• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.595-614
• /
• 2019

In cold-formed steel (CFS) structures, such as trusses, transmission towers and portal frames, the use of back-to-back built-up CFS unequal angle sections are becoming increasingly popular. In such an arrangement, intermediate welds or screw fasteners are required at discrete points along the length, preventing the angle sections from buckling independently. Limited research is available in the literature on axial strength of back-to-back built-up CFS unequal angle sections. The issue is addressed herein. This paper presents an experimental investigation on both the welded and screw fastened back-to-back built-up CFS unequal angle sections under axial compression. The load-axial shortening and the load verses lateral displacement behaviour along with the deformed shapes at failure are reported. A nonlinear finite element (FE) model was then developed, which includes material non-linearity, geometric imperfections and modelling of intermediate fasteners. The FE model was validated against the experimental test results, which showed good agreement, both in terms of failure loads and deformed shapes at failure. The validated FE model was then used for the purpose of a parametric study to investigate the effect of different thicknesses, lengths and, yield stresses of steel on axial strength of back-to-back built-up CFS unequal angle sections. Five different thicknesses and seven different lengths (stub to slender columns) with two different yield stresses were investigated in the parametric study. Axial strengths obtained from the experimental tests and FE analyses were used to assess the performance of the current design guidelines as per the Direct Strength Method (DSM); obtained comparisons show that the current DSM is conservative by only 7% on average, while predicting the axial strengths of back-to-back built-up CFS unequal angle sections.

• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.398-405
• /
• 2016

The objective of this study was to evaluate the characteristics of melanoidins formed from black garlic (BG) after different thermal processing steps. The melanoidins formed from BG during thermal processing were produced in large amounts, and the initial (280 nm), intermediate (360 nm), and final stage product (420 nm) had similar tendencies. Compounds like degraded proteins, peptides, and phenolic acids were present in the melanoidins during thermal processing. All the melanoidin samples showed different absorptions in the UV-visible spectra, although these had similar shapes. Moreover, the carbon, hydrogen, and oxygen content of melanoidins formed from BG during thermal processing decreased initially, and then increased. However, the nitrogen content increased during thermal processing. As thermal processing progressed, the molecular weight of all the melanoidin samples showed increasing intensities, whereas the major peaks of each melanoidin sample had different retention times. Furthermore, the melanoidins formed from BG after different thermal processing steps contained -OH, -CH, amide I, and III groups. The crystallinity of the melanoidins was majorly formed at $31.58^{\circ}$ and $43.62^{\circ}$ ($2{\theta}$).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1582-1594
• /
• 2005

The purpose of this study is to rediscover the value of form in fashion design by developing a new perspective of design appreciation. By examining and modifying the theories of Wolfflin and Belong, this paper tries to of for a new perspective for analyzing the characteristics of form in fashion designers' works. The three new perspective, Flat & Rounded, Closed & Opened and Part & Whole, can be used to analyze the formative aesthetic character of Vionnet's and Dior's works. Ten of Vionnet's and eleven of Dior's representative works selected and applied Delong's visual priority diagram to analyze their character. Vionnet and Dior, emphasized form and construction in their design and applied geometric shapes in their works. The main differences between Vionnet and Dior is that Vionnet's work transforms from geometric shapes in 2-dimentional space to drapery shapes in 3-dimensional space, Dior's work displays geometric shapes in 3-dimensional space. Vionnet created new formative art through the relationship between the clothes and human body. Vionnet's work has distinctively different qualities depending on whether the space is 2-dimensional or 3-dimensional showing transposition of form. In 2-dimensional space, Vionnet's works consist of triangles, rectangles and circles which are 'flat' and 'closed' in quality. These transform to solid forms by draping bias fabrics, which have a 'rounded' and 'open' quality. Dior tended to show artificial form rather than the natural lines of the body which is very different with Vionnet. Dior created clothes by using solid geometric form such as spheres, prisms, cylinders, pyramids and cubes in 3-dimensional space, which were visualized through constructive technique such as dart manipulation, boning, gathering, tucking, pleating, shirring and layering. Dior's works have their own form which does not relate with body shape. So his Works have a 'rounded' and 'closed' quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.332-338
• /
• 2018

To perform the Maritime Safety Audi Scheme, $10^{-4}$ was constantly applied without adjustment when evaluating the proximity of the fairway. The necessity of applying the different aberrancy probabilities from the different proximity of the fairway depending on the shape of the route and the size of the ship was validated using marine simulations. Marine simulation was performed to evaluate the validity of statistical analysis-based aberrancy probability according to the different shapes of routes and ship size presented in the previous study. As results, the validity of the criterion of the statistical analysis-based aberrancy probability was confirmed by comparing with the results of simulation-based aberrancy probabilities. The results support that the aberrancy probabilities by the types of a vessel could be different based on the type and size of vessels. The results motivate that further investigation is required to find the reasonable criteria of the aberrancy probabilities for the maritime traffic safety audit according to the fairway shape and the size of the vessel.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.153-160
• /
• 2002

Two different commercial brand X-ray films are used for examining possible differences caused by different target distances when the patients are examined with highenergy X-rays. 6MV- and 15MV X-rays are tested at four different target distances. The films on which the radiation amounts are gradually increased using H$_2$O phantoms are developed by an automatic developing machine to be analysed in the image densities. Characteristic curves have similar shapes for different conditions but for the 130cm target distance. ${\gamma}$ values and average image densities per the illuminated radiation are used to analyse the differences.

• Steel and Composite Structures
• /
• v.39 no.1
• /
• pp.35-50
• /
• 2021

Eccentrically braced frames (EBFs) are utilized as a lateral resisting system in high seismic zones. Links are the primary source of energy dissipation and they are exposed to high deformation, which may lead to buckling. Web stiffeners were introduced to prevent buckling of shear link. AISC 341 provides the required vertical stiffeners for a shear link. In this study, different stiffener configurations were examined. The main objective is to improve the behavior of short links using different stiffener configurations. Pursuant to this goal, a comprehensive numerical study is conducted using ABAQUS. Shear links with different stiffener configurations were subjected to cyclic loading using loading protocol mandated by AISC 341. The results are compared in terms of energy dissipation and shear capacities and rupture index. The proposed stiffener configurations were further verified with different link length ratios, I-shapes and thickness of stiffener. Based on the results, the stiffener configuration with two vertical and two diagonal stiffeners perpendicular to each other is recommended. The proposed stiffener configuration can increase the shear capacity, energy dissipation capacity and the ratio of energy/weight up to 27%, 38% and 30%, respectively. Detailing of the proposed stiffener configuration is presented.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.38-41
• /
• 2008

Studies were processed to confirm the difference of the shiitake productivity according to different spawn shapes(sawdust, plug-shaped and liquid spawns) on middle-temperature type strain. A tendency of fruiting was similar among three treatments, and treatments inoculated with plug-shaped spawn and liquid spawn produced over 50 % of total yield until 2nd flushing period and 80 % of total yield until 4th flushing period. In investigation of deformed fruit-bodies, all of three treatments occurred until 2nd flushing period. However, in rate of deformed fruit-bodies, treatment inoculated with liquid spawn was lower than others. In investigation of yield, the amount produced on treatment inoculated with liquid spawn was 411 g per medium and it was highest among treatments. And the amount of fruit-bodies over 10 g was higher than others. Also, the number of fruit-bodies between sawdust and plug-shaped spawn was different, but each weight of fruit-bodies among three treatments was not different.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2013

ZnO with different morphologies can be used various application depending on their shapes. Different morphologies of ZnO structures were synthesized by a catalysis-free thermal evaporation process. Their morphologies were dependent on the distance from the source to substrate on the same processing condition; in the result were products morphologies of the hollow, cage and star. Their shapes and crystalinity were evaluated by SEM and XRD, respectively. This work demonstrates what kind of growth factors would be involved in the final structure morphologies.

• Clean Technology
• /
• v.20 no.3
• /
• pp.263-268
• /
• 2014

Using the CFD method, the pressure drop in 6 cyclone dust collectors of different shape were calculated. And the results were compared with results of the conventional theories. Equations of Shepherd and Lapple (1939, 1940), First (1950), Alexander (1949), Stairmand (1949), Barth (1956) were used in the theoretical calculation. In CFD calculations, we used standard k-epsilon model for analysis of turbulent flow, fluid is $25^{\circ}C$ air, the velocity at inlet is 10 m/s and the temperature is $25^{\circ}C$. In CFD analysis results, the pressure distributions along the flow showed similar patterns in different cyclone shapes. But the pressure drop distributions estimated on the conventional theories had big difference in different cyclone shapes. Only First's theory and CFD analysis showed similar results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2049-2054
• /
• 2013

Recently, magnesium hydroxide ($Mg(OH)_2$) has many applications in various field, due to its outstanding characteristics such as a nontoxic, noncorrosive and thermal stable properties. In this study, different shapes of flower and flake type magnesium hydroxide were synthesized by precipitation method at room temperature using $MgSO_4$, $MgCl_2$ and $Mg(NO_3)_2$ as magnesium sources, NaOH and $NH_3$ as alkaline sources. Influence of synthesis on the morphological characteristics, sizes and shapes of magnesium hydroxide particles, was investigated, such as different precursors and parameters. The shape of magnesium hydroxide depend on magnesium and alkali sources. Average size of flower particle had about $1{\mu}m$, and flake had about 20 ~ 50 nm. The synthesised magnesium hydroxide groups were characterized by XRD, FE-SEM, FT-IR, EDS, PSA and TG.