• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.674-675
• /
• 2010

Since in web service composition, the same service may be offered by different providers with different Quality of Services (QoS) attributes, selection criteria are needed to select which Web Services will be considered for composition. Location of provider can be one of these criteria and intends to decrease the number of remote interactions between providers as well as reducing waiting time of service consumer. Therefore in this paper, we present technique for composing web services according to their location by semantically describing customer's goals and provider's web service capability by means of carefully designed ontology and logical expression.

• Information Systems Review
• /
• v.8 no.1
• /
• pp.265-285
• /
• 2006

The purpose of this research is to identify the major evaluation criteria of IT investment projects and establish the importance weights of criteria through AHP analysis. Seven evaluation criteria which have been drawn from prior studies and industry practices are direct costs, indirect costs, financial benefits, strategic value, risk, technical necessity, and political considerations. Data have been collected from 95 IT projects in 40 public organizations and private firms in Korea. After having applied the data reliability test, 79 projects have been selected. The results of AHP analysis show the importance weights and priorities of seven evaluation criteria as follows: financial benefits 25.2%, strategic value 22.36%, direct costs 14.34%, risk 12.10%, technical necessity 11.55%, political considerations 8.3%, and indirect costs 6.48%. And the weights of seven criteria shows considerable differences among three different IT project types such as transactional, informational, and infrastructural.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.261-267
• /
• 2021

As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.

• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.135-146
• /
• 2014

The purpose of this study is to explore evaluation criteria that pre-service elementary teachers employ as they evaluate and select models to explain electric circuits. Thirty junior students in a university of education have participated in the study as a part of the science education course in which they were enrolled. The lessons for the participants have been organized as a cyclic sequence of different modeling pedagogies including the expressive, experimental, and evaluative modeling. The pre-service teachers have been given five electric circuits in order and asked to create models and further develop them through peer discussion. Their modeling activities have been video- or audio-recorded, and the recordings and their transcripts have been analyzed using a framework of model evaluation criteria. It reveals that the types and frequencies of evaluation criteria used are different between situations of model development and model selection. While empirical and theoretical criteria have been used dominantly in both situations, more various criteria have been employed in the situation where the pre-service teachers selected one model among alternatives. Implications for science education and science education research have been suggested.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.335-343
• /
• 1998

Recently, new experimental criteria for reinforced concrete frame structures in high seismic regions have been reported in United States. The objective of the criteria is to get more reliable test data which are valid to compare with other test data done by different researchers. The criteria precribe test method of specimens, analysis method of test data, and limiting values needed to specimens like drift angle, energey dissipation ratio, stiffness, and strength. These criteria might be usefel to get objective conclusion. Shear wall structures, which belong to one of earthquake resisting systems, also need this kind of criteria. But, the general response of shear wall structures is a little bit different from that of frame structures since shear wall restrains the horizontal displacement caused by horizontal force and increases the stiffness and strength. The objective of this paper is to propose a criterion for limiting drift and energy dissipation ratio of shear walls based on structural testing. These are the most important values for presenting the capacity of shear walls. Limiting drift and energy dissipation ratios were examined for tests on shear walls having ductile type failures. Test data were analyzed and compared to the results for a suggested acceptance criteria that involve a limiting drift that is a function of aspect ratio and a limiting energy dissipation ratio that is a function of displacement ductility and damping.

• Journal of the Korean association of regional geographers
• /
• v.14 no.3
• /
• pp.199-211
• /
• 2008

This study looks into existing discussion about the entry time and the geographical criteria point of 'Ho-Nam' as a place name. And discusses the reason which the geographical criteria point is not clear with emphasis on the possibility of the geographical range change of place name. The result is as follows. Firstly, the regional criteria of 'Ho-Nam' is Kum-River if we consider direction and the role as a regional barrier among the existing offered criteria. Secondary, the criteria of Ho-Nam and Ho-Seo might be different each other. A place name of Ho-Nam had appeared before Chosun period as a geographical concept and changed to the cultural concept during Chosun period. And Ho-Seo was established in Chosun period. But 'Ho-Nam=Jeon-la Province' and 'Ho-Seo=Chung-cheong Province' is established during Chosun period as a cultural concept. Thirdly, the geographical range of Ho-Nam of Go-Ryeo period and Chosun period were different each other. Fourthly, the criteria of Ho-Nam may be the Han-River if we consider the entry time and geographical range change.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1571-1578
• /
• 2020

As a critical material in very/high-temperature gas-cooled reactors, graphite material directly affects the safety of the reactor core structures. Owing to the complex structures of graphite material in reactors, the material typically undergoes complex stress states. It is, therefore, necessary to study its mechanical properties, failure modes, and strength criteria under complex stress states so as to provide guidance for the core structure design. In this study, compressive failure tests were performed for graphite material under the condition of different confining pressures, and the effects of confining pressure on the triaxial compressive strength and Young's modulus of graphite material were studied. More specifically, graphite material based on the fracture surfaces and fracture angles, the graphite specimens were found to exhibit four types of failure modes, i.e., tension failure, shear-tension failure, tension-shear failure and shear failure, with increasing confining pressure. In addition, the Mohr strength envelope of the graphite material was obtained, and different strength criteria were compared. It showed that the parabolic Mohr-Coulomb criterion is more suitable for the strength evaluation for the graphite material.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.109-114
• /
• 2010

There are many business in complex building, and recently noise claims have increased in those buildings. It is one of the most desirable methods reducing the noise level to establish the noise criteria considering the admittable noise level between the source and receiving room, which are to be derived from the subjective response in the real conditions. Because the degree of annoyance and loudness for the intruding noises in complex building could be changed with background noise level, it is suggested to be researched the relationship between the noise levels and subjective response. In this study, the subjective response for three different background levels in receiving business or rooms were investigated for the typical eight business noise source including aerobic music. The results can be summarized as follows. In conditions of low background noise level(40 dB(A)), there is a tendency of intentionally attention situation (listening) in a subjective test. The other hand in conditions of relatively high background noise level(50 dB(A)), there is a unconscious situation (heraing). As the degree of moderately heard or annoyed in SD rating scale means that the noise is easily recognized in neighboring shops, usually the limit of noise criteria were decided on this rating point, so it will be reasonable to be adopted the criteria rating scale as slight heard or annoyed degree (SD criteria 3).