• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2791-2796
• /
• 2007

In their long journey through the cardiovascular circuit, erythrocytes are coerced to shape transform and assume different shapes on account of varying flow conditions in different blood vessels. The present work was aimed to visualize these erythrocyte shape transformations by an invitro microcirculatory model, and assess multi-shape erythrocyte deformability. The model uses an in-house fabricated, inexpensive disposable micro flow channel to mimic certain invivo conditions and a fast frame video microscopic system for imaging the shape changes in erythrocytes. Results show the multi-shape transformation of erythrocyte christened as discoidal shape, the asymmetrically deformed 'hat' and 'bullet-like' shapes, and the axially deformed 'slipper' and 'spindle-like' shapes. Specific erythrocyte showed the shape transition and transformation while passing through the observed window. The obtained erythrocyte shapes very analyzed for deformability index using image processing techniques that varied significantly (p <0.001) for different shapes as compared with the resting shape.

• Wind and Structures
• /
• v.24 no.1
• /
• pp.25-41
• /
• 2017

The effects of finite cylinder free end shape on the mean and fluctuating wind pressures were investigated experimentally and numerically by using three different roof shapes: flat, conical and hemispherical. The pressure distributions on the roofs and the side walls of the finite cylinders partially immersed in a simulated atmospheric boundary layer have been obtained for three different roof shapes. Realizable $k-{\varepsilon}$ turbulence model was used for numerical simulations. Change in roof shapes has caused significant differences on the pressure distributions. When compared the pressure distributions on the different roofs, it is seen from the results that hemispherical roof has the most critical pressure field among the others. It is found a good agreement between numerical and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.159-166
• /
• 2004

Custom-tailored products are meant by the products having various sizes and shapes to meet the customer's different tastes or needs. Thus fabrication of custom-tailored products inherently involves inefficiency. To minimize this inefficiency, a new paradigm is proposed in this work. In this paradigm, different parts are grouped together according to their sizes and shapes. Then, representative shape of each group is derived and it will be used as the work-piece from which the parts in the group are machined. Once a new product is ordered, the optimal work-piece is selected through making similarity comparisons of new product and each representative shape. Then an effective NC tool-path is generated to machine only the different portions between the work-piece and the ordered product. The efficient machining conditions are also derived from this shape difference. By machining only the different portions between the work-piece and the ordered product, it saves time. Similarity comparison starts with the determination of the closest pose between two shapes in consideration. The closest pose is derived by comparing the ray distances while one shape is virtually rotated with respect to the other. Shape similarity value and overall similarity value calculated from ray distances are used for grouping. A prototype system based on the proposed methodology has been implemented and applied to the grouping and machining of the shoe lasts of various shapes and sizes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.70-73
• /
• 2003

Custom-tailored products are meant by the products having various sizes and shapes to meet the customer's different tastes or needs. Thus fabrication of custom-tailored products inherently involves inefficiency. To minimize this inefficiency, a new paradigm is proposed in this work. In this paradigm. different paris are grouped together according to their sizes and shapes. Then, representative shape of each group is derived and it will be used as the work-piece from which the parts in the group are machined. Once a new product is ordered, the optimal work-piece is selected through making similarity comparisons of new product and each representative shape. Then an effective NC tool-path is generated to machine only the different portions between the work-piece and the ordered product. The efficient machining conditions are also derived from this shape difference. By machining only the different portions between the work-piece and the ordered product, it saves time. Similarity comparison starts with the determination of the closest pose between two shapes in consideration. The closest pose is derived by comparing the ray distances while one shape is virtually rotated with respect to the other. Shape similarity value and overall similarity value calculated from ray distances are used for grouping. A prototype system based on the proposed methodology has been implemented and applied to the grouping and machining of the shoe lasts of various shapes and sizes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2006

We studied the 3D simulating shapes of the flared skirt using NARCIS-Drape Simulation software made in Korea D&M FT. The experimental conditions were made of three types of cuttings (lengthwise, crosswise, 45 bias) and polyester fabrics for flared skirt (light, medium, heavy) and different simulating repetitions (1, 2, ${\cdots}$, 9, 10 times). We accomplished some experimental data on the 3D simulating shapes of the flared skirt made by different conditions. The 3D simulation shapes of the flared skirts were gradually getting stabilized from 5 repetitions. And the length of skirts and the width and depth of hems diminished lower by degrees as the simulating repetitions. It is considered that the simulating repetition for the flared skirt was appropriate in the range of 8 to 10 times. But it was not reasonably showed that the difference in the drape of the flared skirt was made by different cuttings and fabrics.

• Ocean Systems Engineering
• /
• v.2 no.1
• /
• pp.69-81
• /
• 2012

Presented herein is a study on reducing the hydroelastic response of very large floating structures (VLFS) by altering their plan shapes. Two different categories of VLFS geometries are considered. The first category comprises longish VLFSs with different fore/aft end shapes but keeping their aspect ratios constant. The second category comprises various polygonal VLFS plan shapes that are confined within a square boundary or a circle. For the hydroelastic analysis, the water is modeled as an ideal fluid and its motion is assumed to be irrotational so that a velocity potential exists. The VLFS is modeled as a plate by adopting the Mindlin plate theory. The VLFS is assumed to be placed in a channel or river so that only the head sea condition is considered. The results show that the hydroleastic response of the VLFS could be significantly reduced by altering its plan shape.

• Wind and Structures
• /
• v.34 no.5
• /
• pp.407-419
• /
• 2022

Many factors should be considered by architects and designers for designing a tall building. Wind load is one of these important factors that govern the design of tall building structures and can become a serious challenge when buildings tend to be built very tall and slender. On the other hand, through the initial stages of a design process, choosing the design geometry greatly affects the wind-induced forces on a tall building. With this respect, geometric shapes with 3-fold rotational symmetry are one of the applied plan shapes in tall buildings. This study, therefore, aims to investigate the aerodynamic characteristics of 8 different geometrical shapes using Computational Fluid Dynamics (CFD) by measuring the drag and lift forces. A case study approach was conducted in which different building shape models have the same total gross area and the same height of 300 meters. The simulation was an incompressible transient flow that ran 1700 timesteps (85 seconds on the real-time scale). The results show a great difference between wind-induced force performance of buildings with different plan shapes. Generally, it is stated that the shapes with the same area, but with smaller perimeters, are better choices for reducing the drag force on buildings. Applying the lift force, the results show that the buildings with plan shapes that have rounded corners act better in crosswind flow while, those with sharp corners induce larger forces in the same direction. This study delivers more analytical understanding of building shapes and their behavior against the wind force through the parametric modelling.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.630-633
• /
• 2010

In this letter, we propose a novel polygonal approximation of digital curves that preserve original shapes. The proposed method first detects break points, which have two different consecutive vectors, and sets an initial dominant point set. The approximation is then performed iteratively by deleting a dominant point using a novel distance, which can measure both the distance and the angle acuteness. The experimental results show that the proposed method can preserve original shapes and is appropriate for various shapes, including slab-sided shapes.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2173-2182
• /
• 2020

Control valves are widely used to regulate fluid flux in nuclear power plants, and there are more than 1500 control valves in the primary circuit of one nuclear power plant. With their help, the flux can be regulated to a specific level of water or steam to guarantee the energy efficiency and safety of the nuclear power plant. The flux characteristics of the control valve mainly depend on the valve core shape. In order to analyze the effects of valve core shapes on flux characteristics of control valves, this paper focuses on the valve core shapes. To begin with, numerical models of different valve core shapes are established, and results are compared with the ideal flux characteristics curve for the purpose of validation. Meanwhile, the flow fields corresponding to different valve core shapes are investigated. Moreover, relationships between the valve core opening and the outlet flux under different valve core shapes are carried out. The flux characteristics curve and equation are proposed to predict the outlet flux under different valve core openings. This work can benefit the further research of the flux control and the optimization of the valve core for control valves in nuclear power plants.

• Journal of Ginseng Research
• /
• v.6 no.1
• /
• pp.67-74
• /
• 1982

To clarify the morphological characteristics of Korean ginseng cultivated, the shapes and frequencies of Inflorescence, flowering bud, fruit, and leaf were investigated. The shapes of inflorescence, flowering bud and fruit, and leaf were divided into 6, 3, and 7 groups, respectively. The frequencies of these shapes were not significantly different according to the planting positions.