• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.25-29
• /
• 2020

The purpose of this study was to investigate the characteristics of lignin fractionated from waste wood (WW) using a two-step process of ethanol organosolv pretreatment followed by ultrafiltration with membranes of different molecular weight cut-offs (1, 5 and 20 kDa). The different permeates obtained were characterized by fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The analysis by FT-IR and NMR of these lignins showed that the lignin core was successfully separated from WW. TGA curves confirmed that the thermal properties of lignin fractionated by ultrafiltration were almost identical to each other. The results from GPC confirmed that fractionating of lignin was achieved by ultrafiltration. For the membrane fractionation process, values of molecular weight decreased as the cut-offs used to obtain the fractions became smaller. As a result, fractionating lignin by a two-step process allowed separating different fractions of lignin of different molecular weights yielded high purity without interference from existing pollutants in WW. The two-step process offers the possibility of using fractionated WW as an untapped source of lignin.

• Carbon letters
• /
• 제12권2호
• /
• pp.70-80
• /
• 2011

Two pitches with different average molecular structures were electrospun and compared in terms of the properties of their fibers after oxidative stabilization, carbonization, and activation. The precursor with a higher molecular weight and greater content of aliphatic groups (Pitch A) resulted in better solubility and spinnability compared to that with a lower molecular weight and lower aliphatic group content (Pitch B). The electrical conductivity of the carbon fiber web from Pitch A of 67 S/cm was higher than that from Pitch B of 52 S/cm. The carbon fiber web based on Pitch A was activated more readily with lower activation energy, resulting in a higher specific surface area compared to the carbon fiber based on Pitch B (Pitch A, 2053 $m^2/g$; Pitch B, 1374 $m^2/g$).

• 약학회지
• /
• 제35권6호
• /
• pp.461-465
• /
• 1991

Silica-based gel filtration chromatography has been used to characterize molecular weight of proteins. However, the molecular weight measured by this method was distorted by protein-silica interactions like hydrophobic and electrostatic forces. Therefore, we characterized protein-silica interaction using two forms of phytochrome (124 kDa) having different hydrophobicity and surface charge. PH and ionic strength affected the retention time of phytochrome suggesting that electrostatic force is the major interaction between protein and silica surface.

• Environmental Engineering Research
• /
• 제12권5호
• /
• pp.224-230
• /
• 2007

The objectives of this study were to evaluate the change of molecular weight (MW) profiles in natural organic matter (NOM) through various treatment processes (coagulation, granular activated carbon (GAC), and ozonation) using high performance size exclusion chromatography based on ultraviolet absorbance and dissolved organic detection (HPSEC-UVA-DOC). In addition, relationships between MW profiles and disinfection by-production (DBP) formation were evaluated. Each treatment process results in significant different effects on NOM profiles. Coagulation is effective to remove high molecular weight NOM, while GAC is effective to remove low molecular weight NOM. Ozonation removes only a small portion of NOM, while it induces a significant reduction of UV absorbance due to breakdown of the aromatic groups. All treated waters are chlorinated, and chlorination DBPs such as trihalomethanes (THMs) and haloacetic acids (HAAs) are measured under formation potential conditions. Both THM and HAA formation potentials were significantly reduced through the coagulation process. GAC was more effective to reduce THM formation compared to HAA formation reduction, while ozonation showed significant HAA reduction compared to THM reduction.

• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.439-444
• /
• 2005

This article describes the change in the hand value of chitosan-crosslinked cotton fabrics. The chitosan-crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH), 2% aqueous acetic acid and 20% aqueous sodium hydroxide. It proposed that the crosslinking and mercerizing were performed with the mixture of four different molecular weight chitosan and ECH in a single step. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle roller, pre-dried at $130^{\circ}C$, mercerized and crosslinked in NaOH solution and finally washed and dried. Mechanical and physical properties of the chitosan crosslinked fabric were measured on concentration and molecular weight by Kawabata Evaluation System(KES) and other instruments. As the concentration of chitosan solution increased, LT, WT, B, 2HB were increased. WT, B, 2HB, MIU, SMD, $T_0$, $T_m$ were decreased when chitosan was depolymerized. On the other hand, RT was increased when chitosan was depolymerized.

• 한국식품영양과학회지
• /
• 제14권2호
• /
• pp.157-163
• /
• 1985

Various cell wall polysaccharides and related enzyme activities in hot pepper fruit were determined at different stages of maturity. The uronic acid content of cell walls decreased between immature green and turning stage fruit and then increased by red ripe stage. In contrast, cellulose content of cell walls changed only a little during ripening. Total neutal sugar content of cell wall material decreased 50% and galactose content of the walls decreased about 80% by the turning stage. Polygalacturonase and ${\beta}-galactosidase$ activities, as well as total hemicellulose from isolated cell walls of ripening hot pepper fruit were studied using gel filtration chromatography. Polygalacturonase activity was not detectable but 5 isozymes of ${\beta}-galactosidase$ were resolved. The activities of the enzymes were relatively high and gel filtration showed that they differed in molecular weight. Hemicellulose content decreased during ripening and softening. The molecular weight profiles shifted from high molecular weight to low molecular weight polymers during ripening. The changes in cell walls that may be associated with fruit softening involve the alteration of hemicellulose prior to the degradation of wall-bound uronic acid. It is suggested that the decrease in cell wall galactose involved changes in turnover of new cell wall components.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권2호
• /
• pp.99-105
• /
• 2010

In this paper, the regenerated silk fibroins were dissolved in LiBr aqueous solution with different dissolution temperature and time, and the effects of the dissolution condition on the regeneration yield, molecular weight, wet spinnability, and electrospinnability of regenerated silk fibroin were investigated. The regeneration yield, molecular weight distribution, and wet spinnability of regenerated silk fibroin were nearly affected by the dissolution temperature and time. However, the electrospinning performance of silk fibroin was influenced by the dissolution condition implying the electrospinning of silk fibroin is more sensitive process than the wet spinning in the range tested in this study. While $25^{\circ}C$ of dissolution temperature resulted in a good electrospinnability of regenerated silk fibroin, the electrospinnability was slightly deteriorated when silk fibroin was dissolved at $60^{\circ}C$ for 6 hours. Also, though the fiber diameters of electrospun silk fibroin produced by the dissolution at $25^{\circ}C$ for 6 hours and 24 hours were 443 and 451 nm, respectively, that at $60^{\circ}C$ for 5 min was reduced to 411 nm. The fiber diameter was more decreased to 393 nm when the dissolution time increased up to 6 hours at $60^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.302-304
• /
• 1997

Chemical structure and electrical properties such as water treeing and space charge accumulation of various raw materials(XLPE) used for power cable insulation were investigated. It was found that chemical structure was changed after crosslinking reaction and every materials have different amounts of DCP and antioxidant. Electrical properties were also changed after extraction using $CHCl_3$ and xylene. Water tree length was smaller with additives such as DCP and antioxidant and bigger with low molecular weight components of polyethylene than that of extracted samples. Heterocharge was changed into homocharge after extraction. This shows that additives and low molecular weight components of polyethylene cause the heterocharge.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제23권1호
• /
• pp.183-186
• /
• 2011

The various molecular weight (MW) regenerated silk fibroins were prepared with different dissolution condition and the effect of MW on the gelation behavior of regenerated aqueous silk fibroin (SF) solution was investigated. The result of gelation time measurement indicated that the gelation of SF aqueous solution was accelerated by the increase of MW and SF concentration. When formic acid was added in SF aqueous solution, the gelation time of SFL and SFC30 aqueous solution showed a significant decreaseat 0.03% formic acid addition. In case of the lowest MW sample, SFC180, SF molecules became aggregated and precipitated without gelation after 28 days storage time. These findings indicate that MW control of SF can be utilized to control the gelation time of SF aqueous solution.

• Archives of Pharmacal Research
• /
• 제19권2호
• /
• pp.100-105
• /
• 1996

Polyethylene glycols (PEGs; 400, 600, and 1000) were used to study the molecular weight (MW) permeability dependence in the rat ileal mucosa. Absorption of the PEGs was measured by following their recirculation perfusion over a 3 hr collection period. HPLC methods were used to separate and quantitate the individual oligomers present in the solution of PEGs mixtures (MW range 330 to 1 1 22 D). In the range studied, a distinct molecular weight cutoff was not identified. Corrected for the length of ileum used in the study, over the molecular weight range 330 to 1122 D, the apparent permeability $(P_{app)$ of PEG ranged from $3.2\pm0.06\times10_{-5} cm/sec(mean\pmSEM, n=7)\; to\; 0.1\pm0.02\times10^{-5} cm/sec.$ Also, it was observed that the apparent permeability was inversely proportional to approximately $MW^{2.4}$.