• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.187-191
• /
• 2006

This research is about the optical characteristics of algae which is collected from Nam-Hae for basic research of red tide remote sensing technique development 21 kinds of red tide organisms were cultivated to investigate optical characteristics of them in the level of laboratory, and chlorophyll specific absorption coefficient $(a^*)$ and backscattering coefficient $(b_b^*)$ are estimated by using spectrophotometer. Absorption spectrums according to species appeared to range from 0.005 to 0.06 $(m^2/mg)$, and the shapes of spectrums were also different. The range of $b_b^*$ appeared to be $10^{-2}\sim10^{-4}m^2/mg$, which had about 100 times differences between species, and the shape of spectrum have significant difference between species. These results will input as an ocean color model input parameter from ocean color.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.385-392
• /
• 2017

This research presents the results of a study on the trajectory characteristics of barges with different configurations. A towing experiment was carried out in a water tank with three types of barges in two cases: with and without skegs. The effects of towline length on trajectory were also observed. This study analyzed and compared the length and amplitude of trajectory shapes for each barge in various combinations. It revealed that the trajectory of a barge is influenced not only by skegs but also by the length of the towline. As a result of this work, it can be clearly seen that skegs significantly improve the course stability of a towed barge regardless of differences in bow shape or towline length. Water tank test results also indicated that the length of a towline plays a key role in affecting the trajectory characteristics of a barge-towing system. The length and amplitude of the slewing motion of a barge increased with an increase in the length of the towline connected to the barge. Validation of the present research results should be carried out by further experiments and computational comparisons in the near future.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.497-519
• /
• 2015

Kwon Kisoo is one of the most promising artist in Korea. His paintings portray a lot of metaphors and philosophies in oriental art. As an artist, he adapts both oriental and contemporary ideas to make his paintings. His main motifs are Plum blossoms, Chrysanthemum, Orchid and Bamboos. These plants are known as 'Sa-gonja' in Korean but translated as the 'Four Gracious plants' or the 'Four Gentle Plants in english'. These noble plants represent the four seasons. They grow in different weather conditions. In oriental art, these plants are considered very important for their qualities. These qualities are important attributes for gentlemen in literati painting. The drawing of the 'Four Gracious Plants' in Kwon Kisoo's paintings is simplified. He uses lines, shapes and colour to create contours of the motifs. In his paintings, there is another icon he calls 'Dongguri'. Dongguri is the main character in Kwon Kisoo's paintings. It was developed in 2002 by fast brush strokes. Dongguri is an admired character because it looks like very cute in Kwon Kisoo's paintings. Dongguri is always seen living in the midst of the 'Four Gracious Plants'. The 'Four Gracious Plants' with other landscape features like rocks and mountains are places 'Dongguri' lives. Dongguri is also often found performing a lot of actions like climbing, running, sitting etc. All these actions depict metaphors which have been unraveled in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.724-729
• /
• 2017

The crashworthiness of the fuel tank of a rotorcraft is verified through the crash impact test. The crash impact test has a high risk of failure due to the application of an excessive load, which can seriously affect the overall development schedule of the aircraft. Therefore, a lot of effort has been made to minimize the possibility of failure in the actual test by carrying out a numerical analysis of the crash impact test of the fuel tank in the initial design stage. Recently, an external auxiliary fuel tank was added to increase the cruising distance. In this study, the numerical analysis results of the crash impact test based on several different shapes of the external auxiliary fuel tank are presented, in order to evaluate its crashworthiness. For the numerical analysis, smoothed particle hydrodynamics (SPH), which is one of the fluid-structure coupled analysis methods, is applied and the test conditions prescribed by US military standards are reflected in the analysis conditions. In addition, the material property data previously obtained by the specimen test of the actual fuel tank is applied to the numerical analysis. As a result, the equivalent stress of the fuel tank material itself and the metal fitting is provided and the possibility of acquiring data for designing the crash-worthiness of the external auxiliary fuel tank is evaluated by examining the behavior and working load of the internal mounted components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.723-729
• /
• 2016

This study compared fin-tube and parallel-flow heat pipes for their sensible heat exchange rate, heat recovery amount, and air-side pressure drop. Tests were done with different refrigerant charging rates of 40-60% vol. and air flow rates of 300-1,400. The sensible heat exchange rate was highest for both types of heat pipes at a working fluid charge of 40% vol. and low flow rate. For the parallel-flow heat pipe, the 60% vol. charge is too high and results in a low sensible heat exchange rate. The reason is that the thicker liquid film of the tube wall deteriorates the heat transfer effect. Hence, the optimal charging rate is 40 to 50% vol. The evaporator heat pipe has a larger air-side pressure drop than the condenser section heat pipe. The reason is considered to be condensation water arising from the evaporator surface. Compared to the fin-tube heat pipe, the parallel-flow heat pipe showed better performance with a working fluid charging rate of 48%, volume of 41%, and an air-side pressure drop about 37%.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.10
• /
• pp.377-382
• /
• 2018

This study deals with internal state and tissue density analysis methods for red ginseng grade determination. For internal measurement of red ginseng, there have been various studies on nondestructive testing methods since the 1990s, It was difficult to grasp the most important inner hole and inside whites in the grading. So in this study, we developed a closed capturing device for infra-red illumination environment, and developed an internal measurement system that can detect the presence and diameter of inner hole and inside whites. Made devices consisted of infrared lights with a high transmission rate of red ginseng in 920 nanometer wave band, a infra-red camera and a Y axis actuator with a red ginseng automatically controlled focus on the camera. The proposed algorithm performs an auto-focus system on the Y-axis actuator to automatically adjust the sharp focus of the object according to the size and thickness. Then red ginseng is rotated $360^{\circ}$ at $1^{\circ}$ intervals and 360 total images are acquired, and reconstructed as a sinogram through Radon transform and Back-projection algorithm was performed to acquire internal images of red ginseng. As a result of the algorithm, it was possible to acquire internal cross-sectional image regardless of the thickness and shape of red ginseng. In the future, if more than 10,000 different shapes and sizes of red ginseng internal cross-sectional image are acquired and the classification criterion is applied, it can be used as a reliable automated ginseng grade automatic measurement method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.251-260
• /
• 2003

A three dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of deep, tapered rods and beams with circular cross section. Unlike conventional rod and beam theories, which are mathematically one-dimensional (1-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sup r/, u/sub θ/ and u/sub z/, in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in , and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the rods and beams are formulated, the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rods and beams. Novel numerical results are tabulated for nine different tapered rods and beams with linear, quadratic, and cubic variations of radial thickness in the axial direction using the 3D theory. Comparisons are also made with results for linearly tapered beams from 1-D classical Euler-Bernoulli beam theory.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.21-27
• /
• 2014

We analyzed response patterns of test field data acquired with new small loop electromagnetic (EM) system using three-dimensional (3D) electromagnetic modeling code. The size and shape of a conductor was adopted as experimental parameters for EM modeling to understand influencing factors of the response patterns due to a metallic object on the seafloor. Obtaining the responses for four models of difference sizes and shapes through 3D EM modeling, we confirmed that the shape of the object have a more critical factor on the response pattern than size. We also calculated "ppm" values with respect to different altitudes of the sensor and source frequencies. The modeling results show that the consistency of sensor altitude is important and imaginary part of ppm response is more sensitive than real part. We also visualized the contour map of the real and imaginary part of ppm value as a function of frequency and altitude so that we can estimate proper altitude for source frequency band of our survey system. The results of this paper are anticipated to give proper parameters in survey construction for seafloor massive sulfide deposit.

• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.67-78
• /
• 2007

The aim of this paper was to compare differences and similarities of farmhouses between Denmark and Korea as a cross-cultural study. Farmhouses built during the 18th and 19th centuries in Denmark, and ones from Chosun Dynasty (AD. 1392-1910) in Korea were targets of this study. Literature study and field trips to districts and open-air museums in both countries were used. Field trips were carried out during summer of 2005 in Denmark, and fall of 2005 in Korea. Detailed comparisons focused on farmhouse plans, the use of rooms and furnishing, and building materials. As a conclusion, some differences were found between the two countries. In terms of farmhouse plans, square types with four wings, and parallel types were the most frequent forms in Denmark, while a few types, such as the "I", "L", "U" shapes and square types, were more frequently found in Korea. In Denmark, the most important room was the dwelling-room, in which daily family life took place. Every member of the family slept, ate, and worked here, and kept geese and young animals during the winter season. Therefore, this room was laid out in the center of the house. However, Anbang, the most important room in Korea, was not situated in the best part of the house. Instead, the Daechung-maru occupied the center and the best place because the daechung-maru, in which the ancestral ceremony was held, was thought of as more important than a place for live people. Also the use of rooms and furnishing was quite different between the two countries, reflecting each life style. Danish furnishings represented practical daily life, while Korean furnishings reflected more conceptual aspects. It might have resulted from Confucianism in the Chosun Dynasty, which ruled daily life and even influenced use of rooms and furnishings. In other word, philosophy influenced common peoples' daily life and living environment. With reference to building materials, there was rarely a difference between the two countries. Major materials for farmhouse were quite common, such as half-timbering wood and clay, but the difference was in bricks and roof coverings. Bricks were rarely used in Korean farmhouses, while rice-straw was rare for the roof of a Danish farmhouse. Of course, the choice of materials was strongly affected by the local surroundings and overall environment. This result can give some clues for design ideas when architects and interior designers plan housing that is adapted for local peoples. This kind of cross-cultural study can also contribute to one's understanding of foreign culture, especially in housing and culture. And, it can broaden one's insight of design ideas for designers who have to compete frequently with designers in foreign countries.