• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.713-718
• /
• 2016

Predicting precise specifications of differential mixed-signal circuits is a difficult problem, because analytically derived correlation between process variations and conventional specifications exhibits the limited prediction accuracy due to the phase unbalance, for most self-tests. This paper proposes an efficient prediction technique to provide accurate specifications of differential mixed-signal circuits in a system-on-chip (SoC) based on a nonlinear statistical nonlinear regression technique. A spectrally pure sinusoidal signal is applied to a differential DUT, and its output is fed into another differential DUT through a weighting circuitry in the loopback configuration. The weighting circuitry, which is employed from the previous work [3], efficiently produces different weights on the harmonics of the loopback responses, i.e., the signatures. The correlation models, which map the signatures to the conventional specifications, are built based on the statistical nonlinear regression technique, in order to predict accurate nonlinearities of individual DUTs. In production testing, once the efficient signatures are measured, and plugged into the obtained correlation models, the harmonic coefficients of DUTs are readily identified. This work provides a practical test solution to overcome the serious test issue of differential mixed-signal circuits; the low accuracy of analytically derived model is much lower by the errors from the unbalance. Hardware measurement results showed less than 1.0 dB of the prediction error, validating that this approach can be used as production test.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.142-150
• /
• 2009

This paper presents bio-ethanol production from fruit wastes as it possibly alternate fossil fuel in the future. To illustrate the component ratio in exocarps of fruit wastes such as pears, apples, and persimmons, the amount of moisture, lignin, $\alpha$, $\beta$, $\gamma$-cellulose, and ash content were respectively examined by the ingredient analysis. Also, the amount of the glucose obtained from the enzyme hydrolysis using the axocarps was investigated. It was found in our results that the energy efficient process requires different temperature conditions for the saccharification step($50^{\circ}C$ and the fermentation step($30^{\circ}C$ in ethanol synthesis.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권2호
• /
• pp.239-248
• /
• 1994

To study the relationship between certain hormones and metabolites and between hormones and milk yield during different stage of lactation, six lactating Karan Swiss cows and six Murrah buffaloes were maintained. Growth hormone, insulin, $T_3$, $T_4$, glucose, BHBA, NEFA and milk yield were studied. Highly negative relationship of growth hormone with insulin and triiodothyronine in cows and marginally negative in buffaloes suggest that insulin and triiodothyronine aid in the process of partitioning of nutrients towards milk production through reducing the demands of nutrients by peripheral tissue. The significant and negative correlation of growth hormone with dry matter intake in both the species suggest that the availability of nutrients from the digestive tract play a role in the regulation of growth hormone secretion. Positive relationship of growth hormone with non esterified fatty acids in both the species suggest that high growth hormone levels may result in fat mobilization and thereby increase the availability of energy precursors for milk synthesis. Insulin was negatively correlated with milk yield and lactose content and positively with milk fat and protein but the degree of relationship varied. In both the species the relationship between triiodothyronine and milk yield was negative and between thyroxine and milk yield was positive. However, it was significant only in cows and not in buffaloes. Thyroxine was positively correlated with beta-hydroxybutyrate and non-esterified fatty acids with milk yield in both the species.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.119-125
• /
• 2016

The objective of this study was to investigate the effect of the fat reduction on the physicochemical and microbiological characteristics of fermented sausages during ripening and drying. Low fat fermented sausages were produced with different fat levels (30%, 20%, 10%, and 5%) under ripening conditions and fermented process. Samples from each treatment were taken for physicochemical and microbiological analyses on the 0, 1, 2, 3, 4, 5, 7, 10, 14, and 21st day of ripening. In proximate analysis, the fat reduction in sausages produced an increase in moisture, protein and ash contents during ripening and drying (p<0.05). The weight losses were significantly higher in high fat formulations during the first 4 days, whereas those were higher in low fat ones after 10 days of storage (p<0.05). Fat reduction was responsible for an increase in shear force values after 3 days of storage. The volatile basic nitrogen (VBN) value of the low fat samples was significantly higher (p<0.05). Low fat sausages reduced the extent of lipid oxidation. The lower fat level produced redder sausages. Total plate bacteria and Pseudomonas counts of sausages showed no significant differences. Production of low fat sausages resulted in the physicochemical and microbiological attributes equal to or better than the high fat sausages without negative effects, except only a higher VBN and weight loss.

• 한국가구학회지
• /
• 제17권3호
• /
• pp.69-78
• /
• 2006

Recently, the aspect of consumers' preference for design has been changed to a pattern of respect for personality, based on 'personal value of passion'. The differentiated personal passion of modern people does not allow them to select mass-produced industrial product, and leads them to choose life style different from others. Specially, consumers want to express. their differentiated personality by preferring and possessing the originally designed products. Therefore, the originally designed products that are clearly identifiable become the object of consumers' consideration, and stimulate the consumers' desire to purchase. According to new needs of consumers, it is required to reconsider the old design pattern of furniture based on simplicity and propose new design for furniture to meet the needs of consumers. Mass production has resulted in a strong focus on simplicity rather than difficulty and complexity of the production process. This tendency shows the design pattern that leans toward one side excluding the expression of correlative concept among design elements. This one sided design leads modern people to have no personality, and shows only simple and uniform expression of passion. Therefore, this paper is purposed to develop furniture with more personality by applying correlative concept that has been taken less seriously in the field of design to furniture design.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.335-342
• /
• 2020

ESS(초기고장배제)는 제품생산 간 유입되는 '잠재결함'을 제거하기 위한 중요한 생산 프로세스로서 최근에는 방위사업 분야에서도 제품에 대한 필수 품질요구조건으로서 QAR(품질보증요구서)에 포함되고 있으나, 무기체계의 분류 및 작성자에 따라 내용 및 작성양식이 상이하거나, 중요한 요소가 누락되는 사례가 빈번하게 식별되고 있다. 따라서 본 논문에서는 MIL-HDBK-344A 기반의 정량적인 ESS 요구사항 표준안을 제시하여 QAR의 일관성 및 완전성을 보장하고, 잠재결함 제거 효과 파악을 위한 지표인 결함유도효율(PE) 산출 시 용이성을 확보하고자 한다.

• 한국의상디자인학회지
• /
• 제16권2호
• /
• pp.177-188
• /
• 2014

A fur has emerged as one of fashion staples. there has been a rising interest in fur industry. Therefore, this study investigated how to estimate the amount of raw materials consumed at the production of fur clothes, and the scope of the study was limited to mink clothes. For an empirical study, in addition, Koreans' favorable mink design was chosen based on previous studies and sales of fur clothes, and its consumption was estimated. The consumption of mink clothes depends on the special feature of natural resources such as place of origin, gender and variety. Therefore the method of consumption for mink clothes is inevitably different from it of fiber clothes. Considering the procedure of mink clothe's production as collect same kind of a fur and process though pattern placement, first is outfut work for consumption. At estimation of the consumption of mink clothes, the number of minks was counted by matching the area of mink skin with that of the mink cloth patterns. Then, the usable area of the patterns was calculated after splitting them into diverse figures such as triangle, quadrangle and trapezoid. If we divide area by using the similar in shape of pattern and calculate, We can find high efficiency by reducing extra space. Specially we can expect more efficient work system when we use computers for efficient division of area.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.905-913
• /
• 2017

Advanced reactor designs often feature longer operating cycles between refueling and new concepts of operation beyond traditional baseload electricity production. Owing to this increased complexity, traditional proportional-integral control may not be sufficient across all potential operating regimes. The prototypical advanced reactor (PAR) design features two independent reactor modules, each connected to a single dedicated steam generator that feeds a common balance of plant for electricity generation and process heat applications. In the current research, the PAR is expected to operate in a load-following manner to produce electricity to meet grid demand over a 24-hour period. Over the operational lifetime of the PAR system, primary and intermediate sodium pumps are expected to degrade in performance. The independent operation of the two reactor modules in the PAR may allow the system to continue operating under degraded pump performance by shifting the power production between reactor modules in order to meet overall load demands. This paper proposes a Takagi-Sugeno (T-S) fuzzy logic-based power distribution system. Two T-S fuzzy power distribution controllers have been designed and tested. Simulation shows that the devised T-S fuzzy controllers provide improved performance over traditional controls during daily load-following operation under different levels of pump degradation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.367-368
• /
• 2023

Kiscon, Seumteo, KONEPS and CSI are representative construction-related DBs. All four DBs are operated by the public. However, the characteristics of data are different depending on the purpose. Therefore, it is difficult to utilize integrated data and it is only used sparingly. Creating and sharing a unique key that can identify a construction site will enable integrated accumulation and management of construction-related data for various purposes. At this point, it is most efficient to assign a unique key based on KISCON. KISCOn data conforms to the construction site definition and covers most of the public, private, architectural and civil works. In addition, there is an advantage in that DB construction is performed in the construction situation, which is a relatively preceding process. In the future, it is necessary to create a practical construction site integrated DB through the production of an integrated key table containing linkage information of unique keys for site management, performance indicators, and statistics production.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권12호
• /
• pp.635-640
• /
• 2016

생산 시스템의 신뢰도와 공정에서의 품질관리는 수익과 직결되는 중요한 요소이다. 이런 이유로 M2M 디바이스 레벨에서 데이터를 획득하는 방법 그리고 그것을 응용하여 신뢰도 및 품질 등과 연결하는 연구에서 최근 많은 성과를 보이고 있다. 본 논문은 이러한 연구 결과의 연장으로 획득한 데이터의 처리방법과 결과에 관한 것이다. 일반적으로, 센서 데이터와 같은 미세한 차이를 가지는 신호를 이용하여 제품의 품질을 식별하는 것은 기존의 통계적인 방법에서는 어렵다. 그러나 최근 기계 공정에서 정보를 실시간적이고 즉시적으로 처리를 해야 하는 요구가 증대되고 있다. 특히 사출성형 공정의 경우 프로세스가 짧은 Cycle 갖고 있어 프로세스의 진행과 동시에 제품의 양-불량을 판별할 수 있는 방법이 필요하다. 본 논문은 Kalman Filter를 적용하여 사출공정의 센서 데이터를 실시간적으로 처리하여 제품의 상태를 판단할 수 있는 방안을 제시한다.