventional Michaelis-Menten kinetics, but substrate inhibition was observed. For PMG, maximum rate was attained at an initial pectin concentration of 3 g/l, whereas maximum rate was attained when the initial substrate concentration of 2.5 g/l of polygalacturonic acid for PG I and PG II. The kinetic data were fitted to five different kinetic models to explain the substrate inhibition effect. Among the five models tested, the combined mechanism of protective diffusion limitation of both high and inhibitory substrate concentrations (semi-empirical model) explained the inhibition data with 96-99% confidence interval.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.705-711
• /
• 1996

For the efficient production of 2, 5-diketo-gluconic acid (2, 5-DKG) by the immobilized cells of Erwinia herbicola, basic characteristics of 2, 5-DKG fermentation were analyzed and a process employing immobilized cell reactor was developed. The immobilized cells appeared to have diffusion limitation, and a maximum production of 2, 5-DKG was accomplished with 2 mm diameters of immobilized beads. Long-term stabilities of the immobilized cells could be maintained by addition of 1.75% (w/v) polypep- tone. Repeated batch fermentations with about 80 mol% of 2, 5-DKG yields were carried out six times in the fluidized bubble column reactors filled with immobilized cells at an aeration rate of 6 vvm.

• 통상정보연구
• /
• 제6권3호
• /
• pp.81-99
• /
• 2004

Research relevant to the electronic commerce tends to either overestimate or underrate the role of Information and Communication Technology (lCT). There is both technological skepticism within the social science circles and technical optimism within the engineering and computing field. Each perspective seems to have a limitation in adequately explaining the phenomenon of electronic commerce diffusion. Therefore, this research attempts to explore major characteristics of Web-based shopping systems as enablers of new business, concerning both the technical and business aspects in contemporary electronic commerce settings. On this basis, this paper addresses a configuration model of WBSS on the harmonious perspective concerning both the technical and business issues. It is our hope that both technical perspective and business perspective for exploring WBSS's configuration model presented in this paper can be an initial step towards a more balanced debate of ICT role, for electronic commerce.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• 센서학회지
• /
• 제24권4호
• /
• pp.274-279
• /
• 2015

This paper describes optimizing fabrication methods for 2-axis electrically levitated MEMS gyroscope. Electrostatically levitated gyroscope has very high potential of performance due to the fact that its proof mass is not mechanically bound to any other structures, but its complex structure and difficulty of fabrication holds back the research that only a few researches have been reported. In this work, fabrication method for glass-silicon-glass 3-floor structure for 2-axis electrically levitated MEMS gyroscope is presented, including simplified multi-level glass etch method utilizing photoresist attack, preventing metal diffusion by adding middle layer of metal electrode, overcoming Deep RIE limitation by separate fabrication of silicon structures and keeping the electrode safe from dicing debris.