• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.246-253
• /
• 2007

The reproduction toxicity of several pesticides on two Korean water flea was investigated to develop a new standard species used for ecological risk assessment of pesticide. Moina macrocopa and Daphnia sp. were exposed to 4 different types of pesticides over 10 and 21 days, respectively. No-ohserved effect concentration (NOEC) for synthetic pyrethroid, fenpropathrin on Moina macrocopa and Daphnia sp. were 0.17 and $0.06\;{\mu}g\;L^{-1}$, respectively. Diazinon, carbofuran and myclobutanil were in the order of their reproduction toxicity to cladocerans tested. There were large differences between Moina macrocopa and Daphnia sp. in their susceptibility to fenpropathrin, diazinon and carbofuran except myclobutanil. Daphnia sp. is more sensitive than M. macrocopa to pesticides tested. Therefore Daphnia sp. may be a good surrogate species to assess the reproduction effect of pesticides on aquatic invertebrates. M. macrocopa also be a good surrogate species because it is one of the most abundant cladocera in agricultural environment, especially rice paddy in Korea. In addition to it's ecological importance of wide spread distribution, it has also economical importance to make possible to shorten period for reproduction test using M. macrocopa due to it's short life cycle.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.382-387
• /
• 2007

The approval of use of certain food-grade phosphates as food additives in a wide variety of meat products greatly stimulated research on the applications of phosphates in foods. Phytic acid is a natural plant inositol hexaphosphate constituting 1-5% of most cereals, nuts, legumes, oil seeds, pollen, and spores. In this study, we investigated antibacterial activity of sodium phytate (SPT) against Salmonella typhimurium in tryptic soy broth with different pHs and in chicken, pork and beef. In tryptic soy broth, SPT at the concentrations of 0.1, 0.5, and 1.0% effectively inhibited the growth of Salmonella typhymurium in a concentration-dependent manner. At pH 5.5-7.0 similar to meat pHs, 1% SPT almost completely inhibited the bacterial growth. The inhibitory effect of SPT was stronger at pH 7.0 than pH 5.5. In chicken, pork, and beef, SPT at the concentrations of 0.1, 0.5, and 1% significantly inhibited the growth of Salmonella typhimurium in a dose-dependant manner (p<0.01). The addition of 1% SPT in the meats significantly increased the meat pHs. These results indicate that SPT is very effective for inhibition of bacterial growth as a muscle food additive for increasing food safety and functions.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.544-552
• /
• 2011

The purpose of this study was to develop an analytical method for determining 15 polycyclic aromatic hydrocarbons (PAHs) of EU priority using gas chromatography (GC)-tandem mass spectrometry (MS). The PAHs in ground coffee were analyzed after being extracted using methods such as saponification-liquid-liquid extraction, Soxhlet extraction, and solid-liquid extraction. The solid-liquid extraction method showed the greatest repeatability and most efficient reduction of the matrix effect. GC-tandem MS for the quantification of the 15 PAHs showed better resolution and lower limit of detections (LODs) than GC-MS-selected ion monitoring (SIM) and high performance liquid chromatography with fluorescence detector. LODs of this method for the ground coffee types were 0.002-0.1 ${\mu}g/kg$ and limit of quantifications (LOQs) were 0.006-0.2 ${\mu}g/kg$ The recoveries ranged from 52.6 to 93.3%. Forty-six commercial types of ground coffee were analyzed to determine their PAHs contamination levels. PAHs concentration ranged from ND to 5.988 ${\mu}g/kg$. This study was conducted with toxicity equivalence factors, the U.S. EPA recommendation to identify dietary risks for PAHs in different types of coffee. The estimated average daily dose of PAHs was $5.24{\times}10^{-8}$ mg/kg body weight/day.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.125-136
• /
• 2013

Purpose: The aim of this study was to investigate the effect of improving read speed with color filter or without color filter to improve reading disorder of teenager who were diagnosed as Meares-Irlen syndrome through survey inspection with Meares-Irlen syndrome visual stress (MISViS) score. Methods: MISViS subjects were selected from screening survey MISViS results given above 2.13 in the clinical criteria scores (MISViS score). Reading speed were measured quickly and efficiently the rate of reading via test in which randomly ordered common words are read aloud during a minute. Each of the subjects were worn a filter of the lowest concentration in each color filter group composed of 15 groups. Results: MISViS score of MISViS group and control group were 2.57 and 0.66, respectively. Results of reading speed with filter and without filter in MISViS group were $102.27{\pm}27.86$ wpm and $118.87{\pm}26.99$ wpm (p=0.001), respectively, as well as were $132.93{\pm}6.88$ wpm and $133.43{\pm}6.64$ wpm (p=0.131) in the normal group. Associated with error changes with filter and without filter between two groups, skipping in MISViS Group were from $0.25{\pm}0.62$ times to 0 times (p=0.191), Errors were from $1.83{\pm}1.69$ times to $0.17{\pm}0.38$ times (p = 0.004) and, repetitions were 0. skipping in control group were 0 times, errors were from $0.21{\pm}0.43$ times to $0.07{\pm}0.27$ times (p=0.336) and, repetitions were from $0.14{\pm}0.36$ times to 0 (p=0.165). The filter of blue series chosen in MISViS group had higher percentage (40%), whereas, subjects in normal group were more likely to prefer the filter of gray color (29%). Conclusions: This study showed that MISViS score have been used as a significant diagnosis for Irlen syndrome screening. This study found that wearing suitable color filter for MISViS patients were useful to improve learning with regard to reading. Unique color filter selection for MISViS subjects must be carefully considered since fit color filter are different personally.

• Clinical and Experimental Pediatrics
• /
• v.50 no.9
• /
• pp.905-911
• /
• 2007

Purpose : Ghrelin, being secreted from the stomach, stimulates growth hormone secretion and controls energy homeostasis by increasing appetite. Leptin, being secreted from the adipocytes, controls weight and energy homeostasis by decreasing appetite. Leptin concentration is reported to increase after childhood cancer therapy. This study was aimed to compare ghrelin and leptin concentrations in normal children and children who received cancer therapy. Methods : We enrolled forty-three patients who were diagnosed with cancer and received radiotherapy or chemotherapy during Dec. 2004 through Dec. 2005 in St. Marys hospital and Kangnam St. Marys hospital. Forty-five healthy children were selected as a control group whose age, gender, weight and height were similar to those of cancer group. The serum leptin and ghrelin concentrations were also measured by radioimmunoassay. Results : The cancer group showed higher BMI and leptin concentrations. The control group showed higher concentrations of ghrelin. Both control and cancer groups revealed positive correlations between leptin concentrations and BMI. Ghrelin concentrations in the control group showed negative correlations with age, height, weight and BMI but no significant correlation was found in the cancer group. All the parameters in the group treated with chemotherapy only were not different from those in the group treated with chemotherapy and irradiation. But the level of ghrelin in the acute myeloid leukemia group was much higher than those in the acute lymphoblastic leukemia group. Conclusion : Patients with pediatric cancer treatment have presented higher BMI and leptin concentrations but lower ghrelin concentrations than those in healthy children. Because of the relatively short duration and cross sectional method of the study, however, further long term and prospective study will be required in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1360-1365
• /
• 2007

The purpose of this study is to present the basic data for nonpoint pollutant loads from bridge road drainage sediments using the results to analyze organic matter and heavy metals from the four bridge drainage sampling sites with sediments of different particle size ranges. The sediment sample was collected from the bridge road drainage and the masses of nine sediments fractions were obtained after drying the separated sediment in an over at $85^{\circ}C:>2,000{\mu}m$, $1,000\sim2,000{\mu}m$, $850\sim1,000{\mu}m$, $425\sim850{\mu}m$, $212\sim425{\mu}m$, $125\sim212{\mu}m$, $90\sim125{\mu}m$, $75\sim90{\mu}m$, $<75{\mu}m$. The sediment extract was analyzed water quality constituents, including chemical oxygen demand(COD), total nitrogen(T-N), total phosphorus(T-P), heavy metals and particle size distribution. The results indicate that most of particle size ranges of the bridge road sediments was $125\sim425{\mu}m$, and portion of $<75{\mu}m$ was low. But most of the pollutants are associated with the finer fractions of the load sediments. As the results of analysis, the range and average values of COD, T-N, T-P, Fe, Cu, Cr, and Pb were $177\sim198.8$ mg/kg(77.6 mg/kg), $23\sim200$ mg/kg(83 mg/kg), T-P $18\sim215$ mg/kg(129 mg/kg), and $1,508\sim5,612$ mg/kg(3,835 mg/kg), $9.2\sim69.3$ mg/kg(49 mg/kg), $19.1\sim662.2$ mg/kg(214 mg/kg), and $28.4\sim251.4$ mg/kg(114 mg/kg), respectively. The relationship between sediment size and pollutants concentration have an inverse proportion. The removal of road sediments with frequently could be reduced the significant nonpoint pollutant load, because of the bridge road sediment contains considerable micro-particles and heavy metals.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.281-290
• /
• 2018

In order to understand the long-term behavior of radionuclides in granite environments, geochemical behavior characteristics of uranium in granitic host rock of KURT (KAERI Underground Research Tunnel) were investigated by dissolution experiment with different reaction time and solutions. In the dissolution experiment, significantly increased dissolution levels of uranium from granite powder samples were identified during the reaction time of 0~10 days for reaction solutions ($UD-CO_3$ and UD-Bg) containing a large amount of $CO_3{^{2-}}$. On the other hand, significantly increased dissolution levels of uranium were also identified for reaction solutions containing Na and Ca after 60 days. Dissolution of uranium continuously increased in reaction solutions of $UD-CO_3$ ($44.61{\mu}g{\cdot}L^{-1}$), UD-Bg ($41.01{\mu}g{\cdot}L^{-1}$), UD-Na ($26.87{\mu}g{\cdot}L^{-1}$), UD-Ca ($20.26{\mu}g{\cdot}L^{-1}$), UD-CaSi ($17.03{\mu}g{\cdot}L^{-1}$), and UD-Si ($10.47{\mu}g{\cdot}L^{-1}$) in the experimental period of ~270 days. However, after day 270, dissolution of uranium showed a decreasing tendency. This is thought to have occurred because existing uranium in granite samples reached the limit of dissolution by interaction with reaction solutions. Concentrations of dissolved uranium and points of maximum concentration value were found to differ depending on the $CO_3{^{2-}}$ presence in the mixed reaction solution and on the geochemical type of the water. It is estimated that differences in the reaction rate between the granite sample and the reaction solution are due to the influence of dissolved ions in the reaction solution.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.2
• /
• pp.4645-4687
• /
• 1978

This study was attempted to investigate the mechanical properties of concrete and crack control effects of reinforced concrete with steel and glass fiber. The experimental program includes tests on the properties of fresh concrete containing fibers, compressive strength, tensile strength, flexural strength, Young's modulus, Shrinkage and deformation of steel or glass fiber reinforced concrete. Also this study was carried out to investigate the effect of steel or glass fiber to retard the development in reinforced concrete subject to uniaxial tension and thus facilitate the use of steels of higher strength. The major conclusions that can be drawn from the studies are as follows: 1. The effect of the fibers in various mixes on fresh concrete confirmed that fibers do have a significant effect on the properties of fresh concrete, bringing much more stable and exhibiting a signiflcant reduction in surface bleeding, and that the cohesion is greatly improved and the internal resistance increases with fiber concentration. But the addition of an excess contents and length of fibers brings about the reduction of workability. 2. With the addition of steel fibers(1.5% Vol.) to concrete, the compressive strength as compared with plain concrete showed a very slight increase, but excess addition, over 1.5% Vol. of steel and glass fiber reduced its strength. 3. Splitting tensile strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. In case of containing steel fiber (2.5%, 30mm), it showed that the maximum increase rate of 1.48 times as much rate, and in case of containing glass fiber (2.5%, 30mm), the increase rate of strength was 1.25 times as much rate. 4. Flexural strength of fiber reinforced concrete showed a significant tendency, as compared with plain concrete. Containing steel fiber (2.5%, 30mm) showed the maximum increase rate of 1.64 times as much rate and containing glass fiber (2.5%, 30mm) showed the increase rate of strength of 1.32 times as much rate, and in general, the 30mm length brougth the best results. 5. The strength ratio ($\sigma$b/$\sigma$c and $\sigma$t/$\sigma$c) increased, when steel fiber's average spacing was up to 3.05mm, but decreased when beyond 3.05mm, and it was confirmed that tensile or flexural strengths of steel fiber reinforced concrete are apparently governed by fiber's average spacing. 6. The compressive strain of fiber reinforced concrete showed a significant increasing tendency as the fiber was added, but Young's modulus. with the addition of steel and glass fibers, showed a slight decrease tendency. And according to the increase of flexural strength, a considerable increase was seen in toughness. 7. With the addition of fiber's the shrinkage of concrete was significantly decreased, in both case of adding steel fibers 12.5%, 30mm, and showed a significant decrease ratio, in average 30.4% and 36.7%, as compared with plain concrete. 8. With the increase of fiber volume fraction and length, the gained stress in reinforcing bar in concrete specimens increased in all crack widths, but at different rates, with the decrease of fiber diameter, the stress showed a considerable increasing tendency. And the duoform steel fibers showed the greatest improvement, as compared with the other types tested. 9. The influence of fiber dimensions in order of significanse on the machanical properties of concrete and the crack control of reinforced concrete was explained as follows: content, length, aspect ratio and dimeter.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.443-452
• /
• 2002

The objective of this study was to evaluate the effects of concentration(0, 0.5, 1, 1.5 and 2%)of lactic, citric and acetic acid on chemical and sensory characteristics of fresh pork loins. The pork loins were sprayed with organic acid by a hand sprayer for 15 sec at 30$^{\circ}C$, packaged under air and stored for 14 days at 4$^{\circ}C$ and then during the storage time analyzed for VBN, TBARS, color and sensory property. All treated loins showed lower(p<0.05) VBN and TBARS values than the control's. Two percents of organic acid was the most efficient than the rest of treatments(p<0.05). All of pork loins that were sprayed with organic acids had higher CIE L*value(p<0.05) during storage. However, on 14th day, L* value of meat treated with lactic and acetic acid in 1.5 and 2% concentrations was not different from that of initial fresh loins(0 days). According to the results of sensory test, lactic acid, citric acid and acetic acid did not affected bloody and off-flavor of the meat for one day at 4$^{\circ}C$. While the acetic acid spraying resulted in the strong sour flavor of meat after one day.

• Analytical Science and Technology
• /
• v.29 no.2
• /
• pp.94-103
• /
• 2016

An analytical method was developed to determine the amount of spinetoram (spinetoram J and spinetoram L) in livestock samples. The spinetoram was extracted with acetonitrile and purified through a primary secondary amine (PSA) sorbent. The spinetoram residues were then quantified and confirmed using a liquid chromatography–tandem mass spectrometer (LC-MS/MS) in the positive ion mode using multiple reactions monitoring (MRM). Matrix-matched calibration curves were linear over the calibration ranges (0.005-0.5 mg/kg) into a blank extract with r² > 0.994. The limits of detection and quantification were 0.002 and 0.01 mg/kg, respectively. The recovery results of spinetram ranged between 81.9-106.4% at different concentration levels (LOQ, 10LOQ, 50LOQ, n=5) with relative standard deviations (RSDs) less than 10%. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL40, 2003). An interlaboratory study was conducted to validate the method. The proposed analytical method proved to be accurate, effective, and sensitive for spinetoram determination. The method will be used as an official analytical method in Korea.