• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.440-447
• /
• 2002

본 연구에서는 호흡량 측정에 영향을 주는 요인들로부터 정확한 유량을 산출해내는 방법에 대해 고찰하고, 마취용 인공호흡기에 적용하여 수술환자의 호홉특성을 알아내는 호흡측정기를 구현하였다. 차동압력형 유량센서를 이용하여 압력, 온도, 가스구성의 상관관계에 따라 호흡량을 계측하였으며, 휴대형 기기에 적합하도록 전력 효율을 최대화 할 수 있게 시스템을 설계하였다. 구현 시스템은 크게 아날로그 인터페이스(analog interface)부, 신호처리부, 그리고 화면출력부로 나눌 수 있다. 아날로그 인터페이스부는 차동 압력 유량 센서와 차동 압력 센서로 구성된다. 전력소모를 최소화하기 위하여 여러 가지 기능을 단일소자로 수행할 수 있고, 저전력의 8비트 RISC 계열인 AVR프로세서를 중앙처리장치로 선택하였다. 데이터 전송부에서는 직렬(serial)통신(RS232, SPI)으로 측정된 값들의 출력 파형을 PC화면에 표시하거나 마취기로 전송한다. 차동 압력과 유량의 비선형적 관계를 선형화하였고, 센서 보정 기능은 일정 주기로 보정을 자동적으로 수행함으로써, 보다 안정적인 동작이 가능하게 한다. 아날로그 필터와 고속의 디지털 신호처리 알고리즘 구현으로 생체신호의 노이즈를 줄일 수 있었다. 작고, 가벼우며, 저전력인 시스템의 특징은 응급 환자나 이동중인 환자에게 적용될 수 있으며, 가래, 침, 습기와 같은 이물질에 영향이 적은 유량 센서의 사용으로 점액의 발생이 많은 마취기에서 유용하게 사용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.421-424
• /
• 2008

The real time modeling of dynamic system on adaptive control system is very important for flying control system(FCS). Using traditional method, it is required much calculation load for integral/differential at control system. Therefore, It is very important theme of study in these days to find algorithms for integration/differential at FCS. These algorithms for integral/differential influence strongly stability/reliability to control flying object. In this paper, we present optimal predictive sampling time for reduce calculation load at FCS and optimal predictive time on general cost function by applying adaptive control method.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.681-688
• /
• 2012

This paper presents the application of Differential Evolution (DE) algorithm to obtain a solution for Bid Based Dynamic Economic Dispatch (BBDED) problem including the transmission losses and to maximize the social profit in a deregulated power system. The IEEE-30 bus test system with six generators, two customers and two trading periods are considered under various bidding strategies in a day-ahead electricity market. By matching the bids received from supplying and distributing entities, the Independent System Operator (ISO) maximize the social profit, (with the choices available). The simulation results of DE are compared with the results of Particle swarm optimization (PSO). The results demonstrate the potential of DE algorithm and show its effectiveness to solve BBDED.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.214-219
• /
• 2000

This paper presents a recoil and counter recoil motion measurement system using linear variable differential transformers (LVDT). The output of the LVDT is obtained from the differential voltage of the secondary transformers. Since a transducer core is attached to the motion body, the output is directly proportional to the movement length of the core. Displacement, velocity and acceleration are measured from the LVDT. With a comparison between the measurement result and the reference value obtained by the highly accurate Vernier calipers, it is proved that the measurement system with the LVDT is applicable to the test of the moving part of the mechanism with better accuracy.

• 설비공학논문집
• /
• 제20권3호
• /
• pp.175-180
• /
• 2008

Flow quantity to supply to a coil in floor heating system is important to achieve comfortable indoor air condition in the winter season. The hot water header is used to distribute the water into the coil. Experimental study has been performed using the water header that have 5 branches consisted of flow control valves and automatic shut-off valves. Each branch line connected it with X-L pipe. Experimental tests accomplished it to investigate the flow distribution characteristics of the hot water header. Experimental results show that the selection of the pump head and differential pressure are very important to save running energy of the system, and high differential pressure needs more friction loss in the case of suitable differential pressure for balancing of the header.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.45-51
• /
• 2014

Distribution system is a critical link between customer and utility. The control of power loss is the main factor which decides the performance of the distribution system. There are two methods such as (i) distribution system reconfiguration and (ii) inclusion of capacitor banks, used for controlling the real power loss. Considering the improvement in voltage profile with the power loss reduction, later method produces better performance than former method. This paper presents an advanced evolutionary algorithm for capacitor inclusion for loss reduction. The conventional sensitivity analysis is used to find the optimal location for the capacitors. In order to achieve a better approximation for the current candidate solution, Opposition based Differential Evolution (ODE) is introduced. The effectiveness of the proposed technique is validated through 10, 33, 34 and85-bus radial distribution systems.

• 유공압시스템학회논문집
• /
• 제5권1호
• /
• pp.13-19
• /
• 2008

The typical hydraulic system of hoist is composed of a hydraulic supply unit, a directional control valve, counter balance valve, and flow control valves. The flow capacity coefficients of flow control valves should be adjusted so that the hoist is operated at moderate speed and the hydraulic energy loss is minimized. However, it is difficult to adjust the flow coefficients of flow control valves by trial and error for optimal operation. Here, the steady state model of the hoist hydraulic system including the differential cylinder circuit is derived and the optimal flow capacity coefficients of flow control valves are obtained using the complex method that is one kind of constrained direct search method.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.497-502
• /
• 1997

Automation facilities of greenhouses have been continuously developed. However, the conventional two-stage worm gear reducer reveals some problems, including low transmission efficiency. The worm gear reducer also have some difficulties in manufacturing and short life. Therefore, this study was performed to develop a planetary gear reducer, having a high Sear reduction ratio and high torque transmission efficiency. The planetary gear system consisted of a fixed ring gear and a 2-teeth differential ring gear turning slow, as the planetary pinion orbits fast around the fixed ring gear. The developed gear system can achieve a high speed reduction rate at one stage. The reducing system was employed to the greenhouse ventilation system. The reducer has the transmission efficiency of 70.5%, 2∼3 times longer life time, and twofold roll-up torque at an affordable price, comparing with conventional reducers. This reducer can be also applied to many industrial equipments, such as industrial crane, hoist, elevator and gondola etc.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.458-462
• /
• 2008

The fact that the major cases of life casualties are from smoke in the fire accidents and the expected steep increase of skyscrapers, huge spaces, multiplexes and huge scaled underground spaces demand establishment of efficient smoke countermeasure. The core technology for development of smoke management system is analysis tool of fan used in pressure differential system. The experiments on performance of sirroco-typed fan are carried out to evaluate the features of fan and present the experimental data for numerical analysis.

• Structural Engineering and Mechanics
• /
• 제34권5호
• /
• pp.549-561
• /
• 2010

In this paper, free vibration analyses of a parallel placed twin pipe system simulated by simply supported-simply supported and fixed-fixed Euler-Bernoulli beams resting on Winkler elastic soil are presented. The motion of the system is described by a homogenous set of two partial differential equations, which is solved by a simulation method called the Differential Transform Method (DTM). Free vibrations of an elastically connected twin pipe system are realized by synchronous and asynchronous deflections. The results of the presented theoretical analyses for simply supported Euler-Bernoulli beams are compared with existing ones in open literature and very good agreement is demonstrated.