• 한국음향학회지
• /
• 제38권2호
• /
• pp.240-245
• /
• 2019

본 논문은 수중 음향센서 데이터의 원거리 케이블 전송에 관한 연구 결과이다. LVDS(Low Voltage Differential Signaling) 전송 방식으로 설계된 데이터 송수신기의 케이블에 대한 원거리 전송 신호를 측정하고 지터 특성을 분석하였다. 지터 특성을 저감하기 위하여, 원거리 전송에 따라 감쇠될 송신 신호를 역 보상하는 고역 강조(pre-emphasis) 기법을 적용하였으며, 전송 거리에 따라 송신 특성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1407-1409
• /
• 1999

Distance relay is being used for transmission line protection. Recently, current differential relay is used with high reliability in power system. This kind of relay is reported that it has a reliable detection ability, even so high impedance faults take place in transmission line. Therefore it is expected to use and expand widely in many utilities. Tripping of the relay is decided according to the difference between differential and restraint current. However the tripping criterion can be changed by the manufacturers. This paper presents an operational scheme of current differential relay for transmission line protection with graphical model. It is developed for educational purpose for students interesting in power system and protection engineer in utility. MATLAB is used to establish the models.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.1-7
• /
• 2017

The power train of a concrete truck mixer reducer includes differential planetary gears to get a large reduction ratio for operating the mixer drum in a compact structure. These differential planetary gears are a very important part of the mixer reducer where strength problems are the main concern. Gear bending stress, gear compressive stress and scoring failure are the main concerns. Many failures in differential planetary gears are due to the insufficient gear strength and resonance problems caused by major excitation forces such as gear mating failure in the transmission. In the present study, where the excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate differential planetary gear critical speeds. Mode shapes and natural frequencies of the differential planetary gears are calculated by CATIA V5. These are used to predict gear resonance failures by comparing the working speed range with the critical speeds due to the gear transmission errors of the differential planetary gears.

• ETRI Journal
• /
• 제34권6호
• /
• pp.800-806
• /
• 2012

Transmission performances of direct detection-based 100-Gb/s modulation formats are investigated and compared for metro area optical networks. The effects of optical signal-to-noise ratio sensitivity, chromatic dispersion, cross-channel nonlinearity, and transmission distance on the performance of differential 8-ary phase-shift keying (D8PSK), differential phase-shift keying plus three-level amplitude-shift keying (DPSK+3ASK), and dual-carrier differential quaternary phase-shift keying (DC-DQPSK) are evaluated. The performance of coherent dual-polarization quadrature phase-shift keying (DP-QPSK) with block phase estimation and coherent DP-QPSK with digital differential detection are also presented for reference. According to our analysis, all three direct detection modulation formats could transmit a 100-Gb/s signal over several hundred kilometers of a single-mode fiber link. The results also show that DC-DQPSK outperforms D8PSK and DPSK+3ASK, and the performance of DC-DQPSK is comparable to that of coherent DP-QPSK with digital differential detection. The maximum transmission distance of DC-DQPSK is over 1,000 km, which is enough distance for metro applications.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.925-930
• /
• 2013

The fault current of the power transmission system is greater than that of the power distribution system. Therefore, the introduction of superconducting fault current limiter (SFCL) is more needed to reduce the increased fault current. The trigger-type SFCL consists of the high-temperature superconducting element (HTSC), the current limiting reactor (CLR) and the circuit breaker (CB). The trigger-type SFCL can be used to supplement the disadvantages of the resistive-type SFCL. The operation characteristics of the current ratio differential relay which is usually applied to the protection device of the power transmission system are expected to be affected under fault conditions and the applicability of the trigger-type SFCL. In this paper, we analyzed the operating characteristics, by the fault conditions, between the current ratio differential relay for line protection and the trigger-type SFCL in the power transmission system through the PSCAD/EMTDC simulation.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1729-1742
• /
• 2017

In designing System Protection Schemes (SPSs) in power systems, protecting transmission network against extreme undesired conditions becomes a significant challenge in mitigating the transmission line overloading. This paper presents an intelligent Special Protection and Control Scheme (SPCS) using of Differential Evolution with Adaptive Mutation (DEAM) approach to obtain the optimum generation rescheduling to solve the transmission line overloading problem in system contingency conditions. DEAM algorithm employs the attraction-repulsion idea that is applied in the electromagnetism-like algorithm to support the mutation process of the conventional Differential Evolution (DE) algorithm. Different N-1 contingency conditions under base and increase load demand are considered in this paper. Simulation results have been compared with those acquired from Genetic Algorithm (GA) application. Minimum severity index has been considered as the objective function. The final results show that the presented DEAM method offers better performance than GA in terms of faster convergence and less generation fuel cost. IEEE 30-bus test system has been used to prove the effectiveness and robustness of the proposed algorithm.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.170-178
• /
• 2004

Continuously variable transmission (CVT) mechanisms considered here are input coupled types that combine the functions of a 2K-H II type differential gear and a V-belt type continuously variable unit (CVU). For the 8 different mechanisms, 4 of them are power-circulation modes while the other 4 are power-split modes, various performance analysis (speed ratios, power flows, divisions of power transmission in a differential gear and a CVU, and theoretical efficiencies) are performed to vary design parameters. Experimental studies are executed to validate fundamental relations (speed ratios, power flows, efficiencies, occurrence of geared neutral). Some useful characteristics associated with performance also are discussed in the mechanisms.

• 한국전자파학회지:전자파기술
• /
• 제14권1호
• /
• pp.35-42
• /
• 2003

Differential signaling has become a popular choice for high-speed interconnection schemes on Printed Circuit Boards (PCBs), offering superior immunity to external noise. However, conventional differential transmission lines on PCBs have problems, such as crosstalk and radiated emission. To overcome these, we propose a Twisted Differential Line (TDL) structure on a multi-layer PCB. Its improved immunity to crosstalk noise and the reduced radiated emission has been successfully demonstrated by measurement. The proposed structure is proven to transmit 3 Gbps digital signals with a clear eye-pattern. Furthermore, it is subject to much less crosstalk noise and achieves a 13 dB suppression of radiated emission. Index Terms - Twisted Differential Line, Differential Signaling, Crosstalk, Radiated Emission, Transmission Line, Twisted Pair

• 전자공학회논문지
• /
• 제50권2호
• /
• pp.47-53
• /
• 2013

본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스 계산 방법을 적용하여 설계 변경 방법을 제안하고 신호 전달 특성을 개선하였다. 3차원 FEM(Finite Elements Method) 전자기장(Electromagnetic Field) 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 계산하고, 신호 전달 특성을 분석한다. 차동 임피던스는 Odd mode 임피던스를 이용하여 계산되므로 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스 값이 필요하다. 따라서 시뮬레이터를 이용하여 SATA 커넥터의 각각의 값을 추출하여 차동 임피던스를 계산하였고, 이 값은 $107.3{\Omega}$으로 설계 사양을 만족하지 못하였다. 신호 전달 특성 개선을 위해서 SATA 커넥터의 핀을 $d_x$, $d_y$ 방향으로 설계 변경하고, 각 경우의 신호 전달특성과 차동 임피던스를 분석하였다. $d_y=0.1mm$의 경우에서 신호 전달 특성이 가장 우수하게 나타났고, 차동 임피던스가 $98.7{\Omega}$으로 정합되었다. 이때, 반사손실은 1.5 GHz에서 15 dB 개선되었다.

• 대한전자공학회논문지SD
• /
• 제46권10호
• /
• pp.70-78
• /
• 2009

본 논문에서는 고속 저전압 차동 신호(Low-Voltage Differential Signaling, LVDS) 전송방식의 응용을 위한 전송선 분석 및 설계 최적화 방법을 제안한다. 차동 전송 경로 및 저전압 스윙 방법의 발전으로 인해 저전압 차동 신호 전송방식은 데이터 통신 분야, 고 해상도 디스플레이 분야, 평판 디스플레이 분야에서 매우 적은 소비전력, 개선된 잡음 특성 및 고속 데이터 전송률을 제공한다. 본 논문은 차동 유연성 인쇄 회로 보드(flexible printed circuit board, FPCB) 전송선에서 선 폭, 선 두께 및 선간격과 같은 전송선 설계 변수들의 최적화 기법을 이용하여 직렬 접속된 전송선에서 발생하는 임피던스 부정합과 신호 왜곡을 감소시키기 위해 개선 모델과 개발된 수식을 제안한다. 이러한 차동 FPCB 전송선의 고주파 특성을 평가하기 위해 주파수 영역에서 전파(full-wave) 전자기 시뮬레이션 및 시간 영역 시뮬레이션을 각각 수행하였다. 본 논문에서 제안하는 방법은 저전압 차동 신호 방식의 응용을 위한 고속 차동 FPCB 전송선을 최적화하는데 매우 도움이 되리라 믿는다.