• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.238-244
• /
• 1994

We numerically studied on the dark solitons propagation for initial amplitude and phase shapes in the normalized nonlinear Schr dinger equation(NLSE) which describes the propagations of optical solitons. As the propagation distance increases, odd dark solitons evolve into a black soliton and pairs of gray solitons which have a different sign of blackness, and even dark solitons evolve into pairs of gray solitons without black solitons. When there exists a black soliton and a gray soliton, even though the initial amplitude shape is same, the sign of blackness of a gray solitons determines whether they would collide or not. We could see that the energy of dark solitons evolve into a couple of solitons of different blackness since there exists a continuous range of dark solitons with arbitrary blackness parameter, and this phenomenon was more clearly seen from the change of phase shapes from that of amplitude shapes. hapes.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.619-625
• /
• 2010

The purpose of this research is to analyze the shapes of blouse with above-elbow sleeves according to arm movements. The shapes include five types of the arm movement(basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture, which were made by different adaptability of clothes. Experiments were conducted to figure out the dressed shape through 3-D measurement Vivid 910, and also to investigate the area of the shape of sleeves on the section map and the diagonal length of the block made by the basic section line in lateral part of sleeve with Rapid Form 2004, a software for 3-D shape analysis. The Data were analyzed by factor analysis, Anova, Duncan test, t-test. The results of this study were as follows: First, the area of sleeve was briefed 3 factor; front, center, back in sleeve. Second, there were different effect of arm movement, section level and part of shapes in the area of sleeve. Third, the diagonal length was briefed 4 factor; back, back-center, front-center, front. Forth, after t-test, there were statistically significant between the reach forward and lateral and between the angles of arm reach.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.93-96
• /
• 2001

Tactile display devices use an array of pins mounted in the form of a matrix to present three-dimensional shapes to the user by raising and lowering. With a denser matrix of mounted pins, it can be expected that shape identification will be become easier and the time required for identification will also become shorter, but that problems of difficulty in fabrication will arise. It is necessary to consider such trade-offs in the development of such devices. This study conducted experiments to study the effect of pin pitch on shape identification as Part of the fundamental investigation of this subject. The experiment used three tactile display devices with pin pitches of In, 2mm and 3mm for geometrical shape identification, with response time and rate of misidentification taken as the performance data. Surfaces, edgs and vertices of three-dimensional shapes were used as the shape primitives for displayed shapes and several of each type were selected for presentation. The results obtained revealed that performance has different relationships to pin pitch with different shape primitives.

• Korean Journal of Plant Taxonomy
• /
• v.53 no.1
• /
• pp.9-13
• /
• 2023

Menyanthes trifoliata L., a heterostyly plant, is an endangered species in Korea. Floral morphology has been published for M. trifoliata, but few works have concentrated on pollen dimorphism differences accompanied by floral dimorphism. Here, we conducted a comparative morphological study of two morphs to investigate a dimorphism system with Korean populations. Pollen morphological characteristics were observed with a light microscope and a scanning electron microscope. For the pin type, pollen size is 36.01 ± 2.01 ㎛, whereas for the thrum type it is 41.28 ± 2.58 ㎛ in terms of the equatorial diameter. The two morphs have a small apocolpium field at 5.62 ± 0.30 for the pin type and 6.24 ± 0.70 for the thrum type. The configuration of the aperture was tricolpate with a striate ridge in the two morphs. However, they have different pollen shapes and sizes, stigma shapes, and apocolpium sizes. M. trifoliata only has different pollen sizes and shapes between European populations and Korean populations. Nevertheless, Korean populations also show pollen dimorphism correlated with their floral dimorphism.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.409-412
• /
• 2005

Free-standing nanoporous alumina membrane microtubes with different shapes (rectangular and cylindrical tubes) and variable dimensions were easily fabricated by direct anodization of the aluminum templates of the specified shapes (strip and wire) and dimensions during the electrochemical reaction.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.109-109
• /
• 2002

Purpose： The aim of the study is to see the representation patterns of human visual cortex by perceiving some geometrical shapes. Method： 3 humans as subjects for the fMRI experiment. A classical block or box car design was used as experimental paradigm. 3 different types of fan shapes and concentric circles were presented.

• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.391-396
• /
• 2014

In this study, the strength of magnesium-GFRP/epoxy single-lap bonded joints are experimentally evaluated with different end shapes. In order to achieve this, four different single-lap joints with different end shapes are fabricated and the failure load is measured under tensile loading tests. From the test results, the single-lap joint with a square end exhibits the lowest failure load while the single-lap joint with reverse tapering and a spew fillet has the highest stress values. It has 11.1% higher failure strength than the single-lap joint with a square end.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.103-108
• /
• 2003

The control of flame shapes in a laminar pre-mixed flame has been experimentally investigated for propane/air pre-mixed laminar flames. Flames of different size and shapes are observed with heated wires or by controlling the equivalence ratio and flow rate of a mixture. The characteristics of the partitioning of a flame or the merge of flames are analyzed and explained by considering the balance between laminar flame speed and upstream mixture velocity. A combustor might be sized down while maintaining its heat production rate the same by partitioning a flame established in it. When the equivalence ratio of mixture is decreased, individual flames are merged together and the upstream mixture velocity can be practically decreased on a nozzle having opening ratio less than unity. As a result, the flame shape is to he adjusted until the newly established balanced condition is satisfied, and then. the stable combustion can be achieved again.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.699-712
• /
• 2008

The effectiveness of wavelet transform in detecting delamination damages in multilayered composite beams and plates is studied here. The damaged composite beams and plates are modeled in finite element software ABAQUS and the first few mode shapes are obtained. The mode shapes of the damaged structures are then wavelet transformed. It is observed that the distribution of wavelet coefficients can identify the damage location of beams and plates by showing higher values of wavelet coefficients at the position of damage. The effectiveness of the method is studied for different boundary conditions, damage location and size for single as well as multiple delaminations in composite beams and plates. It is observed that both discrete wavelet transform (DWT) and continuous wavelet transform (CWT) can detect the presence and location of the damaged region from the mode shapes of the structures. DWT may be used to approximately evaluate the size of the delamination area, whereas, CWT is efficient to detect smaller delamination areas in composites.