• Title/Summary/Keyword: different shapes

Search Result 2,019, Processing Time 0.032 seconds

Cellular Responses and Morphological Changes of RDX-degrading Bacterium, Pseudomonas sp. HK-6 Exposed by Explosive Hexahydro-1,3,5-triaitro-1,3,5-triazine (RDX). (폭약 Hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX)에 노출된 분해세균 Pseudomonas sp. HK-6의 세포반응과 형태변화)

  • 장효원;강형일;김치경;오계헌
    • Microbiology and Biotechnology Letters
    • /
    • v.31 no.1
    • /
    • pp.75-82
    • /
    • 2003
  • The cellular responses of RDX-degrading bacterium, Pseudomonas sp. HK-6 to explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) were examined. Strain HK-6 grown at different RDX concentrations was found to demonstrate the survival rate in proportional to the rate of the stress shock proteins produced in this bacterium. Analysis of total cellular fatty acid acids showed that lipids 10:0 iso and 14:1 $\omega$5c/$\omega$5t increased approx three times in strain HK-6 grown on RDX media than TSA media. SDS-PAGE and Western blot using anti-DnaK and GroEL revealed that several stress shock proteins including 70 kDa DnaK and 60 kDa CroEL were newly synthesized in strain HK-6 exposed to different RDX concentrations in exponentially growing cultures. 2-D PAGE of soluble protein fractions from the culture of HK-6 exposed to RDX demonstrated that approximately 300 spots were observed on the silver stained gel ranging from pH 3 to pH 10. As a result, 10 spots were significantly induced and expressed in response to RDX. Scanning electron microscopy fur the cells treated with 0.135 mM RDX for 12 hrs showed the presence of perforations and irregular rod shapes with wrinkled surfaces.

Changes in the $Ca^{2+}\;and\;Mg^{2+}$ - dependent Adenosine Triphosphatase Activity and Ultrastructure of Marine Fishes by Partial Freezing III. Changes in the Ultrastructure of Muscle Tissues of Yellowtail during Low-temperature Preservation (a해산어의 부분동결에 의한 $Ca^{2+}\;및\;Mg^{2+}$ -dependent Adenosin Triphosphatase 활성 및 근섬유의 미세구조 변화 III. 저온저장 과정중 방어 근육조직의 미세구조의 변화)

  • 최경호;박찬성
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.20 no.6
    • /
    • pp.629-636
    • /
    • 1991
  • Yellowtail fishes(Seriola quinqueeradiata) were submitted to the storages using ice-cooling($0^{\circ}C$), partial freezing($-3^{\circ}C$) and freezing $-20^{\circ}C$) method. Changes in the structures of muscle during storage at different temperatures were investigated. The ice-cooling and partial freezing storage caused early decomposition of glycogen granules and mitochondrial inner membrane, but it was accorded to much slower manner comparing with that of ice-cooling storage. The scars of ice crystals were appeared after three days of storage. The number and size of the crystal increased as progressing of the storage. They were circular and mostly located between fibers. When using the freezing storage, glycogen granules were mostly found from the muscle cell even after fourteen days of storage. Mitochonidral inner membrane maintained their integrity. The scars of ice crystals were also found, however, different from those of partial freezing storage. Their existing sites were random and their shapes were irregular. In many cases, they located in the fiber and had keen edges. Fibers were broken mostly at the Z-lines on fourteen days of storage. From these results, it was concluded that partial freezing storage can repress autolytic enzymic action and can reduce the physical damage from ice crystals which is caused by freezing.

  • PDF

Dynamic Analysis of 3 Different Cross-Sectional Shapes of a Fill Dam using 3D FEM Analysis (3차원 유한요소해석에 의한 필 댐의 3가지 단면 형상을 고려한 지진해석)

  • Choi, Byoungil
    • Journal of the Korean GEO-environmental Society
    • /
    • v.16 no.8
    • /
    • pp.37-43
    • /
    • 2015
  • Dam movements are identified in real-time with measuring instruments for dam maintenance. However, for dams that have aged, the measuring instruments that were installed during the dam construction are frequently malfunctioning or completely failing altogether. Precision safety diagnosis is being executed for dams that are national facilities Type 1. During the diagnosis, a safety assessment is conducted for the dam body. Normally, during the analysis of dam safety, the widest cross-section is selected and a two-dimensional numerical analysis is taken place for the cross-section. However, numerous researchers have recently looked into applying the 3-dimensional numerical analysis program developments to precisely analyze the structure of the dam, as well as the surrounding strata, and the lower dam strata. In this study, PLAXIS 3D, a geotechnical generic FEM analysis program, was used to conduct dam safety assessments for earthquakes. The following were compared and analyzed: considering the seismic properties of the dam body with all zoned structures reflected as one rock-fill zone together with the dam body, considering the dam body as the rock-fill zone and the core zone, and the numerical analysis results. Thus, the study was aimed to analyze the impact properties of seismic waves according to the different zones.

Horizontal Stress Based on the Calculation of Lateral Stress Ratio in Unsymmetrical Space (비대칭 공간의 수평응력비 산정에 따른 수평응력에 관한 연구)

  • Moon Chang-Yeul;Lee Soo-Ki;Kwon Seung-Joon
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.9
    • /
    • pp.177-189
    • /
    • 2004
  • The backfilled space carl have various shapes such as vertical or lateral symmetric, unsymmetric slope depending on field conditions. Kellogg (1993) suggested the different equations for the backfill earth pressure and the lateral stress ratio considering that the stresses are different between the symmetrically sloped backfilled space and the vertical one. Kellogg (1993) assumed the stress generated on sloped wall surface as the simple internal friction angle of backfilled soil. However, Moon (1997) suggested modified Kellogg equation assuming that stress behavior in the sloped wall will be varied according to the rotation angle of principal stress and the friction of sloped wall surface. This study has compared and investigated the horizontal stresss of unsymmetrical backfilled space numerically and experimentally obtained when Kellogg lateral stress ratio is appled to and when average lateral stress ratio considering unsymmetric backfill slop of left and right are applied to the modified Kellogg equation. It is shown that the horizontal stress on the sloped wall has good match numerically and experimentally in the modified Kellogg equation when Kellogg's lateral stress ratio in symmetric condition is applied to the unsymmetric condition. But the horizontal stress on the vertical wall shows disagreement numerically and experimentally. The horizontal stress results in good agreement numerically and experimentally when the average lateral stress ratio of left and right at unsymmetric slop as applied to the modified Kellogg equation. Therefore, it is estimated that the application of the average lateral stress ratio to the left and right wall should be considered when backfilled space formed unsymmetric conditions.

A Propeller Design Method with a New Blade Section : Applied to Container Ships (새로운 날개단면을 이용한 프로펠러 설계법 - 콘테이너선에 응용 -)

  • J.T. Lee;M.C. Kim;J.W. Ahn;S.H. Van;H.C. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.28 no.2
    • /
    • pp.40-51
    • /
    • 1991
  • A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.

  • PDF

Relationship Between The Sasang Constitution and Ace Polymophism (사상체질유형과 ACE(angiotensin converting enzyme) 유전자 Type(polymorphism)과의 상관관계)

  • Choi, S.H.;Yim, Y.B.;Rhee, J.W.;Kim, H.Y.;Kang, C.H.
    • Journal of Sasang Constitutional Medicine
    • /
    • v.10 no.2
    • /
    • pp.283-290
    • /
    • 1998
  • Sasang Constitutional Medicine focuses on the different constitutional manifestations of the individual's nature and emotions. The nature and emotions drive the ascending and descending of Qi in the body. And this dynamics of the Qi's ascent and descent shapes the different types of structures, functions and temperaments. Although Sasang Constitutional Medicine has many advantages, its diagnosis of the constitution still depends on the doctors' own idea and has no objective identification. So many doctors in Korea have been trying to solve this problem. Recently, there are several efforts to find out the relationship between genetic information and constitution. By the way, May, 1998 there is a astonishing report about the gene which determines the human performance, that is ACE(angiotensin converting enzyme). And it suggests that the I allele was associated with improved endurance performance. ACE has three genotype including II, ID and DD. "I" means insertion and "D" means deletion. We determined the type of the Sasang constitution with QSCCII questionaire and the one's ACE genotype with PCR of the 127 people and we discovered the relationship between the constitution and the ACE genotype. The result is as follow. Among 39 people who have the II genotype, 7(18%) belong to Taeum(Taiyin), 9(23.1%) belong to Soyang(Shaoyang) and 23(59%) belong to Soeum(Shaoyin). Among 62 people who have the ID genotype, 18(29%) belong to Taeum(Taiyin), 21(33.9%) belong to Soyang(Shaoyang) and 23(37.1%) belong to Soeum(Shaoyin). Among 26 people who have DD genotype, 11(42.3%) belong to Taeum(Taiyin), 4(15.4%) belong to Soyang(Shaoyang) and 11(42.3%) belong to Soeum(Shaoyin). This data indicates that there are implicable relationship between the Sasang constitution and ACE genotype. Especially people who have II genotype have much possibility to be a Soeum(Shaoyin) person (59%) and Soyang(Shaoyang) person have less possibility to have DD genotype (15.4%). With this conclusion, we suggest further study of relationship between the Sasang constitution and ACE genotype and we think that other polymorphism can be a candidate of the partner of Sasang constitution.

  • PDF

Development of the EMC-based Empirical Model for Estimating Pollutant Loads from Small Agricultural Watersheds (농촌 소유역에서 EMC를 이용한 오염물질 부하량 산정기법의 개발)

  • Kim, Young-Chul;Kim, Geon-Ha;Lee, Dong-Ryul
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.4
    • /
    • pp.691-703
    • /
    • 2003
  • In this paper, a new and integrated approach easily used to calculate the pollutant loads from agricultural watersheds is suggested. Basic concepts of this empirical tool are based on the hypotheses that variations in event mean concentrations(EMCs) of the pollutants from a given agricultural watershed during rainstorms are only due to the rainfall pattern. This assumption would be feasible to agricultural watersheds whose land uses does not change during the cultivation period overlapped by rainy season and also in which point-sources of the pollutants are rare. Therefore, if EMC data sets through extensive sampling from various rural areas are available, it is possible to establish relationships between EMCs, shapes and land uses of the watersheds, and rainfall events. For this purpose, fifty one sets of EMC values were obtained from nine different watersheds, and those data were used to develop predictive tools for the EMCs of 55, COD, TN and TP in rainfall runoff. The results of the statistical tests for those formulas show that they are not only fairly good in predicting actual EMC values of some parameters, but also useful in terms of calculating pollutant loads on any time-spans such as the day of rainfall event or weekly, monthly, and yearly. Their applicability was briefly demonstrated and discussed. Also, the unit loads calculated from EMCs based on different land uses and real rainfall data over one of the watershed used for this study. were provided, and they are compared with other well-known unit loads.

Analysis on Organization Performance Based on Hospital Culture (기독병원과 일반병원의 조직문화 특성에 따른 조직성과 분석)

  • Kim, Woon-Shin;Nam, Eun-Woo
    • Korea Journal of Hospital Management
    • /
    • v.4 no.2
    • /
    • pp.242-265
    • /
    • 1999
  • Our study attempt is to see organizational performance according to the differences between types of hospital cultures. To determine theoretical relationship between the organizational culture and the performance, we select two hospitals in Pusan which are different in the purposes and shapes of establishment. We surveyed their members on a questionnaire based on the type of the organizational culture of the two institutions, analyzed, and review its organizational effectiveness. For the survey with questionnaires, which had been preliminary studied to raise its validity, question forms were distributed to 528 persons in April, 1999 based on the self-responses and recollected within 48 hours. The recollection rate was high(89.96%) and the quantity of questionnaires used for our final analysis was 430(81.44%). The Cronbach Coefficient Alpha of the questionnaires was 0.742. Regarding statistical techniques for analysis of the written materials, dispersion analysis(ANOVA) was adapted to test the organizational effectiveness of the two hospitals having the different organizational cultures, and Pearson Correlation was applied to determine correlations was among all variables. T-test was performed to test organizational effectiveness based on the differences in the extent of sharing the culture, organizational committment and work satisfaction between the two health institutions. From our analysis, we obtain the following conclusions. First, concerning with organizational culture of the two hospital, one of which is a christian hospital and the other is a private foundation hospital, the former is conservative and human-oriented but the latter focuses on renovation and accomplishment. Second, the private establishment has a relatively higher organizational effectiveness that the religious hospital as a result of analyzing the extent of sharing culture, organizational committment and work satisfaction. Third, it has been found that the correlations between the extent of the sharing culture and the organizational committment, the extent and work satisfaction, and the committment and the satisfaction are respectively positive influencing organizational effectiveness, especially work satisfaction. Fourth, cultural factors by which the christian hospital is affected more positively including human relations among its members, belief, its idea of establishment, tradition, work responsibility, power, and wage. On the other hand, factors such as director's leadership, personnel management, wage, hospital regulations and department managers' management ability have been seen as negative influences in order. And fifth, for the private foundation hospital human relations among its members, wages, work responsibility, director's leadership and department managers' management ability were positive in their sequence while wages, personnel management, hospital regulations, welfare and department managers' management ability were considered as negative influences in order. As these results of this study, the higher extent of sharing organizational culture, the more increasing in both organization committment and work satisfaction, the higher the effectiveness. Although it was somewhat difficult to generalize the results whose subjects were the two hospitals only, it was obvious that organizational culture was an important influential factor of organizational effectiveness. It is questionable that the extent of sharing organizational culture, organizational committment and work satisfaction as variables affecting the effectiveness have their validity, but this study has its significance in that it provided an approaching to evaluate the organizational culture of individual hospitals making allowances for such variables related to the general activities in its hospital. We hope the results of the study could be useful for the managerial strategies of the institutions.

  • PDF

An Experimental Study on the Mechanical Properties of HPFRCCs Reinforced with the Micro and Macro Fibers (마이크로 및 매크로 섬유에 의해 보강된 고인성 시멘트 복합재료의 역학적 특성에 관한 실험적 연구)

  • Kim Moo-Han;Kim Jae-Hwan;Kim Yong-Ro;Kim Young-Duck
    • Journal of the Korea Concrete Institute
    • /
    • v.17 no.2 s.86
    • /
    • pp.263-271
    • /
    • 2005
  • HPFRCC(High Performance Fiber Reinforced Cementitious Composite) is a class of FRCCs(Fiber Reinforced Cementitious Composites) that exhibit multiple cracking. Multiple cracking leads to improvement in properties such as ductility, toughness, fracture energy, strain hardening, strain capacity, and deformation capacity under tension, compression, and bending. These improved properties of HPFRCCs have triggered unique and versatile structural applications, including damage reduction, damage tolerance, energy absorption, crack distribution, deformation compatibility, and delamination resistance. These mechanical properties of HPFRCCs become different from the kinds and shapes of used fiber, and it is known that the effective size of fiber in macro crack is different from that in micro crack. This paper reports an experimental findings on the mechanical properties of HPFRCCs reinforced with the micro fiber(PP50, PVA100 and PVA200) and macro fiber(PVA660, SF500). Uniaxial compressive tests and three point bending tests are carried out in order to compare with the mechanical properties of HPFRCCs reinforced with micro fibers or hybrid fibers such as compressive strength, ultimate bending stress, toughness, deformation capacity and crack pattern under bending, etc.,

Numerical Analysis of Flow Characteristies inside innes part of Fluid Control Valve System (유동해석을 통한 유체제어벨브 시스템의 내부 유동 특성 분석)

  • Son, Chang-Woo;Seo, Tae-Il;Kim, Kwang-Hee;Lee, Sun-Ryong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.6
    • /
    • pp.160-166
    • /
    • 2018
  • The worldwide semi-conductor market has been growing for a long time. Manufacturing lines of semi-conductors need to handle several types of toxic gases. In particular, they need to be controlled accurately in real time. This type of toxic gas control system consists of many different kinds of parts, e.g., fittings, valves, tubes, filters, and regulators. These parts obviously need to be manufactured precisely and be corrosion resistant because they have to control high pressure gases for long periods without any leakage. For this, surface machining and hardening technologies of the metal block and metal gasket need to be studied. This type of study depends on various factors, such as geometric shapes, part materials, surface hardening method, and gas pressures. This paper presents strong concerns on a series of simulation processes regarding the differences between the inlet and outlet pressures considering several different fluid velocity, tube diameters, and V-angles. Indeed, this study will very helpful to determine the important design factors as well as precisely manufacture these parts. The EP (Electrolytic Polishing) process was used to obtain cleaner surfaces, and hardness tests were carried out after the EP process.