• Title/Summary/Keyword: different media

Search Result 3,627, Processing Time 0.03 seconds

Static and dynamic elastic properties of the Iksan Jurassic Granite, Korea (익산 쥬라기 화강암의 정 및 동탄성학적 특성)

  • Kang, Dong-Hyo;Jung, Tae-Jong;Lee, Jung-Mo
    • Journal of the Korean Geophysical Society
    • /
    • v.3 no.2
    • /
    • pp.99-112
    • /
    • 2000
  • The Iksan Jurassic Granite shows relatively less fractures and homogeneous rock fabrics, and is one of the most popular stone materials for architectures and sculptures. Almost mutually perpendicular rift, grain, and halfway in the Iksan Jurassic Granite are well known to quarrymen based on its splitting directions, and therefore it should exhibit orthorhombic symmetry. Theoretically, there are 9 independent elastic stiffness coefficients $(C_{1111},\;C_{2222},\;C_{3333},\;C_{2323},\;C_{1313},\;C_{1212},\;C_{1122},\;C_{2233},\;and\;C_{1133})$ for orthorhombic anisotropy. In order to characterize the static and dynamic elastic properties of the Iksan Jurassic Granite, triaxial strains under uniaxial compressive stresses and ultrasonic velocities of elastic waves in three different polarizations are measured. Both experiments are carried out with six directional core samples from massive rock body. Using the results of experiments and the densities measured independently, the static and dynamic elastic coefficients are computed by simple mathematical manipulation derived from the governing equations for general anisotropic media. The static elastic coefficients increase ar uniaxial compressive stress rises. Among those, the static elastic coefficients at uniaxial compressive stress of a 24.5 MPa appear to be similar to the dynamic elastic coefficients under ambient condition. Although some deviations are observed, the preferred orientations of microcracks appear to be parallel or subparallel to the rift, the grain, and the hardway from microscopic observation of thin sections. This indicates that the preferred orientations of microcracks cause the elastic anisotropy of the Iksan Jurassic Granite. The results are to be applied to the effective use of the Iksan Jurassic Granite as stone materials, and can be used for the non-destructive safety test.

  • PDF

Studies on the Growth and nutritional Behaviors of Seedlings Sand Cultured at Different pH Levels (pH 수준별(水準別) 사경묘목(砂耕苗木)의 생장(生長)과 영양동태(營養動態)에 관(關)한 연구(硏究))

  • Son, Won Ha
    • Journal of Korean Society of Forest Science
    • /
    • v.11 no.1
    • /
    • pp.1-24
    • /
    • 1970
  • This experiment was carried out to elucidate the behavior of nutrition absorption and the acid tolerance, on varying soil pH levels, of Pinus thunbergii, Pinus densiflora, Pinus rigida, PInus koraiensis, Larix leptolepis and Abies holophylla which are 6 month old seedlings through examinations of the absorption behavior, the acid and alkali tolerance of N,P,K, Ca and Fe in the sand culture media with artificially controlled pH. 1. The increase rate of dry matter conditioned by the behavior of nutrition absorption in a strong acidic condition (pH3) was found in the following decreasing order of Pinus rigida, Pinus thunbergii. This order, therefore, can also be said to apply to the case of acid tolerance. 2. The increase rate of dry matter in a strong alkaline condition (pH9) was found in the following decreasing order of Pinus thunbergii, Pinus rigida, Pinus densiflora, Pinus koraiensis, Abies hoplohylla, Larix leptolepis. This order, therefore can be said to apply to the case of alkali tolerance. 3. Considering the absorption behavior of K and Ca, it is possible to decide the tolerance of acid from the absorption behavior and it can be said that if the absorption quantity is K>Ca the acid tolerance is strong and vice versa. 4. Considering the ratio of K:Fe and Ca:Fe in this experiment, a strong acid tolerance shows a higher ratio of K/Fe and vice versa. And also a strong acid tolerance shows a lower ratio of Ca/Fe and vice versa. It is therefore possible to decide the acid tolerance from the absorption behavior of K, Ca and Fe. 5. Of the tree species subjected to this experiment, Pinus thunbergii was the strongest in both acid and alkali tolerance. 6. In spite of that in all species the dry weight in the root is smailer than that in the top, the quantity of Fe contained in the root was larger than that in the top.

  • PDF

Effect of Cryopreservation Day on Pregnancy Outcomes in Frozen-thawed Blastocyst Transfer (동결 해동한 포배 이식에 있어서 동결시기가 임신결과에 미치는 영향)

  • Kim, Hyun-Jung;Kim, Chung-Hyon;Lee, Joong-Yeup;Kwon, Jae-Hee;Hwang, Do-Yeong;Kim, Ki-Chul
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.37 no.1
    • /
    • pp.57-64
    • /
    • 2010
  • Objectives: Likewise fresh cycle, it is also important to select right blastocysts for transfer in purpose of improving the pregnancy and implantation rates in frozen-thawed embryo transfer (ET) cycles. To investigate the relationship between the developmental velocity at the time of cryopreservation and pregnancy rates, we compared pregnancy rates between the day 5 cryopreservation group and the day 6 cryopreservation group. Methods: Transfers of frozen-thawed blastocysts which had been cryopreserved by vitrification on day 5 or day 6 were performed between January 2006 and June 2007. Ethylene glycol, DMSO, and pull and cut straws were used for vitrification and artificial shrinkage was done in expanded blastocysts. Thawing was performed on the day before transfer and thawed blastocysts were cultured in for 15~18 hrs in Quinn's blastocyct media. Blastocyst survival was assessed before transfer and post-thaw survival was defined as >50% of cells remaining intact and blastocoele re-expansion by the time of transfer. Results: Transfers of thawed blastocyst had been cryopreserved on day 5 were 52 cycles and 41 transfer cycles were cryopreserved on day 6. Patient characteristics, the number of transferred embryos and the survival rate of thawed blastocysts were not different in each cryopreservation day. But the biochemical pregnancy, clinical pregnancy, ongoing pregnancy, and implantation rate were significantly high in transfer of frozen-thawed blastocyst which were cryopreserved on day 5. Conclusions: The clinical pregnancy and implantation rate of day-5 blastocyst showed significantly higher than those of day-6 blastocyst in frozen-ET cycles. This result indicated that developmental rate of blastocyst at cryopreservation time in frozen-thawed cycle is discriminative marker of pregnancy outcome as like in fresh cycle.

Designing Mobile Framework for Intelligent Personalized Marketing Service in Interactive Exhibition Space (인터랙티브 전시 환경에서 개인화 마케팅 서비스를 위한 모바일 프레임워크 설계)

  • Bae, Jong-Hwan;Sho, Su-Hwan;Choi, Lee-Kwon
    • Journal of Intelligence and Information Systems
    • /
    • v.18 no.1
    • /
    • pp.59-69
    • /
    • 2012
  • As exhibition industry, which is a part of 17 new growth engines of the government, is related to other industries such as tourism, transportation and financial industries. So it has a significant ripple effect on other industries. Exhibition is a knowledge-intensive, eco-friendly and high value-added Industry. Over 13,000 exhibitions are held every year around the world which contributes to getting foreign currency. Exhibition industry is closely related with culture and tourism and could be utilized as local and national development strategies and improve national brand image as well. Many countries try various efforts to invigorate exhibition industry by arranging related laws and support system. In Korea, more than 200 exhibitions are being held every year, but only 2~3 exhibitions are hosted with over 400 exhibitors and except these exhibitions most exhibitions have few foreign exhibitors. The main reason of weakness of domestic trade show is that there are no agencies managing exhibitionrelated statistics and there is no specific and reliable evaluation. This might cause impossibility of providing buyer or seller with reliable data, poor growth of exhibitions in terms of quality and thus service quality of trade shows cannot be improved. Hosting a lot of visitors (Public/Buyer/Exhibitor) is very crucial to the development of domestic exhibition industry. In order to attract many visitors, service quality of exhibition and visitor's satisfaction should be enhanced. For this purpose, a variety of real-time customized services through digital media and the services for creating new customers and retaining existing customers should be provided. In addition, by providing visitors with personalized information services they could manage their time and space efficiently avoiding the complexity of exhibition space. Exhibition industry can have competitiveness and industrial foundation through building up exhibition-related statistics, creating new information and enhancing research ability. Therefore, this paper deals with customized service with visitor's smart-phone at the exhibition space and designing mobile framework which enables exhibition devices to interact with other devices. Mobile server framework is composed of three different systems; multi-server interaction, server, client, display device. By making knowledge pool of exhibition environment, the accumulated data for each visitor can be provided as personalized service. In addition, based on the reaction of visitors each of all information is utilized as customized information and so the cyclic chain structure is designed. Multiple interaction server is designed to have functions of event handling, interaction process between exhibition device and visitor's smart-phone and data management. Client is an application processed by visitor's smart-phone and could be driven on a variety of platforms. Client functions as interface representing customized service for individual visitors and event input and output for simultaneous participation. Exhibition device consists of display system to show visitors contents and information, interaction input-output system to receive event from visitors and input toward action and finally the control system to connect above two systems. The proposed mobile framework in this paper provides individual visitors with customized and active services using their information profile and advanced Knowledge. In addition, user participation service is suggested as well by using interaction connection system between server, client, and exhibition devices. Suggested mobile framework is a technology which could be applied to culture industry such as performance, show and exhibition. Thus, this builds up the foundation to improve visitor's participation in exhibition and bring about development of exhibition industry by raising visitor's interest.

Plant regeneration and soil acclimatization through photoautotrophic culture from leaf explant of a rare species in Sedum tosaense Makino (희귀수종인 주걱비름(Sedum tosaense Makino)의 잎절편으로부터 기내 식물체 재분화 및 광독립배양을 통한 토양순화)

  • Ko, Myoung-Suk;Bae, Kee Hwa;Song, Gwanpil;So, In Sup
    • Journal of Plant Biotechnology
    • /
    • v.40 no.2
    • /
    • pp.79-87
    • /
    • 2013
  • The aim of this study was to establish plant regeneration from leaf explants of Sedum tosaense Makino, which is globally rare and endangered species. The leaf explants of S. tosaense were cultured on the MS medium supplemented with different concentration of BA and NAA for callus induction. Callus induction was showed the highest (100%) on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA. The highest number of shoots were regenerated when callus were cultured on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA for 5 weeks. The axillary bud were cultured on the MS media supplemented with combination of BA and NAA for in vitro propagation. The highest number of adventitious shoot (7.9 per explants) formed at $1.0mg{\cdot}L^{-1}$ NAA and $2.0mg{\cdot}L^{-1}$ BA. For rooting, MS medium supplemented with or without $2.0g{\cdot}L^{-1}$ activated charcoal was tested. The optimal results were observed using MS medium supplemented with $2.0g{\cdot}L^{-1}$ activated charcoal, on which 85.7 (No. of root), 4.6 cm (length of root). 1,200 ppm $CO_2$ and 350 ppm $CO_2$ were supplied for make certain the effects of $CO_2$ on pre-acclimatization by photoautotrophic culture. 1,200 ppm $CO_2$ treatment was established higher than 350 ppm $CO_2$ treatment. Soil acclimatization of in vitro plantlets was the best in mixture soil consisted of peat moss and perlite with 100% survival rate and they showed the maximum growth.

Investigation of some harmful bacteria in commercial Kimchi (시판김치 중 유해세균의 조사)

  • Shin Sun-Mi;Park Ju-Yeon;Kim Eun-Joung;Hahn Young-Sook
    • Korean journal of food and cookery science
    • /
    • v.21 no.2 s.86
    • /
    • pp.195-200
    • /
    • 2005
  • Three different commercial Kimchi industry-made packaged, department store-made and ordinary market-made were analyzed for their pH, acidity and microbiological characteristics including certain harmful bacteria on selective media during a storage-fermentation period of 7 days at $2^{\circ}C\;or\;20^{\circ}C$ The pH of all the Kimchi samples wasdecreased from 5.85 to 3.82 and their total acidities increased from 0.2 to 1.18 as the fermentation continued during the storage-fermentation. E. coli and Salmonella sp. of $0\~1101$ cfu/mL were found in the industry-made Kimchi just after purchase time. As the storage-fermentation proceeded, the viable numbers of these bacteria had been reduced in all Kimchi samples tested and no bacteria were detected after 5 days at $2^{\circ}C$ and 2 days at $20^{\circ}C$, respectively. On the other hand, a range of $7.9102\~2.9103$ cfu/mL of Staphylococcus sp. was detected in the department store-made and ordinary market-made Kimchi samples at the purchase time, which was higher than that of the industry-made Kimchi, and this range wasn't reduced during storage-fermentation. The viable number of yeasts in the market-made Kimchi was 2.1103 cfu/mL. These results suggest that some commercial Kimchis were contaminated by some harmful bacteria and that a portion of these bacteria remained alive in the Kimchi, even with high acidity during the edible period.

Development of Pharmaceutical Dosage Forms with Biphasic Drug Release using Double-Melt Extrusion Technology (이중 고온용융 압출 성형된 이중 방출능을 가지는 제형의 개발)

  • Kim, Dong-Wook;Kang, Chin-Yang;Kang, Changmin;Park, Jun-Bom
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.9
    • /
    • pp.228-234
    • /
    • 2016
  • The aim of this study was to develop pharmaceutical dosage forms with a bi-phasic drug using a double extrusion approach. Hot melt extrusion was performed using a co-rotating twin-screw extruder. The. 1st melt extrusion was performed using polymer with a relatively higher Tg, such as HPMC and the 2nd melt extrudate was obtained using the 1st extrudate and polymers with a lower Tg, such as HPMC-AS and PEO. In addition, the formulation with all the content in the same proportion as the double extudate was produced using single extrusion for comparison. Physical characterization was performed on the formulations employing differential scanning calorimetry (DSC). In vitro release tests were studied using a USP Type-I apparatus at $37{\pm}0.5^{\circ}C$ and 100 rpm. The similarity factor (f2) was also used to check the difference statistically. The DSC results indicated that the crystallinity of ibuprofen was changed to an amorphous state after extrusion in both double and single melt extrusion. Double melt extrudate with ibuprofen showed the desired release in acidic media (pH 1.2) in the first two hours and basic (pH 6.8) during six hours. Double melt extrudate with glimepiride showed faster release in 60 min of over 80%, whereas the single extrudate with glimepiride showed retarded release due to the interaction with HPMC. The similarity factor(f2) value was 28.5, which demonstrates that there were different drug release behavior between the double and single extrusion. Consequently, the double melt extrudated formulation was robust and gave the desired drug release pattern.

A Study on Art's Public Features and Social Intervention by Keith Haring (미술의 공공성과 키스 해링(Keith Haring)의 사회적 개입에 관한 연구)

  • Kim, Jee-Young
    • The Journal of Art Theory & Practice
    • /
    • no.8
    • /
    • pp.59-87
    • /
    • 2009
  • This thesis started from the attempt to make it clear that 80's American artist Keith Haring(1958-1990) had conducted social intervention of criticism, resistance, and participation through his works, and so pursued public value. Haring of graffiti fame left popular and familiar cartoon style pictures on the street wall, the billboards, the posters and so on. Popular and playful works was explained as his unique characteristics, but Haring's creative way at the field has more value than just being grasped as artist's personal characteristics. Haring's work pieces became everyday art by joining with people's life, and are working as a social speaking place. So I think that these Haring's art works possess characteristics of 'the public sphere'. 'The Public Sphere' means that is independent and free from the government or partisan economic forces, so that is not connected with the interested relations, and that is the sphere of rational argumentation without 'disguise' or 'fabrication', and that is the sphere where general public can participate in and is inspected by them. The public sphere between the sphere of public authority such a nation and a market and the private sphere of free individual, it is mutually connected with them and works as the space forming public opinion. Private individuals communicate with this public sphere and perform a role of direct and indirect check, balance, and social criticism way off from power. Openness that should include the voice of not only leading power but also the socially weak such as citizens, women, homosexuals, minority races, and so on, and alienated class, is an index of the public characteristics. The public sphere is not working just with speech and mass media. Many artists as well as Haring open their mouth and act through an art at the center of society, and create another public sphere by an art. I understood that the real participatory and practical characteristics on the Haring's work is a phenomenon and current of a part of the art world including Haring. Such current started from 1960s is the in-depth effort to be connected with the life more closely, to communicate with people, and to improve problems of life. And it has pursued public value on the different way from the nation or public power. Artists have intervened in the society with strategic and positive ways in order to raise pushed-out value and sinked rights as the public agenda, and labored to accept the value of variety and difference at the society. The aspect of such social intervention is the notable features, findable on the Haring's works and process. Haring's works include art historical meanings and are expressed with familiar and plastic language, so they were able to communicate with various classes. And he secured various customers at the field and the street. This communicative and public approach factor raised the possibility much for his works to work as the public sphere. Haring presented critical and resistant speech toward society with his works based on this factor. He asserted his position and justice of gender identity as a sexual minority. And his such work continued to movement for alienated class and social week over his own rights. His speech and message on the wall painting, poster, T-shirts, billboard of the subway, and so on worked as a spectacle and pressed concern with social issues and consciousness shift. And he's been trying to protect and care people who is injured by HIV and drug and to realize social justice through social week protection. Haring's works planned to meet many people as much as possible performed its role of intervening in society through criticism, resistance, speech, and participation, and controlling and checking social issues. These things considered, Haring's works show his consciousness about public attributes of art, and obviously include public value seeking. And also we can find the meaning of such his work as that an art is working as the public sphere and shows the possibility to discuss and practice public issues.

  • PDF

Cryopreservation of Umbilical Cord as a Source of Mesenchymal Stromal Cells and Growth Factors (간엽줄기세포와 성장인자의 공급원으로서 제대 조직의 동결 보관)

  • Lee, Hye Ryun;Roh, Eun Youn;Shin, Sue;Yoon, Jong Hyun;Kim, Byoung Jae;Jeon, Hye Won
    • The Korean Journal of Blood Transfusion
    • /
    • v.23 no.2
    • /
    • pp.115-126
    • /
    • 2012
  • Background: Umbilical cord (UC) is a promising source of mesenchymal stromal cells (MSCs). We compared the characteristics of MSCs from cryopreserved UC with those from fresh tissues, and demonstrated the possibility of UC cryopreservation for acquisition of MSCs from cryopreserved UC. Methods: Each UC was sliced into two types ($1{\sim}2mm^3$ vs. 0.5 cm), and cryopreserved in liquid nitrogen using different media (autologous cord blood plasma, aCBP vs. RPMI 1640). A fresh aliquot of $1{\sim}2mm^3$-sized UC was used as control tissue. After one week, the cryopreserved tissues were thawed and cultured. For the 0.5 cm UC, a slicing step into $1{\sim}2mm^3$ was needed. Cell count, viability, proliferative activity, and surface antigens were determined from harvested MSCs. Several growth factors (EGF, IGF-1, PDGF, TGF-${\beta}$, bFGF, and VEGF), were measured from the culture supernatant. Results: Eleven UC were enrolled in the study. Efficiencies of obtaining MSCs were higher in cryopreserved UC using RPMI 1640, compared with use of aCBP; the same result was observed for 0.5 cm sized UC, compared with $1{\sim}2mm^3$ sized UC. No difference in proliferative activity was observed between MSCs from fresh and cryopreserved UC. The amount of growth factors in culture supernatant using RPMI 1640 was larger than that of fresh tissues. Conclusion: We obtained growth factors from the supernatant as well as MSCs from cryopreserved UC. As with a cord blood bank, in the future, cryopreservation of UC for acquisition of both MSCs and growth factors would be possible in a time of need.

An Interdisciplinary Approach to the Human/Posthuman Discourses Emerging From Cybernetics and Artificial Intelligence Technology (4차 산업혁명 시대의 사이버네틱스와 휴먼·포스트휴먼에 관한 인문학적 지평 연구)

  • Kim, Dong-Yoon
    • Journal of Broadcast Engineering
    • /
    • v.24 no.5
    • /
    • pp.836-848
    • /
    • 2019
  • This paper aims at providing a critical view over the cybernetics theory especially of first generation on which the artificial intelligence heavily depends nowadays. There has been a commonly accepted thought that the conception of artificial intelligence could not has been possible without being influenced by N. Wiener's cybernetic feedback based information system. Despite the founder of contemporary cybernetics' ethical concerns in order to avoid an increasing entropy phenomena(social violence, economic misery, wars) produced through a negative dynamics of the western modernity regarded as the most advanced form of humanism. In this civilizationally changing atmosphere, the newly born cybernetic technology was thus firmly believed as an antidote to these vices deeply rooted in humanism itself. But cybernetics has been turned out to be a self-organizing, self-controlling mechanical system that entails the possibility of telegraphing human brain (which are transformed into patterns) through the uploading of human brain neurons digitalized by the artificial intelligence embedded into computing technology. On this background emerges posthuman (or posthumanism) movement of which concepts have been theorized mainly by its ardent apostles like N. K. Hayles, Neil Bedington, Laurent Alexandre, Donna J. Haraway. The converging of NBIC Technologies leading to the opening of a much more digitalizing society has served as a catalyst to promote the posthuman representations and different narratives especially in the contemporary visual arts as well as in the study of humanities including philosophy and fictional literature. Once Bruno Latour wrote "Modernity is often defined in terms of humanism, either as a way of saluting the birth of 'man' or as a way of announcing his death. But this habit is itself modern, because it remains asymmetrical. It overlooks the simultaneous birth of 'nonhumaniy' - things, or objects, or beasts, - and the equally strange beginning of a crossed-out God, relegated to the sidelines."4) These highly suggestive ideas enable us to better understand what kind of human beings would emerge following the dazzlingly accelerating advancement of artificial intelligence technology. We wonder whether or not this newly born humankind would become essentially Homo Artificialis as a neuronal man stripping off his biological apparatus. However due to this unprecedented situation humans should deal with enormous challenges involving ethical, metaphysical, existential implications on their life.