• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.87-94
• /
• 2002

본 연구는 고주파 가열에 의한 산벚나무, 소태나무, 서어나무, 굴참나무, 박달나무, 고로쇠나무, 피나무, 소나무, 리기다 소나무, 참오동나무의 휨가공성을 평가해 보기 위하여 실시하였다. 본 연구에서 휨가공을 위한 곡율반경은 휨틀의 곡율반경에 의해 4 cm, 6 cm, 10 cm으로 구분하고, 대철의 두께는 0.6 mm와 0.8 mm로 구분하였다. 본 연구결과 소태나무, 서어나무, 박달나무, 고로쇠나무는 모든 곡율반경에서 100% 성공률을 나타내었다. 산벚나무와 굴참나무의 경우 58%와 83%의 성공률을 각각 나타내었다. 피나무와 오동나무의 경우 총 29%와 8%로 매우 불량하게 나타났고, 곡율반경 4 cm에서는 모두 실패로 나타났다. 침엽수재인 소나무와 리기다 소나무는 각각 44%와 56%의 성공률을 나타내었다. 대철의 두께는 휨가공성의 쉽고 어려움보다는 건조시 건조속도에 더 많은 영향을 주는 것으로 나타났다. 건조과정에서 대철두께가 얇을수록 휨가공부재의 건조 속도가 빠른 경향을 나타내었다.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.303-314
• /
• 2011

Surface albedo is an important parameter of the surface energy budget, and its accurate quantification is of major interest to the global climate modeling community. Therefore, in this paper, we consider the direct solution of kernel based bidirectional reflectance distribution function (BRDF) models for retrieval of normalized reflectance of high resolution satellite. The BRD effects can be seen in satellite data having a wide swath such as SPOT/VGT (VEGETATION) have sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning when applying semi-empirical model. This gives a difficulty to run BRDF model inferring the reflectance normalization of high resolution satellites. The principal purpose of the study is to estimate normalized reflectance of high resolution satellite (RapidEye) through BRDF components from SPOT/VGT. We use semi-empirical BRDF model to estimated BRDF components from SPOT/VGT and reflectance normalization of RapidEye. This study used SPOT/VGT satellite data acquired in the S1 (daily) data, and within this study is the multispectral sensor RapidEye. Isotropic value such as the normalized reflectance was closely related to the BRDF parameters and the kernels. Also, we show scatter plot of the SPOT/VGT and RapidEye isotropic value relationship. The linear relationship between the two linear regression analysis is performed by using the parameters of SPOTNGT like as isotropic value, geometric value and volumetric scattering value, and the kernel values of RapidEye like as geometric and volumetric scattering kernel Because BRDF parameters are difficult to directly calculate from high resolution satellites, we use to BRDF parameter of SPOT/VGT. Also, we make a decision of weighting for geometric value, volumetric scattering value and error through regression models. As a result, the weighting through linear regression analysis produced good agreement. For all sites, the SPOT/VGT isotropic and RapidEye isotropic values had the high correlation (RMSE, bias), and generally are very consistent.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.604-610
• /
• 1989

본 연구는 알루미나계 세라믹의 소결 다이아몬드 공구로 절삭시의 칩의 형태 와 절삭저항을 관찰하였다. 절삭 양식은 건식과 습식으로 하고, 여러 가지 적삭조건 에 따른 flank 마멸의 진행과정, 가공면의 표면거칠기에 미치는 영향 및 가공면의 크랙 상태를 조사형 현미경으로 확대 검출하여 가공상태를 정밀하게 조사, 측정하였 다.

• Structural Engineering and Mechanics
• /
• 제69권5호
• /
• pp.537-545
• /
• 2019

Stress analysis of bottom-hole rock has to be considered with much care to further understand rock fragmentation mechanism and high penetration rate. This original study establishes a fully coupled simulation model and explores the effects of overburden pressure, horizontal in-situ stresses, drilling mud pressure, pore pressure and temperature on the stress distribution in bottom-hole rock. The research finds that in air drilling, as the well depth increases, the more easily the bottom-hole rock is to be broken. Moreover, the mud pressure has a great effect on the bottom-hole rock. The bigger the mud pressure is, the more difficult to break the bottom-hole rock is. Furthermore, the maximum principal stress of the bottom-hole increases as the mud pressure, well depth and temperature difference increase. The bottom-hole rock can be divided into three main regions according to the stress state, namely a) three directions tensile area, b) two directions compression areas and c) three directions compression area, which are classified as a) easy, b) normal and c) hard, respectively, for the corresponding fragmentation degree of difficulty. The main contribution of this paper is that it presents for the first time a thorough study of the effect of related factors, including stress distribution and temperature, on the bottom-hole rock fracture rather than the well wall, using a thermo-poroelastoplasticity model.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.653-664
• /
• 2010

The land surface reflectance is a key parameter influencing the climate near the surface. Therefore, it must be determined with sufficient accuracy for climate change research. In particular, the characteristics of the bidirectional reflectance distribution function (BRDF) when using earth observation system (EOS) are important for normalizing the reflected solar radiation from the earth's surface. Also, wide swath satellites like SPOT/VGT (VEGETATION) permit sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning. This gives a difficulty to BRDF model based reflectance normalization of high resolution satellites. The principal objective of the study is to add BRDF modeling of high resolution satellites and to supply insufficient angular sampling through identifying BRDF components from SPOT/VGT. This study is performed as the preliminary data for apply to high-resolution satellite. The study provides surface parameters by eliminating BRD effect when calculated biophysical index of plant by BRDF model. We use semi-empirical BRDF model to identify the BRD components. This study uses SPOT/VGT satellite data acquired in the S1 (daily) data. Modeled reflectance values show a good agreement with measured reflectance values from SPOT satellite. This study analyzes BRD effect components by using the NDVI(Normalized Difference Vegetation Index) and the angle components such as solar zenith angle, satellite zenith angle and relative azimuth angle. Geometric scattering kernel mainly depends on the azimuth angle variation and volumetric scattering kernel is less dependent on the azimuth angle variation. Also, forest from land cover shows the wider distribution of value than cropland, overall tendency is similar. Forest shows relatively larger value of geometric term ($K_1{\cdot}f_1$) than cropland, When performed comparison between cropland and forest. Angle and NDVI value are closely related.

• 한국건축시공학회지
• /
• 제11권5호
• /
• pp.501-514
• /
• 2011

Recently, there have been many cases in which the difficulty of repair and replacement of principal elements in the bearing wall structure for apartment buildings, which is a major part of apartment buildings in Korea, has led to the reconstruction of buildings rather than their remodeling. To address this problem, the Korea government now allows a floor area ratio of up to 20 %, and has relaxed the building height limits to encourage the use of a rahmen structure instead of a bearing wall structure. However, since reinforced concrete rahmen structures have many problems, including higher floor height and greater construction cost, a great deal of research into rahmen composite precast concrete structures have been conducted. Green Frame, one of the developed prototypes, is expected to provide economic benefits through in-situ production for precast concrete column and beam. For in-situ production of composite precast concrete members, a detailed plan for production, curing, and installation is needed. However, it needs to be confirmed that the space is sufficient to produce the precast concrete members on-site before planning those activities. Therefore, this study proposes in-situ production analysis of composite precast concrete members of Green Frame with the evaluation of structural safety and available area on the parking structure. The result of this study shows that the in-situ production of precast concrete members is possible through a case study.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제25권4호
• /
• pp.187-195
• /
• 2014

Objectives : The objective of this study was to investigate the relationship between restricted, repetitive behaviors and interests (RRBI) and autistic symptoms in Korean high functioning autism spectrum disorder (ASD) children and to examine the structure of RRBI. Methods : Participants included 147 high functioning ASD subjects and 181 unaffected siblings. ASD subjects were divided into two groups based on the presence of RRBI. The domain scores of the Korean version of Autism Diagnostic Interview-Revised (K-ADI-R), Korean version of Asperger Syndrome Diagnostic Scale and total scores of Korean translated version of Social Responsiveness Scale, Korean version of Social Communication Scale were used for comparison of ASD symptoms between the groups. Eleven items from the RRBI domain of the K-ADI-R were used in principal axis factor analysis (PAF). Results : A statistically lower nonverbal IQ score was observed for ASD with RRBI than for ASD without RRBIs, and more social deficit, communication deficit, and behavioral and emotional problems were observed for ASD with RRBI compared to ASD without RRBI. Using PAF, two distinct factors were identified. 'Resistance to trivial changes in environment', 'Difficulty with minor changes in personal routine & environment', and 'Compulsion/ritual' were included as one factor. Conclusion : Analysis of the data suggests that the presence of RRBI in high functioning ASD is associated with a more severe presentation of autistic disorder. In addition, there appears to be heterogeneity within RRBI in autism except insistence on sameness.

• 한국자원식물학회지
• /
• 제35권6호
• /
• pp.785-795
• /
• 2022

Traditional germplasms are unsuitable for mechanized production, limiting adzuki bean production. The creation of cultivars that can be harvested by mechanized means is an urgent task for breeders. The bottom pod height (BPH), lodging resistance, and synchronous maturing of adzuki beans are critical factors for the reduction of losses due to mechanized harvesting. In this study, 14 traits of 806 adzuki bean accessions were analyzed. All growth stages and the yield, lodging score, and synchronous maturing correlated negatively with the BPH. These negative correlations reflect the increased difficulty of breeding to simultaneously satisfy the needs for no lodging, high synchronous maturing rates, BPHs > 10 cm, and high yield. We screened three germplasms with no lodging, high synchronous maturing rates, and BPHs > 10 cm that were used as mechanization-adapted breeding material for crossing with high-yield cultivars. Agronomic trait diversity in adzuki beans was also examined in this study. Principal component and cluster analyses were conducted for 806 germplasms resulting in three clusters with the yield and three growth stage traits serving as the main discriminating factors. Cluster 1 included high-yield germplasms with the number of pods per plant and the number of seeds per pod being the major discriminant factors. Cluster 2 included germplasms with long growth periods and large 100-seed weights while cluster 3 contained germplasms with high BPHs. In general, the characteristics that make mechanical harvesting feasible and those assessed in this study could be utilized to choose and enhance adzuki beans production.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.579-589
• /
• 2004

일반적인 시간 영역에서의 레이더 신호들은 표적의 관측각에 민감하게 변화한다. 이로 인하여 각도가 넓어짐에 따라서 표적 구분의 정확도가 상당히 감소하게 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 다중각도 정보를 이용하여 표적 구분 성능을 향상시키기 위한 방법을 제시한다. 먼저, 대표적인 시간영역 레이더신호인 1차원 range profile로부터 central moments와 PCA를 결합하여 특성백터를 추출한다. 추출된 특성백터에 다중 각도 정보를 사용하는 구분기를 적용시켜 넓은 관측각에서 표적 인식 성능을 향상시킬 수 있다. 다중 각도정보를 이용하는 기법에는 독립방식과 종속방식이 있으며, 본 논문에서는 두 기법의 성능을 비교한다. 성능 비교 실험에는 포항공대 단축거리 무반향실에서 측정된 여섯 개의 항공기 모델에 대한 레이더가 단면적 데이터가 이용된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.46-48
• /
• 2005

This paper discusses a probabilistic method for power system security assessment. The security analysis relates to the ability of the electric power systems to survive sudden disturbances such as electric short circuits or unanticipated loss of system elements. It consists of both steady state and dynamic security analyses, which are not two separate issues but should be considered together. In steady state security analysis including voltage security analysis, the analysis checks that the system is operated within security limits by OPF (optimal power flow) after the transition to a new operating point. Until now, many utilities have difficulty in including dynamic aspects due to computational capabilities. On the other hand. dynamic security analysis is required to ensure that the transition may lead to an acceptable operating condition. Transient stability, which is the ability of power systems to maintain synchronism when subjected to a large disturbance. is a principal component in dynamic security analysis. Usually any loss of synchronism may cause additional outages and make the present steady state analysis of the post-contingency condition inadequate for unstable cases. This is the reason for the need of dynamic studies in power systems. Probabilistic criterion can be used to recognize the probabilistic nature of system components while considering system security. In this approach. we do not have to assign any predetermined margin of safety. A comprehensive conceptual framework for probabilistic static and dynamic assessment is presented in this paper. The simulation results of the Western System Coordinating Council (WSCC) system compare an analytical method with Monte-Carlo simulation (MCS).