• Journal of Life Science
• /
• v.25 no.4
• /
• pp.390-396
• /
• 2015

This study was carried out to investigate the action of phytohormones which influence the adventitious root formation of calli originating from the leaves of Persicaria perfoliata. The optimal medium condition for callus formation was ½-strength MS, 1% sucrose, and 4.5 μM 2,4-D. In order to determine which phytohormones had an effect on the adventitious root formation, the calluses were cultured in various media with different kinds of phytohormones. As a result, the medium with GA₃ or IAA was shown to induce root formation. To deeply investigate the effects of GA₃ and IAA, calli were cultured in 0.1, 1, and 10 mg/l levels of phytohormones. Numbers of roots formed per callus were 10.9, 14.2, 22.6 in GA₃, 5.8, 3.9, 1.1 in IAA, respectively. Therefore, the higher GA₃ or the lower IAA concentration, the more roots formed. To confirm this role of GA₃ we tested with inhibitors PBZ and NPA. GA₃ with PBZ resulted in reduction by 52.4~69.4% compared to GA₃ alone. In contrast, GA₃ with NPA resulted in an increase by -8~45.6% compared to GA₃ alone in root formation. Also, results were determined on the effect of GA₃ with other phytohormones on root formation. Kinetin, 2iP and ABA with GA₃ had a negative effect, but IAA with GA₃ showed a similar result to GA₃ alone. From these results we infer GA plays a key role and auxin has subsidiary activity on adventitious root formation. This is the first report that indicates GA₃ promotes adventitious root formation from calli in P. perfoliata.

• Korean Journal of Microbiology
• /
• v.53 no.1
• /
• pp.29-38
• /
• 2017

In this study, we investigated the phylogenetic diversity of the bacterial community and isolation of extremely halophilic bacteria using culturomics in a gray solar saltern. The number of bacterial living cells, enumerated in a gray solar saltern by direct fluorescence microscopy was three to four orders of magnitude greater than those enumerated by plate counts, suggesting the distribution of 'viable but non-culturable bacteria'. The biodiversity of bacterial communities in a gray solar saltern was investigated by pyrosequencing, 1,778 OTUs of bacteria were comprised of 18 phyla 46 classes 85 orders 140 families 243 genera with 6.16 diversity index. Archaea communities were composed of 3 phyla 6 classes 7 orders 7 families 38 genera with 4.95 diversity index from 643 OTUs. Totally 137 isolates were isolated by 59 different cultural methods based on culturomics considering culture media and conditions suitable for the growth of extremely halophilic bacteria. Phylogenetic analyses of extremely halophilic isolates based on 16S rRNA gene sequences, extremely halophilic isolates were composed of 4 phyla and 11 genera. Haloterrigena and Haloferax can be successfully isolated from culturomics. These culturomics were effective methods for collection of diversity of extremely halophilic bacteria.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.1-7
• /
• 1998

In order to find relationship within and between entomopathogenic species, analysis of protein band pattern in mycelia of 25 isolates was conducted by UPGMA. The results allowed differentiation of three groups on 85% similarity coefficient. Similarity coefficient within C. militaris was $0.787{\sim}1.000$, C. kyushuensis was 0.958-1.000 and C. pruinosa was 0.993-1.000. C210 and C298 isolates which had somewhat immersed perithecia, comparable to other C. militaris isolates, had 91% similarity. C108, C225-1 and C228 isolates pathogenic on Lepidopterous larvae had 89% similarity. Closely related species to C. militaris were C. kyushuensis and C. pruinosa. And similarity between C. pruinosa and C. kyushuensis was 88%. Similarity between C. bifusispora formed conidia on media and Paecilomyces tenuipes was 89%. C. scarabaeicola pathogenic specifically on adult Scarabaeidae had 82% similarity with above two species. C118 identified as C. militaris showed different protein banding patterns.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.475-481
• /
• 1995

The effect of metallothionein expression on the metal resistance and removal by recombinant Saccharomyces cerevisiae containing the plasmid pJW9 was investigated. The recombinant strain S. cerevisiae BZ-pJ was constructed by transforming the host strain S. cerevisiae BZ3l-1-7Ba with the gene coding for a metal-binding protein, metallothionein. Introduction of the MT gene yielded an increase in the minimum inhibitory concentration (MIC) of copper more than three times compared with the host strain. The minimum inhibitory concentrations of $Cr^{2+}, Znr^{2+} and Pb^{2+}, $ were not different for the two strains. The recombinant yeast grown in a medium containing 8mM CuSO4 was able to remove copper with a capacity of 18.9mg $Cu^{2+}$/g dry cell. In a mixture of copper and zinc, the presence of copper relieved the toxic effects caused by zinc, resulting in an enhancement of the final cell density and the specific growth rate of the recombinant yeast. The capability to remove copper by the recombinant yeast was linearly proportional to the copper concentrations in the medium. The efficiency of copper removal was rather constant regardless of the initial copper concentrations. The specific removal of zinc was dependent on the zinc concentrations in media, though, and such dependence was not so pronounced as the concentration of copper.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.429-436
• /
• 2010

Keratinase is widely used in certain industrial applications. The present study sought to improve the culture conditions of Bacillus subtilis SMMJ-2 to facilitate mass production of keratinase. Strain SMMJ-2 was irradiated by ultraviolet light and the resulting isolates were tested for keratinase activity. Isolates displaying elevated keratinase activity were selected and used to determine the optimum temperature (24, 30, 37, 45, $55^{\circ}C$) for bacterial keratinase production during a 4 day incubation period. The highest enzyme activity (55 units/mL/min), from a Bacillus subtilis SMMJ-2 mutant (mutant No. 2) was demonstrated following incubation at $30^{\circ}C$. The effects of carbon and nitrogen sources on keratinase production were confirmed by measuring the enzyme activity from the culture broth of the mutant strain cultured in various media containing different carbon source and nitrogen sources during a 4 day period. The optimal medium composition for producing keratinase consisted of 1% glucose, 0.7% $K_2HPO_4$, 0.2% $K_2HPO_4$, and 1.2% soybean meal. Optimal initial pH and temperature for producing keratinase were 7.0 and $30^{\circ}C$, respectively. Keratinases produced by B. subtilis SMMJ-2 and the mutant No. 2 were purified from the culture broth which used soybean meal as a nitrogen source. Membrane ultrafiltration, DEAE-sephacel ion exchange and Sephadex G-100 gel chromatography were used to purify the enzymes. The purified keratinases from both B. subtilis SMMJ-2 and the mutant No. 2 showed single bands and their molecular weights were estimated as 28 kDa and 42 kDa, respectively on SDS-polyacrylamide gel electrophoresis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1185-1194
• /
• 2012

This paper proposes a new terrestrial 3DTV broadcasting standard specification based on synchronization with non-real-time contents in order to overcome quality limitations of the current 3DTV services that are arisen from the limited bandwidth of the legacy broadcasting channel. In the services using the proposed specification, one view sequence of a stereoscopic video content is delivered as a non-real-time content in idle time, and the other view sequence is transmitted in real time broadcasting signal, thereafter two sequences are synchronized in a receiver for display. Thus, it is possible to provide higher-quality stereoscopic video content services than the current 3DTV services. In order to realize these services, a new mechanism is required which enables synchronization between the data that are from different transmission media and time. Therefore, this paper suggests a solution by multiplexing the synchronization signals of non-real-time contents into broadcasting signals with real-time streams together. This solution can provide a accurate synchronization mechanism by minimum updates of legacy broadcasting systems while maintaining compatibility with legacy services.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2012

This study aims to analyse the research trend of the participants in Emotional Science in Korea and to suggest a desirable direction of research. I analysed the 1,262 articles published in Korean Journal of the Science of Emotion and Sensibility from 2000 to 2011 according to fields of study and keywords. The findings from the study are as follows. In the fields of study regarding Clothing Design, Psychology, Medicine, Visual Media, Brain Science they are still the top rated categories amongst participants. With the participation of Industrial Engineering and Ergonomics they have shown a meaningful difference depending on governmental support such as G7 Project. The problem with Industrial Design is that the majority of studies have been performed alone, and they have many keywords which are not related with Emotional Science. However, 31 new fields of study have been added to the research making the findings more desirable considering that Emotional Science is typical interdisciplinary filed of study. I hope that this study will provide basic data which can be used to promote the interdisciplinary research between the different fields of study in order to generate significant synergy.

• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.237-242
• /
• 2003

These studies were carried out to establish an effective in vitro embryo transfer methods by analyzing several factors. The base media were TCM-199 solution for in vitro maturation(IVM) of bovine follicular oocytes and Fer-TALP solution for in vitro fertilization(IVF) and CRlaa medium for in vitro culture(IVC). IVC used the fertilized oocytes of 24-hr culture (day 1)after IVF. Embryos were cultured in drop-culture that contained 25 embryos per 10${mu}ell$. Blastocysts cultured for 7 to 9 in vitro were transferred to recipients. The results obtained were as follows: 1. The pregnancy rate according to different region of embryo transfer were 33.8％, 48.1％, 45.0％ and 35.3％ respectively. 2. The pregnancy rate according to the parity of recipient when embryos were transferred to nulliparous (42.9％) was higher than that of 1∼3nd parlous(36.9％), however there were not show significant difference each other. 3. According to the stage of blastocyst, the pregnancy rate when middle blastocysts (MB) (45.5％) were transferred to recipients were higher than that of late blastocysts (LB) (41.0％). 4. When IVF-derived blastocysts cultured for 7 to 9 day were transferred to recipients, the pregnancy rate was higher 7 day of blastocyst than that of 8 day or 9 day of blastocyst. The results of embryo transfer according to the regions, the parity of recipient and the development stage showed that blastocyst formed for 7day transferred to nulliparou were higher pregnancy rate than others.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.147-154
• /
• 1989

The experiments were carried out to compare the growth characteristics of excised seminal roots in Japonica type, Indica- Japonica hybrids and its parents. Based on the modified culture medium by Kawata et al., several levels of pH. sucrose and casamino acid were varied in the culture media. The excised root length at 27$^{\circ}C$ incubator was little different between Japonica type and Indica-Japonica hybrids, but at 30$^{\circ}C$ incubator the excised root elongation of Indica-Japonica hybrids was much better than that of Japonica type. The dry matter weight of excised root in Indica- Japonica hybrids was significantly heavier than in Japonica type at both 27 and 30$^{\circ}C$ incubators. The difference of dry root weight between Japonica type and Indica- Japonica hybrids was caused from the number of lateral roots, especially the root numbers of 25 cm length. The main and lateral seminal root growth of Japonica type grew best at the lot of 0.2 percent casamino acid. However, the lots of 0 and 0.2 percent casamino acid showed good results in the main and lateral excised root growth. respectively of Indica-Japonica hydrids. The growth of excised roots was better in Indica-Japonica hybrids than in Japonica type at even various levels of pH, sucrose and casamino acid. Between the parents of Indica - Japonica hybrids, the excised root growth of Indica type was more predominant than that of Japonica type, and the effect of casamino acid on the excised root growth in the formar was similar to that of Indica type. This result indicated that the growth characteristics of excised seminal roots in Indica Japonica hybrids were derived from the parent, Indica type.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.