• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.515-518
• /
• 2007

Gas hydrates are ice-like crystalline compounds that form under low temperature and elevated pressure conditions. Recently, gas hydrates present a novel means for natural gas storage and transportation with potential applications in a wide variety of areas. An important property of hydrates that makes them attractive for use in gas storage and transportation is their very high gas-to-sol id ratio. In addition to the high gas content, gas hydrates are remarkably stable. The main barrier to development of gas hydrate technology is the lack of an effective mass production method of gas hydrate in solid form. In this study, some performance comparison among several cases classified by different volume sizes of solution were carried to identify the characteristics due to the volume increment. And it is found that one of the main reasons disturbing hydrate formation is related to the lack of cooling heat transfer due to the volume increase of the solution. So, three kinds of heat transfer plates which have different shapes and cross sectional areas were made and tested for the performance comparison following to the shape and area of each plate. Finally it is clarified that the heat transfer is one of the major factors effecting hydrate formation performance and the installation of heat transfer plate can enhance the formation performance especially not in terms of the quantity but the speed.

• Journal of Powder Materials
• /
• v.19 no.2
• /
• pp.110-116
• /
• 2012

This study investigated the effects of annealing environment for the densification and purification properties of pure titanium coating layer manufactured by cold spraying. The annealing was conducted at $600^{\circ}C$/1 h and three kinds of environments of vacuum, Ar gas, and $5%H_2+Ar$ mixture gas were controlled. Cold sprayed Ti coating layer (as sprayed) represented 6.7% of porosity and 228 HV of hardness, showing elongated particle shapes (severe plastic deformation) perpendicular to injection direction. Regardless of gas environments, all thermally heat treated coating layers consisted of pure ${\alpha}$-Ti and minimal oxide. Vacuum environment during heat treatment represented superior densification properties (3.8% porosity, 156.7 HV) to those of Ar gas (5.3%, 144.5 HV) and $5%H_2+Ar$ mixture gas (5.5%, 153.1 HV). From the results of phase analysis (XRD, EPMA, SEM, EDS), it was found that the vacuum environment during heat treatment could be effective for reducing oxide contents (purification) in the Ti coating layer. The characteristic of microstructural evolution with heat treatment was found to be different at three different gas environments. The controlling method for improving densification and purification in the cold sprayed Ti coating material was also discussed.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.436-442
• /
• 2008

Magnetic resonance electrical impedance tomography(MREIT) has been suggested to produce cross-sectional conductivity images of an electrically conducting object such as the human body. In most previous studies, recessed electrodes have been used to inject imaging currents into the object. An MRI scanner was used to capture induced magnetic flux density data inside the object and a conductivity image reconstruction algorithm was applied to the data. This paper reports the performance of a thin and flexible carbon-hydrogel electrode that replaces the bulky and rigid recessed electrode in previous studies. The new carbon-hydrogel electrode produces a negligible amount of artifacts in MR and conductivity images and significantly simplifies the experimental procedure. We can fabricate the electrode in different shapes and sizes. Adding a layer of conductive adhesive, we can easily attach the electrode on an irregular surface with an excellent contact. Using a pair of carbon-hydrogel electrodes with a large contact area, we may inject an imaging current with increased amplitude primarily due to a reduced average current density underneath the electrodes. Before we apply the new electrode to a human subject, we evaluated its performance by conducting MREIT imaging experiments of five swine legs. Reconstructed conductivity images of the swine legs show a good contrast among different muscles and bones. We suggest a future study of human experiments using the carbon-hydrogel electrode following the guideline proposed in this paper.

• Structural Engineering and Mechanics
• /
• v.54 no.1
• /
• pp.169-188
• /
• 2015

This study presents the effects of the spatial variation of ground motions in a hard rock site on the seismic responses of a base-isolated nuclear power plant (BI-NPP). Three structural models were studied for the BI-NPP supported by different number of lead rubber bearing (LRB) base isolators with different base mat dimensions. The seismic responses of the BI-NPP were analyzed and investigated under the uniform and spatial varying excitation of El Centro ground motion. In addition, the rotational degrees of freedom (DOFs) of the base mat nodes were taken to consider the flexural behavior of the base mat on the seismic responses under both uniform and spatial varying excitation. Finally, the seismic response results for all the analysis cases of the BI-NPP were investigated in terms of the vibration periods and mode shapes, lateral displacements, and base shear forces. The analysis results indicate that: (1) considering the flexural behavior of the base mat has a negligible effect on the lateral displacements of base isolators regardless of the number of the isolators or the type of excitation used; (2) considering the spatial variation of ground motions has a substantial influence on the lateral displacements of base isolators and the NPP stick model; (3) the ground motion spatial variation effect is more prominent on lateral displacements than base shear forces, particularly with increasing numbers of base isolators and neglecting flexural behavior of the base mat.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1563-1572
• /
• 2018

Gold nanoparticles (AuNP) and their conjugates have been gaining a great deal of recognition in the medical field. Meanwhile, extended-spectrum ${\beta}$-lactamases (ESBL)-producing bacteria are also demonstrating a challenging problem for health care. The aim of this study was the biosynthesis of AuNP using Rosa damascenes petal extract and conjugation of ceftriaxone antibiotic (Cef-AuNP) in inhibiting ESBL-producing bacteria and study of in vitro anticancer activity. Characterization of the synthesized AuNP and Cef-AuNP was studied. ESBL-producing strains, Acinetobacter baumannii ACI1 and Pseudomonas aeruginosa PSE4 were used for testing the efficacy of Cef-AuNP. The cells of MCF-7 breast cancer were treated with previous AuNP and Cef-AuNP at different time intervals. Cytotoxicity effects of apoptosis and its molecular mechanism were evaluated. Ultraviolet-visible spectroscopy and Fourier transform infrared spectroscopy established the formation of AuNP and Cef-AuNP. Transmission electron microscope demonstrated that the formed nanoparticles were of different shapes with sizes of 15~35 nm and conjugation was established by a slight increase in size. Minimum inhibitory concentration (MIC) values of Cef-AuNP against tested strains were obtained as 3.6 and $4{\mu}g/ml$, respectively. Cef-AuNP demonstrated a decrease in the MIC of ceftriaxone down to more than 27 folds on the studied strains. The biosynthesized AuNP displayed apoptotic and time-dependent cytotoxic effects in the cells of MCF-7 at a concentration of $0.1{\mu}g/ml$ medium. The Cef-AuNP have low significant effects on MCF-7 cells. These results enhance the conjugating utility in old unresponsive ceftriaxone with AuNP to restore its efficiency against otherwise resistant bacterial pathogens. Additionally, AuNP may be used as an alternative chemotherapeutic treatment of MCF-7 cancer cells.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.67-77
• /
• 2017

In this paper, it is aimed to present a comparative study about the structural behavior of tall buildings consisting of different type of materials such as concrete, steel or timber using finite element analyses and experimental measurements on shaking table. For this purpose, two 1/60 scaled 28 and 30-stories wooden building models with $40{\times}40cm$ and $35{\times}35cm$ ground/floor area and 1.45 m-1.55 m total height are built in laboratory condition. Considering the frequency range, mode shapes, maximum displacements and relative story drifts for structural models as well as acceleration, displacement and weight limits for shaking table, to obtain the typical building response as soon as possible, balsa is selected as a material property, and additional masses are bonded to some floors. Finite element models of the building models are constituted in SAP2000 program. According to the main purposes of earthquake resistant design, three different earthquake records are used to simulate the weak, medium and strong ground motions. The displacement and acceleration time-histories are obtained for all earthquake records at the top of building models. To validate the numerical results, shaking table tests are performed. The selected earthquake records are applied to first mode (lateral) direction, and the responses are recorded by sensitive accelerometers. Comparisons between the numerical and experimental results show that shaking table tests are enough to identify the structural response of wooden buildings. Considering 20%, 10% and 5% damping rations, differences are obtained within the range 4.03-26.16%, 3.91-65.51% and 6.31-66.49% for acceleration, velocity and displacements in Model-1, respectively. Also, these differences are obtained as 0.49-31.15%, 6.03-6.66% and 16.97-66.41% for Model-2, respectively. It is thought that these differences are caused by anisotropic structural characteristic of the material due to changes in directions parallel and perpendicular to fibers, and should be minimized using the model updating procedure.

• Korean Journal of Plant Resources
• /
• v.20 no.2
• /
• pp.193-200
• /
• 2007

Pollen grains of seven taxa on the family Pyrolaceae, known to be distributed in Korea (Pyrola dahurica(Andreses) Kom., P. incarnata (DC.) Fisch. ex Kom., P. japonica Klenze ex Alefeld, P. minor L., P. renifolia Max., Orthilia secunda (L.) House, Chimaphila japonica Miq.), were examined by the light and the scanning electron microscope in order to evaluate their taxonomic significances. The pollen units of genus Pyrola, Orthilia, Chimaphila were tetrad, monad, polyad respectively. This characteristics was good character for delimiting the genus, and Orthilia secunda (L.) House was more proper scientific name than Pyrola secunda L. based upon this character. Pollen size, tricolporate length, surface sculpturing pattern were different slightly among the treated taxa, and surface sculpturing patterns of Pyrola dahurica, P. incarnate, P. renifolia, Chimaphiza japonica were different from previous reports. Evolutionary trends of pollen grains in Pyrolaceae were inferred from the pollen units and aperture shapes.

• The Research Journal of the Costume Culture
• /
• v.25 no.1
• /
• pp.64-74
• /
• 2017

The purpose of this study is to identify the sensibility images when the direction and width of stripes change on semi-tight skirts. The researcher made 12 stimuli consisting of images of skirts with a combination of six stripe directions and two stripe widths. The images were assessed by 126 subjects who were students majoring in apparel. Three sensibility image factors were found: personality, attractiveness, and activity. Images of skirts with different stripe directions were perceived as having significant differences among these factors. Stripe widths of 1.5cm and 3cm in upward diagonal, vertical side line, and downward diagonal directions influenced the personality factor. Diagonal stripes with a width of 1.5cm positively influenced attractiveness and activity. Stripes in a vertical direction increased attractiveness when the stripe width was 1.5cm rather than 3cm. Although the interaction of stripe direction and width significantly influenced perceptions of attractiveness and activity in images of semi-tight skirts, they did not significantly influence personality. In accordance with the analysis, stripe direction was significantly different for all factors. This analysis indicated that each factor has its own independent influence. Stripe width had major independent effects, showing significance in attractiveness and activity. However, personality did not indicate any significant difference. The results of this study will help women select suitable clothing according to their individual preferences and body shapes by influencing how images are depicted because women will be able to use the images to estimate their body images when the skirts are put on.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.193-204
• /
• 1999

Particle crushing is an important and essential factor in interpreting the strength and deformation properties of granular materials in the case of geotechnical problems related to soil crushability. As a recent field problem, the exploitation of offshore oil reserves in tropical and sub-tropical coastal shelf areas has shown that the behaviour of soils containing carbonates is markedly different from predominantly silica sands. In this study, as a first step in making a mechanical framework of granular materials incorporating the soil crushability, single particle fragmentation tests were carried out on four different types of sands in order to clarify the characteristics of the single particle fragmentation strength as related to soil crushability. The single particle strength was considered with the influence of the particle shapes, the amount of mineral components and the particle sizes. The soil particle strength corresponding $D_{50}$ of soil distribution curve has shown the lower value, the more the carbonate component and the more angular the particle shape.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.228-236
• /
• 2016

The aim of this study was to characterize the hemolytic Aeromonas sp. MH-8 exposed to green tea catechin, epigallocatechin gallate (EGCG). Initially, the hemolytic Aeromonas sp. MH-8 was enriched and isolated from stale fish. Bactericidal effects of MH-8 exposed to EGCG ranging from 1 mg/mL to 4 mg/mL were monitored, and complete bactericidal effects were achieved within 3 h at 3 mg/mL and higher concentrations. SDS-PAGE with silver staining revealed that the amount of lipopolysaccharides increased or decreased in the strain MH-8 treated to different concentrations and exposing periods of EGCG in exponentially growing cultures. The stress shock proteins (70-kDa DnaK and 60-kDa GroEL), which might contribute to enhancing the cellular resistance to the cytotoxic effect of EGCG, were induced at different concentrations of EGCG exposed to cell culture of MH-8. Scanning electron microscopic analysis demonstrated the presence of irregular rod shapes with umbilicated surfaces for cells treated with EGCG. 2-DE of soluble protein fractions from MH-8 cultures showed 18 protein spots changed by EGCG exposure. These proteins involved in chaperons (e.g., DnaK, GroEL and trigger factor), enterotoxins (e.g., aerolysin and phospholipase C precursor), LPS synthesis (e.g., LPS biosynthesis protein and outer membrane protein A precursor), and various biosynthesis and energy metabolism were identified by peptide mass fingerprinting using MALDI-TOF. In consequence, EGCG was found to have substantial antibacterial effects against food-poisoning causing bacterium, hemolytic Aeromonas sp. MH-8. Also the results provide clues for understanding the mechanism of EGCG-induced stress and cytotoxicity on Aeromonas sp. MH-8.