• Journal of Microbiology and Biotechnology
• /
• 제16권11호
• /
• pp.1720-1727
• /
• 2006

To set up a kinetic model that can provide a theoretical basis for developing a new mathematical model of the Cr(VI) biosorption column using brown seaweed Ecklonia biomass, a differential reactor system was used in this study. Based on the fact that the removal process followed a redox reaction between Cr(VI) and the biomass, with no dispersion effect in the differential reactor, a new mathematical model was proposed to describe the removal of Cr(VI) from a liquid stream passing through the differential reactor. The reduction model of Cr(VI) by the differential reactor was zero order with respect to influent Cr(IlI) concentration, and first order with respect to both the biomass and influent Cr(VI) concentrations. The developed model described well the dynamics of Cr(VI) in the effluent. In conclusion, the developed model may be used for the design and performance prediction of the biosorption column process for Cr(VI) detoxification.

• 대한전자공학회논문지
• /
• 제9권4호
• /
• pp.33-37
• /
• 1972

징분특성을 갖는 증폭회로, 즉 전압이득이 복소주파수에 비례하는 증폭회로에 대하여 논술하였다. 트랜지스터의 누레이터-노레이터 모델에 의거하여 구성한 회로의 특성이 상세한 해석의 결과와 부합되며 또 측정된 실제의 특성이 이론과 일치함을 밝혔다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제12권4호
• /
• pp.237-251
• /
• 2005

In this paper, a new wavelet analysis of differential operator spline is generated, and it is of the symmetry and (3 -$\epsilon$ )-order regula.ity (0 < $\epsilon$ < 3). Finally, using this wavelet basis, we expand Lebesgue square integrable functions efficiently and quickly.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.283-303
• /
• 2015

To research and analyze the differential settlements of foundations specifically, site investigations of existing railways and metro were firstly carried out. Then, the centrifugal test was used to observe differential settlements in different position between foundations on the basis of investigation. The theoretical model was established according to the stress diffusion method and Fourier method to establish an analytical solution of embankment differential settlement between different foundations. Finally, theoretical values and experimental values were analyzed comparatively. The research results show that both in horizontal and vertical directions, evident differential settlement exists in a limited area on both sides of the vertical interface between different foundations. The foundation with larger elastic modulus can transfer more additional stress and cause relatively less settlement. Differential settlement value decreases as the distance to vertical interface decreases. In the vertical direction of foundation, mass differential settlement also exists on both sides of the vertical interface and foundation with larger elastic modulus can transfer more additional stress. With the increase of relative modulus of different foundations, foundation with lower elastic modulus has larger settlement. Meanwhile, differential settlement is more obvious. The main error sources in theoretical and experimental values include: (a) different load form; (b) foundation characteristics differences; (c) modulus conversion; (d) effect of soil internal friction.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.229-234
• /
• 1998

We study on a terrain contour matching algorithm using Radial Basis Functions(RBFs) for aided inertial navigation system for position fixing aircraft, cruise missiles or re-entry vehicles. The parameter optimization technique is used for updating the parameters describing the characteristics of an area with modified Gaussian least square differential correction algorithm and the step size limitation filter according to the amount of updates. We have applied the algorithm for matching a sampled area with a target area supposed that the area data are available from Radar Terrain Sensor(RTS) and Reference Altitude Sensor(RAS)

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.793-810
• /
• 2015

The TWINE is a new Generalized Feistel Structure (GFS) lightweight cryptosystem in the Internet of Things. It has 36 rounds and the key lengths support 80 bits and 128 bits, which are flexible to provide security for the RFID, smart cards and other highly-constrained devices. Due to the strong attacking ability, fast speed, simple implementation and other characteristics, the differential fault analysis has become an important method to evaluate the security of lightweight cryptosystems. On the basis of the 4-bit fault model and the differential analysis, we propose an effective differential fault attack on the TWINE cryptosystem. Mathematical analysis and simulating experiments show that the attack could recover its 80-bit and 128-bit secret keys by introducing 8 faulty ciphertexts and 18 faulty ciphertexts on average, respectively. The result in this study describes that the TWINE is vulnerable to differential fault analysis. It will be beneficial to the analysis of the same type of other iterated lightweight cryptosystems in the Internet of Things.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.43-50
• /
• 2004

Percentage differential characteristic relaying(PDR) has been recognized as the principal basis for power transformer protection. Second harmonic restraint PDR has been widely used for magnetizing inrush in practice. Nowadays, relaying signals can contain 2nd harmonic component to a large extent even in a normal state, and 2nd harmonic ratio indicates a tendency of relative reduction because of the advancement of material. Further, as the power system voltage becomes higher and more underground cables are used, larger 2nd harmonic component in the differential current under internal fault is observed. And then, conventional 2nd harmonic restraint PDR exposes some doubt in reliability. It is, therefore, necessary to develop a new algorithm for performance improvement of conventional protective relaying. This paper proposes an advanced protective relaying algorithm by using voltage-current trend and flux-differential current slope characteristic. To evaluate the performance of the proposed algorithm, we have made comparative studies of PDR, fuzzy relaying and DWT relaying. The paper is constructed power system model including power transformer, utilizing the WatATP, and data collection is made through simulation of various internal faults and inrush. As the results of test, the new proposed algorithm was proven to be faster and more reliable.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.333-339
• /
• 1987

A modern kinetic evaluation method for nonisothermal reactions measured with Differential Scanning Calorimetry(DSC) is presented. It is based on multiple linear regression analysis using a number of curve points in a selectable range of conversion. The obtained kinetic data are the basis to compute a reaction process under any condition e.g. isothermal or adiabatic. The DSC measurements was performed on a Mettler TA3000 SYSTEM with the built in evaluation software. Mainly the following reactions are discussed: vulcanization of natural rubber compounds containing vulcanizing accelerators. The purpose of this work is to analyse the vulcanization kinetics of typical NR vulcanization systems using DSC. These systems were chosen because they are typically reactive elastomer and are commercially important.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1053-1058
• /
• 2012

In this study, soundscape was analyzed through physical measurement and social surveys. The results showed that, soundscape components were related to functional partitions and tourist activities, at the same time influenced by ambient noise. The sound pressure levels showed daily regular changes. Semantic differential analysis showed that the evaluation of the soundscape in urban park was rather complicated. It was still possible to identify major factors including relaxation, spatiality and environment. The results provided theoretical basis for improving urban park soundscape, and called attention to this problem.

• 한국농공학회지
• /
• 제28권1호
• /
• pp.68-74
• /
• 1986

The governing differential equations and the boundary conditions for the free vibra- tion of the unsymmetric parabolic arch with fixed ends are derived on the basis of the equilibrium equations and the D'Alembert principle. The effect of the rotary inertia as well as the extensional and the flexural deformations is considered in the governing differential equations. A trial eigenvalue method is used for determining the natural frequencies. The Ru- uge-Kutta method is used in this method to perform the integration of the differential equations. The detailed studies are made of the lowest three vibration frequencies for the par- abolic chord length equal to 10m. The effect of the rotary inertia is analyzed and it's numerical data are presented in table. And as the numerical results the frequency versus the rise of arch and the radius of gyration are presented in figures.