• The korean journal of orthodontics
• /
• v.42 no.1
• /
• pp.47-54
• /
• 2012

Objective: To determine and compare the frequency distribution of various arch shapes in ethnic Malays and Malaysian Aborigines in Peninsular Malaysia and to investigate the morphological differences of arch form between these two ethnic groups. Methods: We examined 120 ethnic Malay study models (60 maxillary, 60 mandibular) and 129 Malaysian Aboriginal study models (66 maxillary, 63 mandibular). We marked 18 buccal tips and incisor line angles on each model, and digitized them using 2-dimensional coordinate system. Dental arches were classified as square, ovoid, or tapered by printing the scanned images and superimposing Orthoform arch templates on them. Results: The most common maxillary arch shape in both ethnic groups was ovoid, as was the most common mandibular arch shape among ethnic Malay females. The rarest arch shape was square. Chi-square tests, indicated that only the distribution of the mandibular arch shape was significantly different between groups (p = 0.040). However, when compared using independent t-tests, there was no difference in the mean value of arch width between groups. Arch shape distribution was not different between genders of either ethnic group, except for the mandibular arch of ethnic Malays. Conclusions: Ethnic Malays and Malaysian Aborigines have similar dental arch dimensions and shapes.

• Journal of Environmental Science International
• /
• v.18 no.2
• /
• pp.221-230
• /
• 2009

In this study, a river basin with a lot of measured data such as water level, flow rate, current speed, and sediment rate from the past to now was selected and geometrical shape of a pier was re-analyzed, in order to study the effects of the flow around the pier area as well as the riverbed alternation characteristics. A finite element mesh of the entire river was prepared, and via parameter revision, the section that the pier has influence on was decided, to analyze the shape of the pier using RMA-2 and SED2D-WES models. With regards to the section that the pier has influence on, analysis was done on the four pier shapes, namely circle, square, rectangle, and octagon. The results showed that the shape with the least influence around the pier around is the octagon, followed by circle, rectangle, and square, showing the different geometrical effects that the shapes have on the pier. Furthermore, it was shown that the distribution of sediment concentration had effect from about (+) 110 m of the upstream to about (-) 130 m of the downstream, from the pier installation point. Also, it was shown after analyzing drag forces for different sediment particle distributions that the shape with the greatest drag is the octagon, followed by circle, square, and rectangle.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.448-453
• /
• 2012

This study aims to categorize age groups for shoes manufacturing including shoes size and boot tree development for Koreans. In order to carry out the research, the characteristics of different parts of foot in relation to size are analyzed according to age and sex, making use of human body measurement database. As a result of statistical analysis, it was found that the measurement items such as foot length, metatarsal tibiale, foot breadth and instep circumference of a person reached the range of standard deviation and average numerical figures of an adult group (18-24) from the age of 14 in men's case, and from 12 for women's case, which indicates the time of completion of their foot growth. Based on these findings where males of 14 years old and females of 12 are within similar measurement range to adults, it is necessary to categorize the age groups for shoe sizing system into the following four groups: males 13 years old or under, males 14 years old or over, females 11 years or under, and females 12 years or over. The proportional measurement produced by dividing each measurement item of foot parts by foot length was compared in an independent samples t-test, and there were meaningful differences according to different foot shapes of the two age groups of males 13 or under - males 14 or over, and females 11 or under - females 12 or over. Also, the independent samples t-test for the age groups of males 13 or under - females 11 or under, and males 14 or over - female 12 or over, showed similar meaningful differences, which indicates the differences in foot shapes of male and female during the period of growth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.379-387
• /
• 2012

This study investigates free vibration characteristics of new energy harvesting multi-layer block structures with different geometrical shapes using solid and shell finite elements and evaluate their piezoelectric effect on experiments. The two and three-dimensional finite element (FE) delamination models for block structures described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the entire vibration mode shape. The FE model using ABAQUS is used for studying free vibrations of multi-layer block structures for various tip mass and PZT. In particular, new results reported in this paper are focused on the significant effects of the global and local vibration modes for various parameters, such as size of block shape, existence of tip mass and hole, and location of tip mass and PZT. In addition, we evaluate the power generation capacity of developed energy block structures through a laboratory-scale experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.89-96
• /
• 2007

A volume integral equation method (VIEM) is applied for the effective analysis of plane elastostatic problems in unbounded solids containing single isotropic inclusion of two different shapes considering composite fiber volume fraction. Single cylindrical inclusion and single square cylindrical inclusion are considered in the composites with six different fiber volume fractions (0.25, 0.30, 0.35, 0.40, 0.45, 0.50). Using the rule of mixtures, the effective material properties are calculated according to the corresponding composite fiber volume fraction. The analysis of plane elastostatic problems in the unbounded effective material containing single fiber that covers an area corresponding to the composite fiber volume fraction in the bounded matrix material are carried out. Thus, single fiber, matrix material with a finite region, and the unbounded effective material are used in the VIEM models for the plane elastostatic analysis. A detailed analysis of stress field at the interface between the matrix and the inclusion is carried out for single cylindrical or square cylindrical inclusion. Next, the stress field is compared to that at the interface between the matrix and the single inclusion in unbounded isotropic matrix with single isotropic cylindrical or square cylindrical inclusion. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of inclusions. Through the analysis of plane elastostatic problems, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing inclusions considering composite fiber volume fraction.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.409-414
• /
• 2019

Silica and polymethylsilsesquioxane (PMSQ) are silicone powders widely used as cosmetics. We synthesized silica-PMSQ composites via sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors of silica and PMSQ, respectively. Shape of the composites was controlled by varying the ratios of TEOS and MTMS, which were used as silane monomers. Silica-PMSQ composites showed three different shapes, which were sphere-shape, raspberry- shape, and donut- shape. All of them had soft touch, easy water dispersion, and soft focus effect in common. However, each shape showed some differences in sense of use, adhesion, and strength of the soft focus effect. Raspberry-shape composite had the strongest soft focus effect, donut-shape one had the strongest adhesion, and sphere-shape one had the best in softness. Thus, it is concluded that by varying the ratios of TEOS and MTMS silica-PMSQ composites could be easily synthesized into different shapes, providing various functions. This method can be applied to manufacture functional cosmetics.

• Composites Research
• /
• v.27 no.3
• /
• pp.109-114
• /
• 2014

Manufacture of nancomposites has simple process for developing nanocomposites due to the increasing applications using nanofillers. This work studied nanofiller coated glass fiber for reinforcing material with good wetting and conductivity and the morphology of nanofiller coated glass fiber was analyzed by FE-SEM. The durability of reinforced glass fiber was investigated with different shapes of nanofillers using sonication rinsing method. Fatigue test was performed to evaluate the adhesion of reinforcing interface and stability of nanofiller coating layer for single fiber reinforced composites. Apparent modulus and conductivity of nanofiller coating layer were evaluated to realize multifunctional of nanocomposites. Fiber type of nanofiller was better than plate type due to better cohesion between fiber and nanofillers. At last, the stability of fiber type nanofiller of coating layer has better durability and conductivity than plate type case.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2007

The heat transfer characteristics of solar tower receivers are experimentally investigated with receiver shapes. Generally, these become different according to the shapes and materials of the volumetric air receiver. In order to study these effects, the apparatus adopting laminated mesh and honeycombs as the volumetric air receiver is proposed. The receiver consists of laminated mesh (diameter; 100 mm, thickness; 1 mm), honeycombs (diameter; 100 mm, thickness; 30 mm) inserted into ceramic tube (inside diameter; 100 mm, outside diameter; 120 mm, length: 1000 mm). To apply heat to the receiver, an electric heater is used. To find out the heat transfer characteristics of the laminated mesh, the air temperatures are obtained by installing 3 thermocouples on each layer, dividing ceramic tube into 4 layers. Also, a radiative shield is installed to measure the only air temperature. The data for laminated mesh and honeycomb thickness of 30, 60, 90 mm are obtained. The results show that the temperature of layer 3 is higher than those of layer 2 and layer 1.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.477-481
• /
• 1992

As a series of fundamental research projects to produce doenjang (Korean fermented soy paste) of better quality, two kinds of doenjang were manufactured from a traditional meju (Korean soy bean koji) and the mixed with Aspergillus oryzae and Bacillus natto, and histological changes in the cell structures of soy bean of the two were reported doenjang samples were observed and compared during the entire period of fermentation processes. Cell walls of the soy bean were ruptured by pressure and heat during the pressure cooking process and some of them were observed to have the ghost-like shapes. Remarkable differences in the plasmolysis of the cytoplasms were observed between the seed coat and the inner part of soy bean. Small vacuoles resulting from the fusion of the glycoprotein globules by protease and from the hydrolysis of the starch granules by amylase were also observed. Penetration of microorganisms was transferred from the seed coat to the inside of soy bean as the fermentation proceeded. Slimy substances were observed on the seed coat and the parenchyma cells of soy bean fermented with the mixed with Aspergillus oryzae and Bacillus natto. Cell walls of soy bean became difficult to stain and they showed unusual, polygonal shapes as the fermentation proceeded. Samples fermented with the mixed with Aspergillus oryzae and Bacillus natto showed more remarkable tendencies than traditional meju.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2465-2470
• /
• 2008

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The Numerical simulations for the 5 different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermo-aerodynamic performance for the 5 different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, Volume and Area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 [%], and the value of maximum ratio of Nusselt number augmentation is 7.05 [%] when the riblet angle is $60^{\circ}$ (Case5). The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum Volume and Area goodness factor are obtained when the riblet angle is $60^{\circ}$ (Case5).