• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.517-522
• /
• 2011

Global Navagation Satellite System(GNSS) is divided into Local Area Differential GNSS and Wide Area Differential GNSS. Wide Area DGNSS has more complicated structure and massage type. And transfer rate is limited, so efficient message scheduling algorithm is needed to guarantee user's accuracy and integrity. There are about 30 message types in Wide Area DGNSS. Each message type has different update interval. In this paper, the performances of message scheduling algorithm for Wide Area Differential GNSS are investigated. For all message types, results show that max update time interval requirement is satisfied.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.81-86
• /
• 2006

Routing signal lines in PCB, line shapes would be straight or bent. time-domain and frequency-domain evaluation of the signal property and interference are archived by precise Modeling of differential signal line. Some of CAD tools can extract equivalent circuit model parameters. but it takes a long time and heavy loads. This paper introduces a basic RLC equivalent circuit model parameter extraction technique for bent differential structures using genetic algorithm by this technique, we can model equivalent circuit of bent differential structures more faster.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.1
• /
• pp.121-125
• /
• 2007

Differential cryptanalysis and linear cryptanalysis are the most powerful approaches known for attacking many block ciphers and used to evaluating the security of many block ciphers. So designers have designed secure block ciphers against these cryptanalyses. In this paper, we present new three block cipher structures. And for given r, we prove that differential(linear) probabilities for r-round blockcipher structures are upper bounded by $p^2(q^2),\;2p^2(2q^2)$ if the maximum differential(linear) probability is p(q) and the round function is a bijective function.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.381-387
• /
• 2023

This study conducts the flow analysis on the basis of the impeller RPM of water measuring valve and differential pressure at valve inlet and outlet. The software used for the flow analysis is STAR-CCM+. In terms of the structure of the measuring valve, it has an impeller installed inside, and a metering chamber has inlet and outlet holes. The flow analysis on the water measuring valve drew the following conclusions: The flow rate and flow coefficient distribution according to the impeller RPM and differential pressure were on the linear increase. Regarding the flow field in the valve, the increased differential pressure had the highest velocity distribution, and complex flow field was generated in the measuring chamber. In particular, since the path between the inlet and outlet holes in the measuring chamber and the valve body was narrow, there was a section that had flow field interference. Given that, it showed the feature of the valve used for water measuring on the basis of the impeller RPM.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.81-89
• /
• 2004

The vibration analysis of the circular arch as a member of a structure has been an important subject of mechanics due to its various applications to many industrial fields. In particular, circular arches with variable cross section are widely used to optimize the distribution of weight and strength and to satisfy special architectural and functional requirements. The Generalized Differential Quadrature Method (GDQM) and Differential Transformation Method (DTM) were recently proposed by Shu and Zou, respectively. In this study, GDQM and DTM were applied to the vibration analysis of circular arches with variable cross section. The governing equations of motion for circular arches with variable cross section were derived. The concepts of Differential Transformation and Generalized Differential Quadrature were briefly introduced. The non-dimensionless natural frequencies of circular arches with variable cross section were obtained for various boundary conditions. The results obtained using these methods were compared with those of previous works. GDQM and DTM showed fast convergence, accuracy, efficiency, and validity in solving the vibration problem of circular arches with variable cross section.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.731-734
• /
• 2005

In this study, the design of advanced LVDS(Low Voltage Differential Signaling) I/O interface circuit with new structural low triggering ESD (Electro-Static Discharge) protection circuit was investigated. Due to the differential transmission technique and low power consumption at the same time. Maximum transmission data ratio of designed LVDS transmitter was simulated to 5Gbps. And Zener Triggered SCR devices to protect the ESD phenomenon were designed. This structure reduces the trigger voltage by making the zener junction between the lateral PNP and base of lateral NPN in SCR structure. The triggering voltage was simulated to 5.8V. Finally, we performed the layout high speed I/O interface circuit with the low triggered ESD protection device in one-chip.

• Advances in concrete construction
• /
• v.9 no.1
• /
• pp.103-113
• /
• 2020

This paper deal with the critical fluid velocity response of nanocomposite pipe conveying fluid based on numerical method. The pressure of fluid is obtained based on perturbation method. The motion equations are derived based on classical shell theory, energy method and Hamilton's principle. The shell is reinforced by nanoparticles and the distribution of them are functionally graded (FG). The mixture rule is applied for obtaining the equivalent material properties of the structure. Differential quadrature method (DQM) is utilized for solution of the motion equations in order to obtain the critical fluid velocity. The effects of different parameters such asCNT nanoparticles volume percent, boundary conditions, thickness to radius ratios, length to radius ratios and internal fluid are presented on the critical fluid velocity response structure. The results show that with increasing the CNT nanoparticles, the critical fluid velocity is increased. In addition, FGX distribution of nanoparticles is the best choice for reinforcement.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.357-367
• /
• 2020

The objective of this article is investigation of dynamic response of thick multilayer functionally graded (FG) beam under generalized dynamic forces. The plane stress problem is exploited to describe the constitutive equation of thick FG beam to get realistic and accurate response. Applied dynamic forces are assumed to be sinusoidal harmonic, sinusoidal pulse or triangle in time domain and point load. Equations of motion of deep FG beam are derived based on the Hamilton principle from kinematic relations and constitutive equations of plane stress problem. The numerical finite element procedure is adopted to discretize the space domain of structure and transform partial differential equations of motion to ordinary differential equations in time domain. Numerical time integration method is used to solve the system of equations in time domain and find the time responses. Numerical parametric studies are performed to illustrate effects of force type, graduation parameter, geometrical and stacking sequence of layers on the time response of deep multilayer FG beams.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.2
• /
• pp.255-258
• /
• 2009

Structure and Properties of sericinjam sericin extracted was investigated using SDS-PAGE electrophoresis, UV, CD, and DSC. The molecular weight and its distribution of sericinjam sericin showed broad tailing pattern. Circular dichlroism spectra showed that the structure of sericinjam sericin in solution was different with domestic one. However, differential thermal calorimetric properties are similar to each other.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1193-1204
• /
• 2011

In the present paper we consider a differential-algebraic prey-predator model with stage structure for prey and harvesting of predator species. Stability and instability of the equilibrium points are discussed and it is observed that the model exhibits a singular induced bifurcation when the economic profit is zero. It indicates that the zero economic profit brings impulse, i.e. rapid expansion of the population and the system collapses. For the purpose of stabilizing the system around the positive equilibrium, a state feedback controller is designed. Finally, numerical simulations are given to show the consistency with theoretical analysis.