• Tribology and Lubricants
• /
• v.17 no.2
• /
• pp.109-115
• /
• 2001

The lubricating performance of 23 kinds of polyol ester base oils 〔POEs〕 having different branch shapes was investigated by using a four ball tribometer under boundary lubrication condition. All the polyol ester base oils used in this study were made up of polyhydric alcohols of two-four valence and normal or branched fatty acids of different carbon number. The wear characteristics of polyol ester base oils are different from those of mineral oil, strongly affected by the branch shapes of fatty acids in their molecles. In particular, the polyol ester base oils having normal fatty acids such as n-octanoic acid, n-nonanoic acid etc. show much better wear performance than POEs having branched fatty acids such as 2-ethylhexanoic acid, 3,5,5-trimethyl hexanoic acid, etc. As the carbon chain length of normal fatty acids, in case of POEs of normal fatty acids, is increased, their wear rate is decreased and, in case of POEs of branched fatty acids, as the degree of branch of branched fatty acids is decreased, their wear rate is decreased. All the wear results of polyol ester base oils could be reasonably explained by comparing cohesive ability among fatty acid molecules in adsorption film by fatty acids obtained as POEs were decomposed.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1894-1899
• /
• 2007

This paper presents the thermal characteristics for micro heat exchanger with different micro-channel shapes. The shapes of micro-channel has been manufactured sheet metal by chemical etching for the I shape of straight channel and V and W shapes of chevron feature and fabricated micro plated heat exchangers using the vacuum brazing of bonding technology. The experimental study has been performed on heat transfer and pressure drop characteristics with various Reynolds number for water to water at the counter flows. The average heat transfer rate of V and W shapes has been showed about 1.5${\sim}$1.6 times large than those of I shape. For the comparison of Nusselt number, it is known that the convective heat transfer of V and W shapes represent more effect than I shape. The pressure drops of V and W shapes are about 1.2${\sim}$1.7 times lager than those of I shape.

• Smart Structures and Systems
• /
• v.16 no.5
• /
• pp.919-935
• /
• 2015

The Hilbert-Huang transform (HHT) consists of empirical mode decomposition (EMD) and Hilbert spectral analysis. EMD has been successfully applied for identification of mode shapes of structures based on input-output approaches. This paper aims to extend application of EMD for output-only identification of mode shapes of linear structures. In this regard, a new simple and efficient method based on band-pass filtering and EMD is proposed. Having rather accurate estimates of modal frequencies from measured responses, the proposed method is capable to extract the corresponding mode shapes. In order to evaluate the accuracy and performance of the proposed identification method, two case studies are considered. In the first case, the performance of the method is validated through the analysis of simulated responses obtained from an analytical structural model with known dynamical properties. The low-amplitude responses recorded from the UCLA Factor Building during the 2004 Parkfield earthquake are used in the second case to identify the first three mode shapes of the building in three different directions. The results demonstrate the remarkable ability of the proposed method in correct estimation of mode shapes of the linear structures based on rather accurate modal frequencies.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.119-124
• /
• 1999

This paper proposes an evolutionary model for automatically generating artificial creatures of various shapes and colors according to insect ecology. This model offers a novel way to naturally evolve the shapes and colors of artificial creatures. The evolutionary model used in our research is based on Genetic Algorithms (GA). In this paper, artificial Computer Graphics(CG) creatures develop into various shapes and colors according to the evolutionary model. Later, they can be used as CG animated characters. This model also solves the problem of reducing the time and labor cost for mass production of various characters. It could be used in such areas as the cavalry battle scene in Disney's animation, “Mulan”. Our approach has two steps. At first, artificial creatures move according to information gathered form the five senses. This information is also used for generating the shapes of the five sense organs[1]. Then, based on the GA, evolutionary mode[2], we prepare prototype creatures, which evolve into various shapes and different colors in alternating generations. Finally, our evolutionary model successfully generates various character shapes and colors automatically.

• Journal of the Korean earth science society
• /
• v.33 no.5
• /
• pp.395-400
• /
• 2012

One of the main problems concerning the shallow seismic survey is how to generate high frequency signals with large amplitudes using small seismic sources. If one could focus the seismic energy in the direction of the survey line, it will be much helpful in identifying the first break. In this research, we have used hammer as an impulsive source and compared the signal powers generated by different shapes of the hammer plates: circular, square, and rectangular. The experiment was conducted by calculating the power spectral density function to compare the frequency spectrum and signal power. In the direction perpendicular to the long side of the rectangular plate, the largest seismic energy with the highest frequency was achieved even with the same weights of hammer plates. Our conclusion is that it is more efficient to use a rectangular plate than a circular (or square) one when conducting a 2-D shallow seismic survey.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.701-710
• /
• 1999

To predict rain attenuation accurately, we must know scattering characteristics of rain-drops for real drop shapes. In this paper, the scattering characteristics of rain-drops are analyzed by an analytical model, and the differences in the characteristics of the forward scattering amplitudes for three different rain-drop shapes are compared. Using the results for the Pruppacher-Pitter's real rain-drop shaper, the specific rain attenuation in domestic environment is predicted, and the difference from the ITU-R model is compared and analyzed.

• Ocean Systems Engineering
• /
• v.11 no.1
• /
• pp.43-58
• /
• 2021

In the present work, a 3D numerical model is proposed to study local scouring around single vertical piers with different cross-section shapes under steady-current flow. The model solves the flow field and sediment transport processes using a coupled approach. The flow field is obtained by solving the Unsteady Reynolds Averaged Navier-Stokes (URANS) equations in combination with the k-ω SST turbulence closure model and the sediment transport is considered using both bedload and suspended load models. The proposed model is validated against the empirical measurements of local scour around single vertical piers with circular, square, and diamond cross-section shapes obtained from the literature. The measurement of scour depth in equilibrium condition for the simulations reveal the differences of 4.6%, 6.7% and 13.1% from the experimental measurements for the circular, square, and diamond pier cases, respectively. The model displayed a remarkable performance in the prediction of scour around circular and square piers where horseshoe vortices (HSVs) have a leading impact on scour progression. On the other hand, the maximum deviation was found in the case of the diamond pier where HSVs are weak and have minimum impact on the formation of local scour. Overall, the results confirm that the prediction capability of the present model is almost independent of the strength of the formed HSVs and pier cross-section shapes.

• Journal of Urban Science
• /
• v.12 no.2
• /
• pp.19-30
• /
• 2023

The seismic design of water tanks for fire protection is important to prevent secondary earthquake damages due to fires. In this study, the seismic performance of stainless steel water tanks was evaluated considering both static and dynamic water pressure effects, and the influence of different panel shapes was investigated through numerical analysis. First, a basic water tank model comprised of flat panels was built, and then water pressure distribution including sloshing effects was evaluated. In the result of structural analysis, many panels of the basic water tank exceeded a specified allowable stress for load combinations including earthquake loads. In order to reduce the bending stress of the panel by increasing the moment of inertial of the panel section, alternative shapes of a truncated quadrangular pyramid were developed. Five water tanks with different alternative panel shapes were built and analyzed for the same load combinations. Based on the results of the numerical analysis, a number of effective aspect ratios were selected and modified to increase economic feasibility through additional analysis and structural safety check.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.662-667
• /
• 2007

The thermal performance comparisons of the dish solar collector system are numerically investigated with mirror arrays and receiver shapes. In order to compare the performances of the dish solar collector systems, six different mirror arrays and four different receiver shapes are considered and the radiative heat flux distribution on the inside of the receiver is analyzed. A parabolic-shaped perfect mirror of which diameter is 1.5 m is considered as a reference of the mirror arrays. Five different mirror arrays of twelve identical parabolic -shaped mirror facets of which diameter are 0.4 m are proposed in this study. Their reflecting areas, which are 1.5 $m^2$, are the same. Four different receiver shapes are a dome, a conical, a cylindrical and a unicorn type. The solar irradiation reflected by mirrors is traced using the Monte-Carlo method. In addition, the radiative properties of the mirror surface can vary the thermal performance of the dish solar collector system so that the effects of the surface reflectivity and the surface absorptivity are considered. Based on the calculation, the design information of dish solar collector system for producing the electric power can be obtained. The results show that the dome type has the best performance in receiver shapes and the 2AND4INLINE has the best performance in mirror arrays except the perfect mirror.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.101-109
• /
• 2014

Bangryeong generally means rectangular collars at present. However, it is estimated that there would be Bangryeong in different shapes besides rectangular shape in ancient times, but there is no accurate evidence. The dispute on the shape of Bangryeong started with the records in Yegi(禮記) and Simui written during Zhou period, China, the oldest records on Bangryeong. However, there are no remains or paintings(pictorial data) accurately proving the different shapes of Bangryeong. While the new shape of Gokgeop(collar of Simui) was mentioned by Zhu Xi during Song period, it was not accurately verified. There are almost no literature, excavated objects or pictorial data on the shapes of Bangryeong which are not definitely identified. The shape of Bangryeong is identified to a certain extent by objects excavated or pictorial data during Yuan and Ming period. There will be definite reasons why Zhou Xibao and Hua Mei, the scholars in China, the y-shaped collar rolled on the chest among the objects excavated during Warring States Period as Bangryeong or Guryeong. Thus, this paper investigated the notes and description in Yegijeongui(禮記正義) and the records and notes during the Han period which are mentioned most frequently except Yegi among the records on Bangryeong. Accordingly, this paper identified that there are different shapes of Bangryeong except rectangular shape during the Han period. It is estimated that Bangyeong at that time had symmetric collars, the collars of Jikryeong which are not overlapped. The collar section after the neck section was straight. It was also said that Bangyeong was women's clothing. In other words, Bangyeong in the Han period suggests that the collar of Jikryeong was Bangryeong. As discussed above, Bangryeong has the long history and different meanings by period. However, it is very difficult to accurately define Bangryeong because there are almost no records on it. Nevertheless, Bangryeong will be discussed more in further study.