• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.3 s.22
• /
• pp.57-68
• /
• 2006

The objective of this study is to analyze the temporal pattern characteristic of short-duration rainfall defined as a rainfall durations of 6 hours or less by the Huff's 4th quartile distribution. To analyze the temporal pattern characteristic of short-duration rainfall, the rainfall data are classified by rainfall duration and rainfall type(Changma, Typhoon, Severe rain storm, Frontal storm) and change of rainfall segment. Also, the results of this study compared with result of research work of Korea Institute of Construction Technology(1989) and Ministry of Construction & Transportation(2000). The conclusions of this study are as follows; (1) Short-duration rainfall with duration of 6 hours or less is found to be most prevalent frist-quartile storms. (2) In the case of rainfall type, Changma and Severe rain storms and Frontal storm is found second-quartile storms, and Typhoon is found third-quartile storms. (3) In the result by change of sixth segment storms, the type of temporal pattern of rainfall is found to be most prevalent two sixth parts, (4) Comparative analysis of the results shows that shapes of the dimensionless cumulative curves and values are different from those of existing researches.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.169-174
• /
• 2008

Recently, biometric systems are of interest for the reliable security system. Iris recognition technology is one of the biometric system with the highest reliability. Various iris recognition methods have been proposed for automatic personal identification and verification. These methods require accurate iris segmentation for successful processing because the iris is a small part of an acquired image. The iris boundaries have been parametrically modeled and subsequently detected by circles or parabolic arcs. Since the iris boundaries have a wide range of edge contrast and irregular border shapes, the assumption that they can be fit to circles or parabolic arcs is not always valid. In some cases, the shape of a dilated pupil is slightly different from a constricted one. This is especially true when the pupil has an irregular shape. This is why this research is important. This paper addresses how to accurately detect iris boundaries for improved iris recognition, which is robust to noises.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.33-38
• /
• 2005

In this paper, the sensing unit of a non-invasive blood glucose sensor for home users, using a magneto-resonance absorption method, have been designed and manufactured. The sensor is capable of non-invasively determining blood glucose levels through measuring the 1H spin-lattice relaxation time in human body, The comparison of initial models, with different dimensions and shapes, for the sensing unit has led us to select the materials of the final model, which has adequate size and weight for home use. Through the design optimization using the FEM model, the dimension of final model has been determined to satisfy the required strength and uniformity of the magnetic field in the detecting area.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.95-100
• /
• 2016

In this work, tin oxides were obtained by the liquid reduction precipitation method and hydrothermal process using $SnCl_2{\cdot}2H_2O$, $N_2H_4$, and NaOH. Tin oxide crystals having different sizes and morphologies could be achieved. The powders were characterized by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FE-SEM). Depending on the molar ratio of the raw materials, tin oxide crystalline with the spherical and rectangular plate-like shape could be obtained, the crystal phase was SnO and $Sn_6O_4(OH)_4$. And the obtained SnO crystals by a hydrothermal reaction showed various shapes, such as, spherical, plate-like and flower-like architectures depending on the temperature conditions.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.337-352
• /
• 2015

This study suggests designs of maternity clothes wearable after childbirth and aims at confirming that maternity wear is continuously wearable during a post-natal period. As for research methods, theoretical and empirical studies with research on a production of work were conducted, focusing on the design development of the maternity dress which may be worn even after childbirth. The results of theoretical and empirical studies possibly presented various designs which require fashionability going with the trend of time. The maternity wear also requires the adaptability for a changing body shape to enable a woman to wear it during a pregnancy period and after childbirth. Besides, the convenience of dressing and undressing with wearing comfort is considered. 6 sets of one-piece dress were made as the result of the study and three factors of fashionability, adaptability and convenience were considered. The conclusions are as follows : Firstly, it verified that the maternity wear is fashionable clothes not to cover protruded abdomen but to satisfy women's desire of self expression. Secondly, it overcame the limit of dress design through fitting it to completely different two body sizes and shapes with design factors and patterns. Lastly, it suggested a research model of maternity wear corresponding to economical, environmental and ethical principles as giving an effect of "two" dresses with one. This study presented a new direction of design study with meaningful actions of fashion designing in the aspects of economical, environmental and ethical consumption unlike artificial disposal on SPA brands.

• Composites Research
• /
• v.26 no.3
• /
• pp.189-194
• /
• 2013

This paper deals with the study of mechanical properties and impact energy absorbed by composites, made by using thermoplastic and thermoset as matrix, flax fiber and nanoclay as reinforcements. The nanoclay was sprayed on the fiber laminate directly after mixing with ethanol. This experiment designed by Taguchi method and have variable factors, i.e three types of fiber direction(F), three different nanoclay wt%(N) and three spray gun hole shapes(S). According to these conditions, composites were made and the optimum conditions were found to be F1N3S1, F1N2S1, F1N2S1 and F3N2S1 for thermoplastic, and F1N3S2, F1N3S2, F1N2S2 and F3N2S1 for thermoset which were matched with tensile strength, modulus, total impact absorbed energy and heat release rate respectively.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1367-1375
• /
• 2015

Consider the linear growth models for longitudinal data analysis. Several kind of linear growth models are selected such as time-effect and random-effect models as well as a dummy variable included model. In this work, simulation data are generated with normality assumption, and both binormal ROC curve and AUC are obtained and compared for various linear growth models. It is found that ROC curves have different shapes and AUC increase slowly, as values of the covariance increase and the time passes for random-effect models. On the other hand, AUC increases very fast as values of covariance decrease. When the covariance has positive value, we explored that the variances of random-effect models increase and the increment of AUC is smaller than that of AUC for time-effect models. And the increment of AUC for time-effect models is larger than the increment for random-effect models.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.321-337
• /
• 1998

The aims of this study were firstly to investigate soft tissue reactions around single implant-supported crowns and secondly to compare soft tissue dimensions and conditions of the crowns in relation to interdental papillae, and lastly to investigate patients'esthetic satisfaction with their single implant-supported crowns according to the interdental papillae presence/absence. Twenty-nine patients (41 implants) whose single missing tooth in the maxillary anterior region had been replaced by single implant-supported crown participated for the study and various variables of soft tissue conditions, dimensions and crown dimensions were measured around the single implant-supported crowns at clinical examination and from study models and slides. The results showed that the soft tissue conditions around the single implantsupported crowns were similar to those around implants used for partially or totolly edentulous patients. Except for the high frequency of bleeding on probing, all other parameters revealed healthy conditions. The buccal sites of the crown had a shallow pocket comparing with other sites. At all sites of the crown, similar status of little inflammation was found. Mesial sites and central-incisor positioned implantsupported crowns had lower contact point position than distal sites and lateral-incisor positioned crowns, respectively. Mucositis index, probing depth and contact point position were significantly correlated with papillae index(p < 0.05). More inflammation and lower contact point position were found at the implant-supported crown with no interdental space than that with interdental space. Patients showed high esthetic satisfaction regardless of interdental space presence. The result indicated that, despite of their submucosal crown margins, single implantsupported crowns have soft tissue conditions as good as other implants used for the treatment of the different types of edentulism and a clinician can manipulate interdental papilla height by modifying crown shapes within the limits of not violating total esthetics.

• Journal of the Korean Home Economics Association
• /
• v.24 no.1
• /
• pp.28-41
• /
• 1986

In the history of costume, coat can be traced up to ancient Persia but it was generalized as today's style around 14th an d15th century in Euro[pe. World wars, revolutions and rapid social changes of the last 80 years have produced more changes in the way people dress than any comparable period in history. Thewse changes enabled emergence of more modernized woman's garments and through it, dress and coat ensemble became public's main fashion. In 1920's after world war I, boyish style in woman's garment was in vogue. Woman's coat was also in the same style with length sortened up to the knee level and silhoutte was straighter and semi-fitted than previous period. Length of the coat was longer in late 1930's but shortened again in 1940's. And the most popular silhouette of both 30's and 40's was shape of the hourglass which was commonly called the "X-shape". Also double=breasted coat with fitted waistline, belt and flare skirt was in vogue. In 1950's and 60's, with the variety of lines in woman's garments, silhouette of the coat also appeared in many different forms. Along with the various shapes, color of the coat changed throughout the decades : dark colors in 20's, bright colors in 30's, mixed colors of 20's and 30's in 40's and in 50's, color had changed to archromatic. In fabric, wool was most popular in all periods. However, such gabrics as tweed, cotton, gaberdine, linen were added to give variety. It is very interesting to see collars trimmed with expensive furs were very popular in 20's and 30's but it almost disappeared in 40's and fur trimming reappeared in late 50's. In addtion to silhouette changes in design, details such as buttons, epaulettes, pockets and fur trimming of hemline were emphasizing points of varieties in design. This study has set time limits world war I which was the period coat became major fashion of woman's clothing, to 1960's.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.53-58
• /
• 2012

An experimental study on the hydrodynamic performance of a backward bent duct buoy (BBDB) was performed in a 2D wave tank. The BBDB is one of the promising oscillating water column (OWC) types of floating wave energy converters. Two different corner-shaped BBDBs (sharp-corner and round-corner) were used to measure the maximum chamber surface elevations and body motions for various incident wave conditions, and their hydrodynamic characteristics were compared. In order to investigate the effect of the pneumatic pressure inside the chamber, the heave and pitch angle interacted with elevations were compared for both open chamber and partially open chamber BBDBs. From the comparison study, the deviation in the chamber surface elevations between the two shapes of BBDBs was found to be significant near the resonance period, which may be explained by viscous energy loss. It was also found that the pneumatic pressure noticeably affected the chamber surface elevation and body motions.